Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Fresnel modeling of hematite crystal surfaces and application to martian hematite spherules

The gray crystalline hematite at Meridiani Planum first discovered by the Mars Global Surveyor Thermal Emission Spectrometer (MGS-TES) instrument occurs as spherules that have been interpreted as concretions. Analysis of the TES and mini-TES spectra shows that no 390 cm⁻¹ feature is present in the characteristic martian hematite spectrum. Here, we incorporate the mid-IR optical constants of hematite into a simple Fresnel reflectance model to understand the effect of emission angle and crystal morphology on the presence or absence of the 390 cm⁻¹ feature in an IR hematite spectrum. Based on the results we offer two models for the internal structure of the martian hematite spherules.     

圆盘固相萃取富集-气相色谱法测定地表水中有机氯和有机磷农药

采用环境友好的圆盘固相萃取新技术富集水体中有机氯农药和有机磷农药,分别用微池电子捕获检测器(μECD)和火焰光度检测器(FPD)气相色谱法检测,实现了水中有机氯和有机磷农药残留物的测定。结果表明,16种有机氯农药的平均回收率为64.7%~102%,精密度(RSD,n=6)为2.9%~15%;13种有机磷农药的平均回收率为65.9%~104%,精密度(RSD,n=6)为1.7%~17%。方法快速、灵敏、低污染,可用于水体中多种有机氯农药和有机磷农药的残留分析。     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Control strategies for the Clam Wave Energy Device

A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction.     

东亚温带气旋及其长期预报（二）：预报应用分析

本文以赤道东太平洋海温作为主导因子，分析其与东亚温带气旋的关系。得出：高海温多气旋，低海温少气旋的对应关系较为明显。并进一步对不符合这种主要关系的年份从环流型。下垫面海温等作了分类鉴别分析。     

非线性洋面温度反演

本文从辐射方程出发，简述洋面温度与亮度温度之间的非线性关系，进行非线性洋面温度反演的方案设计，用正演算法 计算出非线性洋面温度反演公式的回归系数，对样进行检验。     

海水中234Th的超低水平液闪谱仪测定

本文提出了利用超低水平液闪谱仪测定海水中234Th的方法.海水经氢氧化铁吸附共沉淀富集后,接着用阴离子交换和TBP/煤油萃取进行Th同位素的分离与纯化.对一系列测定条件进行了详细的研究,提出了测定海水中234Th的适宜程序,即在含有234Th和产额示踪剂230Th的纯化后的5mol/dm3HNO3溶液中加入TBP/煤油进行萃取,然后用0.1mol/dm3HNO3反萃取,后者是先用契伦柯夫计数法测量234Th(通过234mPa),后加入闪烁液Hisafe 3用α/β模式测量α放射体230Th.对于α和β放射体液闪谱仪的计数效率分别为100%和55.7%±2.7%.234Th的化学回收率和总探测效率分别为70%～80%和30%～45%.该法测定海水中的234Th快速、简便和高效.     

崇明东滩沉积环境探讨

为探讨崇明东滩的沉积环境，了解崇明东滩的植被、水动力等对沉积的影响，对崇明进行了为期一年的实地观测和采样实验分析研究，研究结果表明：①沉积物中含有细砂、粉砂、黏土，其中粉砂是主要组分。塑造滩地的动力以潮汐作用为主，波浪作用居于次要地位；②沉积物的平均粒径自北线断面向南线断面、自高潮向低潮滩有逐渐变粗、分选变差的趋势，且平均粒径具有明显的季节变化；③潮滩季节性冲淤变化主要是与不同季节水文条件的差异性、潮滩植被季节变化及风暴天气等有关。     

Response of the barrier island coastal region of southwestern Nigeria to climate and non-climate forcing

Despite threats emanating from the influence of climate and non-climate forcing on the barrier island coastal region of southwestern Nigeria, the extent of the coastal erosion is poorly understood. We report evidence of coastal erosion and sediment accumulation in the region over a 34-year period (1973–2017), using Landsat imagery at intervals of approximately six years. Landsat image corrections and various water-extraction algorithms were used to systematically delineate coastal erosion and accumulation in the area. The region was subdivided into western and eastern subregions separated by Lagos Harbour. In the west, erosion took place during the periods 1973–1979, 1979–1984, 1990–1999 and 2005–2011, whereas in the east, erosion occurred during 1973–1979, 1990–1999 and 1999–2005. Coastal sediment accumulation occurred in the east during 1979–1984, 1984–1990, 2005–2011 and 2011–2017, whereas gains in the west occurred during 1984–1990, 1999–2005 and 2011–2017. The study revealed substantial net erosion of 1 228.1 ha in the region as a whole, over the full period. Sediment accumulation accompanying the coastal erosion appears to be linked to longshore drift. Erosion between 1973 and 2011 was probably attributable to climate change (storms and tidal conditions), longshore drift, the inflow and outflow of water at Lagos Harbour, coastal morphology and, possibly, human impacts. However, the coastal changes between 2011 and 2017 were more obviously associated with human activities, such as development of the Eko Atlantic construction project. Coastal surveillance, together with the use of environmentally sensitive protective measures, could possibly help to reduce coastal erosion in the region. Careful coastal management practices, including artificial nourishing and the installation of resilient structures (e.g. seawalls), should be undertaken to protect human settlements that are already at risk from sea-level rise.