AAC算法的大气校正复合改进算法

利用模拟数据,评价Autonomous Atmospheric Compensation(AAC)算法的抗噪性,认为AAC算法的抗噪性较弱。基于TASI实测数据,利用AAC算法开展反演计算时,计算结果呈现出多样性问题。结合In-scene Atmospheric Compensation(ISAC)算法中黑体像元的标定方法,提出了一种复合改进算法。首先,利用ISAC算法反演的大气透过率和路径辐射,重新计算AAC算法中大气透过率之比(Tr)和相邻两强弱吸收通道的路径辐射之差(Pd),再次,运用经验公式获得稳定的大气反演结果(大气透过率和路径辐射),有效解决了计算结果多样性的问题。利用复合改进算法,开展的温度与发射率分离实验,证明反演得到的发射率波谱更接近野外实测波谱。     

水质关键因素光谱遥感监测技术分析

针对传统水体水质分析方法过度依赖于实地测量和实验室化学分析,需要耗费大量人力物力且效率不高的问题,从水质遥感监测数据获取手段、典型反演监测模型、不同水体光谱遥感监测应用状况、水质遥感监测技术应用及前景等方面分析归纳了使用遥感技术监测水质的新方法。从可用数据类型、数据特征等方面对水质遥感监测数据获取的3种主要手段进行了比较;从复杂程度、使用场景、优缺点等方面对4种典型的反演模型进行了归纳;对遥感数据和模型在Ⅰ类和Ⅱ类水体应用中的常用组合方式进行了分析总结。     

涉及埃达克岩实验的若干基本概念与问题辨析

根据热力学原理,部分熔融是相变的一种表现形式。当岩石沿p-T轨迹穿过固相线时即可发生熔融。自然界岩石常见的不一致熔融行为可以导致残留相具有不同于源岩的整体成分与矿物组合。残留相与源岩可以属于不同的变质相,岩性也可以不同。"C型埃达克岩"含有含水矿物,它们不是干体系熔融的产物。实验岩石学研究表明,基性成分(SiO_250%)体系较中性、酸性体系在1.0~2.0 GPa压力条件下失水熔融时更易于形成"榴辉岩质"的残留相。源岩除SiO_2以外的其它主要氧化物会影响残留相中各矿物的比例,进而影响熔体的Sr、Y及HREE含量。因此,"C型埃达克岩"高Sr低HREE特征的形成取决于熔融温压条件以及源岩的主量元素、微量元素组成等多重因素。高钾含量(K_2O≈1.0%)的基性、中基性源岩形成的熔体成分与"C型埃达克岩"相比过于富Al或富Na。中等富钾的基性源岩的低程度熔融可以形成高硅的"C型埃达克岩",但无法形成中性的"C型埃达克岩"。     

固相吸附毒素跟踪技术(SPATT)在浙江南麂海域的应用

浙江南麂岛海域是我国近岸贝类的重点养殖区,近年来一直遭受脂溶性贝类毒素(lipophilic shellfish toxins,LSTs)的污染,威胁着人类健康。为了建立有效的食品安全预警方法,本研究利用固相吸附毒素跟踪技术(solid phase adsorption toxin tracking,SPATT)在该海域进行了为期一年的野外监测和LSTs毒素分析。结果表明:7种LSTs毒素在SPATT(DIAION?HP20)中被检出,分别是大田软海绵酸(okadaic acid,OA)、鳍藻毒素-1(dinophysistoxin-1,DTX-1)、虾夷扇贝毒素(yessotoxin,YTX)及其衍生物homo YTX、扇贝毒素-2(pectenotoxin-2,PTX-2)及其衍生物7-epi-PTX2sa和环亚胺毒素(gymnodimine,GYM);有8种毒素在厚壳贻贝(Mytilus galloprovincialis)中被检出,分别是OA、DTX1、homo YTX、PTX2、7-epi-PTX2sa、GYM、原多甲藻酸贝类毒素-3(azaspiracid-3,AZA-3)和虾夷扇贝毒素衍生物45-OH-homo YTX。整体而言,SPATT(HP20)中吸附的毒素种类与贝肉中监测出的毒素种类大体上一致,且两者间OA、DTX1和PTX2的浓度在时间上具有较好的相关性,可见SPATT(HP20)对这些LSTs毒素具有较高的灵敏度,有望作为水体中LSTs毒素的预警监测材料。南麂岛海域LSTs分布特征明显,夏季最高,其次是春秋季,冬季最低,其中2014年夏季贝肉中OA毒素含量高达77.19ng/g贝肉,超出国家限量标准(45ng/g贝肉)比例达11.76%,为浙江南麂海域贻贝的食用安全带来隐患。     

Stability and capsizing analysis of nonlinear ship rolling in wind and stochastic beam seas

Considering the actual seaway condition, stability and capsizing of nonlinear ship rolling system in stochastic beam seas is of significant importance for voyage safety. Safe zone are defined in the phase space plan of the unperturbed Hamilton system to qualitatively distinguish ship motions as capsize and noncapsize. Capsize events are defined by solutions passing out of the safe zone. The probability of such an occurrence is studied by virtue of the random Melnikov function and the concept of phase space flux. In this paper, besides conventional wave excitation, the effect of wind load is also taken into account. The introduction of wind load will lead to asymmetry, in other words, it transforms the symmetric heteroclinic orbits into asymmetric homoclinic orbits. For asymmetric dynamical system, the orbital analytic solutions and its power spectrum are not readily available, and the technique of discrete time Fourier transformation (DTFT) is used. In the end, as verification of theoretical critical significant wave height, capsizing probability contour diagram is generated by means of numerical simulation. The contour diagram shows that these analytical methods provide reliable and predictive results about the likelihood of a vessel capsizing in a given seaway condition.     

A novel method to estimate mineral compositions of mudrocks: A case study for the Canadian unconventional petroleum systems

The mineral composition of mudrocks is an essential attribute in controlling the reservoir quality of unconventional petroleum systems. The present study introduces a semi-quantitative method to estimate mineral phases of mudrocks in various Canadian unconventional hydrocarbon systems using total elemental analysis (inductively coupled plasma-mass spectrometry (ICP-MS)) and Rock-Eval data (total organic carbon (TOC) and mineral carbon (MinC)).This method involves statistical analysis based on a sound knowledge of hydrocarbon source rock inorganic geochemistry. The workflow can be divided into four steps: (i) converting major elements (Si, Al, Fe, K, Na, Ca, Mg, Ti, and P) to their oxides, (ii) inferring modes of occurrence of elements using statistical analysis of geochemical data (major elements, TOC, and MinC), (iii) identifying the mineral types (oxide, aluminosilicates, carbonates, sulfide, and phosphate) according to elemental occurrences and calculating mineral phase concentrations, and (iv) verifying the results by comparing to XRD data on selected samples. The results, especially for brittle minerals such as quartz, carbonates (e.g. calcite, dolomite, and ankerite), and pyrite, show that the estimated mineral compositions correspond closely and consistently with measured mineralogy obtained from XRD. This method takes advantage of bulk geochemical data already available for hydrocarbon potential and chemostratigraphic studies, without devoting additional samples and cost for XRD analysis.     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

柴达木盆地东部上石炭统克鲁克组碎屑岩储层特征及控制因素

柴达木盆地上石炭统克鲁克组是该区重要的古生界勘探层位,组内发育多套良好的碎屑岩层。为探究其岩石物性特征及控制因素,本次以野外露头调查为基础,利用普通薄片、铸体薄片鉴定及扫描电镜等手段,结合物性测试和压汞资料,对克鲁克组碎屑岩纵向分布规律,储层岩性、物性、孔喉特征及孔隙类型进行分析。认为克鲁克地层中克2段发育的三角洲前缘亚相和克3段的具障壁海岸潮坪相的大套含砾粗砂岩、粗砂岩砂体原生、次生孔洞发育,孔喉大、分布集中、分选好,为有利的碎屑岩储层。早成岩期压实作用、重结晶及胶结作用对克鲁克组砂岩的原生孔隙破坏严重,晚成岩期储层改造形成的溶孔、裂缝—溶孔是油气成藏的主要储存空间。该研究为预测柴东石炭系克鲁克组油气有利区域提供依据,为今后该地区的油气勘探提供理论支撑。     

黑龙江通河县曙光石场地区土壤地球化学特征与成矿预测

为查明曙光石场地区各成矿元素和矿(化)体的分布特征,在1∶2万土壤地球化学测量的基础上,对研究区多种成矿元素进行聚类分析和因子分析。研究表明:区内Ag、Pb、Zn、Bi、Sn单元素异常个数多、变异系数值较高,具有较强的成矿潜力;区内Ag-Pb-Zn元素组合异常套和极好,异常强度较强,与岩浆热液型成矿作用相关,具有较好的找矿前景;根据单元素异常的套合情况及元素共生组合规律圈定组合异常六处并进行了槽探工程验证,在Ht-4组合异常处发现一铅锌银矿点,矿体、矿化体产于上石炭统唐家屯组流纹质凝灰岩中。     

落石冲击混凝土板与缓冲层组合结构的动力响应

钢筋混凝土（RC）板与一定厚度的土颗粒缓冲层组合结构被广泛用于山区高位单体及群发性崩塌落石的防治,为研究此类防护结构在落石作用下的冲击力衰减规律及RC板的破坏模式,开展了室外系列落石冲击试验。结果表明,增大缓冲层厚度能够有效减小最大冲击力,峰值加速度随缓冲层厚度减小而增大,尤其在缓冲层厚度为0.1 m及0.2 m时,最大值急剧增大,峰值加速度与缓冲层厚度的变化满足指数函数关系;根据量纲分析原理得到缓冲层最大冲击深度与动能的平方成正比、与最大入射冲击力成反比的计算公式,且与实测值较吻合;入射冲击力在缓冲层内的衰减率随缓冲层厚度的增加以指数函数递增,在0.6 m缓冲层厚度下可使峰值冲击力衰减70%左右;随累积冲击能级的增大,RC板经历了弯曲起裂及扩展、次级弯曲裂纹和剪裂纹产生及跨中弯曲裂纹贯通的过程,试验结束时RC板整体表现出典型的弯曲破坏特征。