基于共反射点叠加的观测参数选择

在地震勘探数据处理中，通常采用的共中心点(CMP)叠加技术对于复杂的地质构造难以取得好的效果。若通过从道间距、覆盖次数等观测参数与目标层地层倾角、共反射点离散度的关系出发，并结合模型正演，对复杂构造地层的观测参数选取进行优化，使之能对目标层尤其是逆断层下降盘的阴影层段进行较充分的“照明”，即可得到共反射点叠加剖面，这对共反射点叠加是一项有益的研究。     

始新世大洋环流模拟的模式依赖性

随着模式的复杂化和多元化发展, 国际上不仅组织了现代气候模拟的模式比较计划, 也开展了古气候模拟的比较计划。在模式比较计划中, 如何有效处理模式间的差异和剔除模式依赖性已成为重要问题。本项研究基于国际深时多模式比较计划(DeepMIP)中的始新世大洋环流模拟结果, 选取pCO₂倍增试验、模式参数化、古地理边界条件这3个案例, 深入分析模式依赖性如何影响古气候模拟结果和模式之间差异性, 归纳和总结古气候模拟研究中模式依赖性产生的可能原因。结果显示, 部分模式的关键变量对驱动因子响应过于敏感、模式参数化方案过于简单、模式中对古地理边界条件表达的欠准确性均可导致模式依赖性的产生以及模式之间显著差异。这表明在分析数值模式结果时, 需要参考多模式结果, 并特别关注模拟结果变化的各个环节, 从而减少模式依赖性的干扰, 增加模拟结果的准确性, 以便于更加准确认识气候环境演变过程。

     

岩石空心圆柱扭剪仪研制的重点问题及研究进展

随着深部岩体工程的发展,开挖卸荷导致的应力主轴旋转问题引起了广泛关注。首先,分析总结了岩体工程中存在的应力主轴旋转问题及其对岩体工程稳定性的影响;其次,介绍了土体空心圆柱扭剪仪的发展现状及其特点,从荷载的施加方式、试样尺寸两个方面指出了研制岩石空心圆柱扭剪仪的关键问题,并与土体空心圆柱扭剪仪进行了对比,提出了新的扭矩施加技术和合理的岩石空心圆柱试样尺寸;最后,总结概括了考虑应力主轴旋转的土体本构模型的研究成果,并对考虑应力主轴旋转的岩石本构关系的研究进行了展望。该工作将对岩石空心圆柱扭剪仪的研制和相关理论的研究提供一定的参考和指导。     

澜沧—耿马7.6级地震前中小地震活动信息熵和分维的研究

从信息论原理和分形几何学的观点出发,采用多种方法,分析研究1988年澜沧—耿马7.6级地震前地震活动的信息、信息熵和分维的变化特征表明,地震前1—2年内,中、小地震活动的信息熵、缺信量和容量维、信息维出现明显的低值变化过程,反映了地震前兆的减熵、降维特点,从一个侧面反映了大震前,一定区域内中、小地震活动的时空变化从无序向有序的演化过程。     

激光测高数据辅助卫星成像几何模型精化处理

资源三号02星搭载了中国首个对地观测试验性激光测高载荷。借鉴目前较成熟的卫星影像区域网平差理论的基础上,结合近年来激光测高数据精度的大幅提升以及资源三号02星激光测高数据的特点,首次提出了激光测高数据辅助卫星立体影像进行成像几何模型精化处理的通用理论。首先,利用传统的区域网平差算法对所处理影像进行高精度连接点匹配处理,并对其进行无约束的自由网平差处理,获得高精度相对精度及不亚于原始成像几何模型的绝对精度;其次,根据激光测高数据3维坐标和精化后参考影像成像几何模型获取激光数据参考影像坐标;而后将参考影像坐标通过几何模型映射获取目标影像上待匹配影像坐标,通过连接点匹配算法,对待匹配目标影像坐标进行精化获取高精度像方同名点;最后,以同名点作为高程控制进行区域网平差计算,对影像成像几何模型进一步处理,获取高精度补偿参数。通过湖北、青海两测区的试验,以激光测高数据辅助卫星影像几何模型精化精度可分别达到1.97 m、3.23 m,结果表明本文提出的方法可有效提高卫星立体数据测图精度。     

428XL系统死机故障分析与排解方法

在大港探区新港Ⅰ期三维地震勘探中,428XL系统频繁出现了死机现象,如开机后仪器无故停止执行各项操作、放炮时系统操作窗口跳出软件错误信息、窗口之间可相互切换但软件却无法执行操作命令、采集数据流程被中断等。根据现场采取的降低系统软件版本等应急措施所呈现的效果及对428XL死机现象分析,认定这类故障是由于软件的兼容性存在问题所致。据此提出了使用超级排列、现场降级系统软件版本及强行中断server运行等方法,以解决428XL系统死机故障。     

Intensity of in‐lake processes in floodplain lakes within the Bug River zone of fluvial activity

The paper presents a new approach to calculating the erosion and deposition values of floodplain lake basins, the erosion–deposition index (EDI). The EDI is a sum of the basin geometry indices (BGIs), which can be calculated for a separate cross section of the lake. The distribution of processes within the basin was investigated in two selected floodplain lakes with the use of BGIs. Field research was carried out in the Bug River valley from 1 November 2006 to 31 October 2011. The highest erosion was observed in the lakes located close to the parent river. Deposition processes were observed in lakes with high inflow of groundwater. The results showed that EDI values of 48 out of the 71 floodplain lakes ranged from ?0.2 to 0.2. Spatial distribution of erosion and deposition processes within the lake basins resulted from a velocity of water inflowing or flowing through the basin. This was observed especially in contrafluent–confluent lake. Inflow of rivers water via upstream crevasse occurred later than via downstream one, but energy of flowing water was higher, which favoured erosion of this part of the lake basin. Copyright © 2013 John Wiley & Sons, Ltd.     

A test of granulometric control of desert dune geometry

I. G. Wilson's hypothesis of coarse-tail grain-size control of dune spacing was derived from three dunefields in the Sahara and, although it was supplemented by measurements of spacing from other parts of the world, the grain-size data come only from North Africa. In this paper the hypothesis is tested in the Australian dunefields. Australian dunes do not form separate categories on a P₂₀/s (twentieth percentile/spacing) plot and, when placed on Wilson's diagram, the Australian data form a continuum between dunes and draas. Ripples maintain their identity, suggesting that the average saltation length of sand controls ripple wavelength while dunes and Wilson's draas are formed by secondary flow of some kind. In Australia the spread of data on the P₂₀/s diagram indicates that grain-size is not the prime control on s. Data from Australia and the Sahara indicate that direct linear relationships between s and h (dune spacing and height means respectively for blocks of dunes) occur but they have different slopes in different areas. These differences possibly reflect variations in vegetation and substrate as well as differences in wind regime. The separation of dunes from draas in the Sahara reflects the greater role of grain-size in an area where coarse grains frequently occur in dune crests. The relative paucity of coarse grains in Australian dune crests may reflect the fine-grained alluvium from which the dunes are derived. These differences may be ascribed to differing topography in Australia and the Sahara.     

利用“L-R”剖分及三角形聚合的近似等面积菱形格网建模

球面菱形格网因其几何结构简单、方向一致、径向对称等特性,在空间操作和数据集成方面有着广泛的应用。本文基于“纬线环法”构建了球面四元三角剖分模型,分析了该方法带来的格网单元面积变形及其位置分布,发现该模型的三角单元面积变形具有“锯齿状”分布特征,即相邻的上下两个格网单元总是一大一小交替分布,而且变形方向一致。据此通过合并上下两个相邻三角形格网单元,构建了一种近似等面积的菱形剖分模型。结果表明,相比较于其他球面菱形格网生成方法,该方法计算简单、格网单元方向一致（长轴沿南北向分布）;同时,格网单元的面积变形更小、分布更加均匀。     

Channel geometry of mountain streams in New Zealand

A dataset of 21 study reaches in the Porter and Kowai rivers (eastern side of the South Island), and 13 study reaches in Camp Creek and adjacent catchments (western side of the South Island) was used to examine downstream hydraulic geometry of mountain streams in New Zealand. Streams in the eastern and western regions both exhibit well-developed downstream hydraulic geometry, as indicated by strong correlations between channel top width, bankfull depth, mean velocity, and bankfull discharge. Exponents for the hydraulic geometry relations are similar to average values for rivers worldwide. Factors such as colluvial sediment input to the channels, colluvial processes along the channels, tectonic uplift, and discontinuous bedrock exposure along the channels might be expected to complicate adjustment of channel geometry to downstream increases in discharge. The presence of well-developed downstream hydraulic geometry relations despite these complicating factors is interpreted to indicate that the ratio of hydraulic driving forces to substrate resisting forces is sufficiently large to permit channel adjustment to relatively frequent discharges.