地倾斜异常图像与地震预测

系统分析了1988～1998年期间新疆4个台站、5套地倾斜仪记录到的异常图像,发现与周围的4级以上及强远震有较好的对应关系.在对图像特征、典型震例研究的基础上,归纳了异常图像的识别标志、与地震关系的定性指标;对异常图像的可能机制作了初步讨论,认为可能是岩石临破裂前的裂隙扩展、断层预滑的直接记录;地倾斜异常图像的研究对地震的短临预报具有参考价值.     

利用高分辨率卫星影像进行地震损失评价所需的城市特征识别

高分辨率卫星影像已经在一些国家的民用领域得到应用。利用高分辨率卫星影像来收集地震损失评价所需要的各类城市信息不仅高效和有较好的时间分辨率，而且它可以减少以往所必需的大量的代价高昂且费力的城市调查。基于在印度城市台拉登所做的研究，讨论了如何利用高分辨率卫星影像进行城市特征识别的一些问题，同时也简单论述了利用GIS／RS软件综合所得的数据以便用于地震损失评价的方法。     

遥感图象自动识别城市震害房屋-以2001年印度库奇地震和1976年唐山地震为例

近断层地震动对地表结构物造成严重的破坏，它具有明显的方向性和脉冲型特征. 在速度时程中含有大幅值、长周期的脉冲波，对结构响应影响很大. 为简化计算和分析的需要，在既有的等效速度脉冲模型的基础上，建议了较为合理等效速度脉冲模型. 在充分收集脉冲型近断层地震记录的基础上，对等效速度脉冲模型的脉冲周期、脉冲强度及卓越脉冲数等参数进行了研究，并与以往研究者的结果进行比较，以利于近断层区结构的抗震设计.      

基于小波变换的遥感影像压缩编码

基于小波变换的图像压缩方法能在高压缩比的前提下保持好的重建图像质量,它的多分辨率特性与人类视觉系统非常相近,小波变换的编码技术被广泛地应用于遥感影像的压缩中。介绍了小波理论的相关知识,着重对嵌入零树小波、等级树分割、小波数据的形态学表示算法等方法进行了详细的论述,并对图像编码技术的发展方向进行了展望。     

Method of high-density seismic imaging ex-ploration and application samples

Introduction Now, shallow seismic reflection wave technique has been used extensively in geological ex-plorations of bridge, dam, high building and so on. Since shallow seismic reflection wave tech-nique is often implemented in industrial zone or city with dense population, the background dis-turbance including industrial noise, life noise, etc is very serious. Furthermore, the disturbance of seismic source is also serious due to short array length and offset of the method. In general, shal-lo…     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

BECAPEX科学试验城市建筑群落边界层大气环境特征及其影响

20 0 1～ 2 0 0 3年在北京实施了大气边界层动力、热力、化学综合观测试验 (BECAPEX ,BeijingCityAtmosphericPollutionObservationFieldExperiment) ,获取了北京城市大气动力和大气化学三维结构图像。综合观测试验分析研究发现 ,城市区域呈非均匀次生尺度热岛分布 ,并伴随着城市次生尺度环流 ,影响了局地空气污染物分布特征。MODIS卫星遥感 地面观测资料经过变分分析 ,可发现北京城市空气污染与周边区域影响源有密切关系 ,并影响城市群落环境气候特征 ,导致该区域日照、雾日、低云量和能见度呈显著年代际变化趋势。     

Accuracy analysis, dem generation and validation using russian tk-350 stereo-images

TK-350 stereo-scenes of the Zonguldak testfield in the north-west of Turkey have been analysed. The imagery had a base-to-height ratio of 0·52 and covered an area of 200 km × 300 km, with each pixel representing 10 m on the ground. Control points digitised from 1:25 000 scale topographic maps were used in the test. A bundle orientation was executed using the University of Hanover program BLUH and PCI Geomatica OrthoEngine AE software packages. Tests revealed that TK-350 stereo-images can yield 3D geopositioning to an accuracy of about 10 m in planimetry and 17 m in height. A 40 m resolution digital elevation model (DEM) was generated by the PCI system and compared against a reference DEM, which was derived from digitised contour lines provided by 1:25 000 scale topographic maps. This comparison showed that accuracy depends mainly on the surface structure and the slope of the local terrain. Root mean square errors in height were found to be about 27 and 39 m outside and inside forested areas, respectively. The matched DEM demonstrated a systematic shift against the reference DEM visible as an asymmetric shift in the frequency distribution. This is perhaps caused by the presence of vegetation and buildings.     

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.