Environmental geology problems in the Tyrrhenian coastal area of Santa Marinella, province of Rome, central Italy

 The Tyrrhenian resort of S. Marinella (central Italy) is subjected to significant anthropogenic pressures during the summer vacation period, a common situation all along the Italian coast. Located 65 km NW of Rome on the southern slopes of the Tolfa Mountains, S. Marinella is built on a gently sloping, E–W trending belt which is cut by 14 N–S oriented ephemeral streams that discharge into the Tyrrhenian Sea. The low to medium permeability turbiditic sandstones which outcrop along this belt belong to the Late Cretaceous Pietraforte unit. Three environmental problems are addressed in this study. The first problem is related to the high water supply demand during the summer months which has forced local residents to dig a large number of wells. Extensive pumping from these wells has caused salt-water intrusion into the Pietraforte, thus compromising the domestic use of the groundwater. The second problem consists of the illegal dumping of urban solid waste, material that represents a hazard during significant rain events as well as a possible cause of groundwater contamination. The final issue addressed concerns the flooding potential of the 14 ephemeral streams that cross the inhabited area of S. Marinella, a risk which is highlighted by the disastrous flood which occurred on 2 October 1981 and during the period of the Roman Emperor Settimio Severo (205 A.D.). Some suggestions are proposed to mitigate and contain the effects of these problems. Received: 7 November 1995 / Accepted: 5 December 1996     

Probabilistic seismic hazard zonation of Syria

Earthquake hazard maps for Syria are presented in this paper. The Peak Ground Acceleration (PGA) and the Modified Mercalli Intensity (MMI) on bedrock, both with 90% probability of not being exceeded during a life time of 50, 100 and 200 years, respectively are developed. The probabilistic PGA and MMI values are evaluated assuming linear sources (faults) as potential sources of future earthquakes. A new attenuation relationship for this region is developed. Ten distinctive faults of potential earthquakes are identified in and around Syria. The pertinent parameters of each fault, such as theb-parameter in the Gutenberg-Richter formula, the annual rate ₄ and the upper bound magnitudem ₁ are determined from two sets of seismic data: the historical earthquakes and the instrumentally recorded earthquake data (AD 1900–1992). The seismic hazard maps developed are intended for preliminary analysis of new designs and seismic check of existing civil engineering structures.     

Comparison of two methods for seismic hazard assessment in a low-seismicity area

The EGO method, developed by Egozcue et al. and the SRAMSC method, originally developed by Cornell and later programmed by McGuire, to assess the seismic hazard, are compared for the low seismicity area Belgium, The Netherlands, and NW Germany. Using the same input data, the results of the EGO method without the majority criterion and the SRAMSC method with upper bound XII agree very well. The influence of the zoning is investigated for the EGO method. It is not necessary to define the zones for the EGO method so strictly as for the SRAMSC method, but too wide zones can give bad results.     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

The effects of carbon dioxide leakage on fractures, and water quality of potable aquifers during geological sequestration of CO2

Since industrial revolution, the ＂greenhouse effect＂ is one of the most important global environmental issues. Of all the greenhouse gases, CO2 is responsible for about 64% of the enhanced ＂greenhouse effect＂, making it the target for mitigation, so reducing anthropogenic discharge of carbon dioxide attracts more and more attention. Geological sequestration of CO2 in deep saline aquifers is one of the most promising options. But because unknown fractures and faults may exist in the caprock layers which can prevent the leakage of CO2, CO2 will leak upward into upper potable aquifers, and lead to adverse impacts on the shallow potable aquifers. In order to assess the potential effect of CO2 leakage from underground storage reservoirs on fractures and water quality of potable aquifers, this study used the non-isothermal reactive geochemical transport code TOUGHREACT developed by Xu et al to establish a simplified 2-D model of CO2 underground sequestration system, which includes deep saline aquifers, caprock layers, and shallow potable aquifers, and study and analyze the changes of mineral and aqueous components. The simulation results indicated that the minerals of deep saline aquifers and fractures should be mainly composed of aluminosilicate and silicate minerals, which not only enhance the mass of CO2 sequestrated by mineral trapping, but also decrease the porosity and permeability of caprock layers and fractures to prevent and reduce CO2 leakage. The results from deep saline aquifers showed that the mass of carbon dioxide trapped by minerals and solution phases is limited, the rest remained as a supercritical phase, and so once the caprock aquifers have some unknown fractures, the free carbon dioxide phase may leak from CO2 geologic sequestration reservoirs by buoyancy.     

Seismic potential of Southern Italy

To improve estimates of the long-term average seismic potential of the slowly straining South Central Mediterranean plate boundary zone, we integrate constraints on tectonic style and deformation rates from geodetic and geologic data with the traditional constraints from seismicity catalogs. We express seismic potential (long-term average earthquake recurrence rates as a function of magnitude) in the form of truncated Gutenberg–Richter distributions for seven seismotectonic source zones. Seismic coupling seems to be large or even complete in most zones. An exception is the southern Tyrrhenian thrust zone, where most of the African–European convergence is accommodated. Here aseismic deformation is estimated to range from at least 25% along the western part to almost 100% aseismic slip around the Aeolian Islands. Even so, seismic potential of this zone has previously been significantly underestimated, due to the low levels of recorded past seismicity. By contrast, the series of 19 M6–7 earthquakes that hit Calabria in the 18th and 19th century released tectonic strain rates accumulated over time spans up to several times the catalog duration, and seismic potential is revised downward. The southern Tyrrhenian thrust zone and the extensional Calabrian faults, as well as the northeastern Sicilian transtensional zone between them (which includes the Messina Straits, where a destructive M7 event occurred in 1908), all have a similar seismic potential with minimum recurrence times of M ≥ 6.5 of 150–220 years. This potential is lower than that of the Southern Apennines (M ≥ 6.5 recurring every 60 to 140 years), but higher than that of southeastern Sicily (minimum M ≥ 6.5 recurrence times of 400 years). The high seismicity levels recorded in southeastern Sicily indicate some clustering and are most compatible with a tectonic scenario where the Ionian deforms internally, and motions at the Calabrian Trench are small. The estimated seismic potential for the Calabrian Trench and Central and Western Sicily are the lowest (minimum M ≥ 6.5 recurrence times of 550–800 years). Most zones are probably capable of generating earthquakes up to magnitudes 7–7.5, with the exception of Central and Western Sicily where maximum events sizes most likely do not exceed 7.     

CQK-50型车载化钻机的研制

在分析研究小型地质车载钻机的形式、功能与特点的基础上，提出了钻机车载化的新思路。根据地质调查工作现状，结合国内现有小型地质取样钻机，研制了CQK-50型全液压多功能车载取样钻机，并在野外物化探遥感异常验证钻探中取得了良好效果。     

我国地质找矿取心（样）钻探设备现状及提高效能的分析研究

概述了我国地质找矿钻探市场现状及前景，分析研究了地质取样钻探传统的立轴钻机及全液压动力头钻机的优缺点及综合效能，针对国家提出加强地质工作的形势及中国的实际状况，提出了完善和改进我国现有钻探设备、提高我国地质找矿取样钻探效率、降低能耗及成本的观点及建议。     

虚拟样机技术在地质工程机械领域的应用研究

基于对国内地质工程机械的研发现状的考虑，根据虚拟样机技术的特点，讨论了在地质工程机械领域实施虚拟样机技术的必要件，并提出了建立地质工程机械虚拟样机的策略。联合PRO／E、ANSYS及ADAMS建立了气动潜孔锤的虚拟样机模型，对气动潜孔锤虚拟样机进行了仿真，阐明了虚拟样机技术在地质工程机械领域的应用前景。