Wind-driven interannual variability over the northeast Pacific Ocean

Interannual variability of the sea surface height (SSH) over the northeast Pacific Ocean is hindcast with a reduced-gravity, quasi-geostrophic model that includes linear damping. The model is forced with monthly Ekman pumping fields derived from the NCEP reanalysis wind stresses. The numerical solution is compared with SSH observations derived from satellite altimeter data and gridded at a lateral resolution of 1 degree. Provided that the reduced gravity parameter is chosen appropriately, the results demonstrate that the model has significant hindcast skill over interior regions of the basin, away from continental boundaries. A damping time scale of 2 to 3 years is close to optimal, although the hindcast skill is not strongly dependent on this parameter.A simplification of the quasi-geostrophic model is considered in which Rossby waves are eliminated, yielding a Markov model driven by local Ekman pumping. The results approximately reproduce the hindcast skill of the more complete quasi-geostrophic model and indicate that the interannual SSH variability is dominated by the local response to wind forcing. There is a close correspondence the two leading empirical orthogonal modes of the local model and those of the observed SSH anomalies. The latter account for over half of the variance of the interannual signal over the region.     

基于荧光原理的叶绿素a传感器校准方法研究

利用传感器对水体叶绿素a 浓度进行原位测量是获取实时、连续、长时间序列数据的重要手段。本文在对RBR 传感器和ECO（Environmental Characterization Optics）传感器进行原理分析和线性度、稳定性、重复性等基本性能测试的基础上，利用单一藻种培养液和2020年南海北部海域现场数据校准传感器，并对新的传感器校准系数进行验证。结果表明：两台传感器使用新系数比原出厂系数的叶绿素a 浓度测量准确度有明显提高。RBR 传感器现场数据校准系数的计算结果与叶绿素a 标准值误差最小，平均绝对误差从1.93 μg/L 减小到0.35 μg/L，平均相对误差从55.1%减小到10.9%；ECO 传感器藻液系数明显优于出厂系数和现场数据校准系数的计算结果，平均绝对误差从1.76 μg/L 减小到0.59 μg/L，平均相对误差从50.3%减小到15.1%。传感器测量准确度的提高，可为海洋环境监测、海洋生态灾害预警等工作获取真实可靠数据提供支撑。     

南沙群岛珊瑚礁地貌图像信息管理系统

运用面向对象的软件开发技术,结合珊瑚礁地貌学、计算机图像学和计算机信息管理技术,在Windows平台上研制开发出南沙群岛珊瑚礁地貌图像信息管理系统。该系统集文件管理、数据库管理和图形、图像管理于一体,具有信息检索输出、信息编辑和信息维护等功能,以图形用户介面交互,达到"所见即所得"的效果。     

Monitoring the Kuroshio Extension with Dynamically Constrained Synthesis of the Acoustic Tomography, Satellite Altimeter and in situ Data

A finite-difference quasigeostrophic (QG) model of an open ocean region has been employed to produce a dynamically constrained synthesis of acoustic tomography and satellite altimetry data with in situ observations. The assimilation algorithm is based upon the 4D variational data interpolation scheme controlled by the model's initial and boundary conditions. The data sets analyzed include direct and differential travel times measured at the array of five acoustic transceivers deployed by JAMSTEC in the region of the Kuroshio Extension in 1997, Topex/Poseidon altimetry, CTD soundings, and ADCP velocity profiles. The region monitored is located within the area 27.5°–36.5°N, 143°–155°. The results of assimilation show that mesoscale variability can be effectively reconstructed by five transceivers measuring direct and reciprocal travel times supported by relatively sparse in situ measurements. The misfits between model and data lie within the observational error bars for all the data types used in assimilation. We have compared the results of assimilation with the statistical inversion of travel time data and analyzed energy balances of the optimized model solution. Energy exchange between the depth-averaged and shear components of the observed currents reveals a weak decay of the barotropic mode at the rate of 0.2 ± 0.7⋅10⁻⁵ cm²/s³ due to topographic interaction. Mean currents in the region are unstable with an estimate of the available potential energy flux from the mean current to the eddies of 4.7 ± 2.3⋅10⁻⁵ cm²/s³. Kinetic energy transition has the same sign and is estimated as 2.8 ± 2.5⋅10⁻⁵ cm²/s³. Potential enstrophy is transferred to the mesoscale at a rate of 5.5 ± 2.7⋅10⁻¹⁸ s⁻³. These figures provide observational evidence of the properties of free geostrophic turbulence which were predicted by theory and observed in numerical experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

海洋调查数据的可视化建模及实现方法

科学计算可视化作为新一代的分析工具 ,正在进入物理海洋学领域。文中介绍对海洋调查数据进行可视化的关键问题——数据建模 ,并从分析海洋调查数据的特点出发提出针对海洋研究中可视化建模的原则和有效途径 ,给出相关的实现方法。其中 ,重点讨论局部体样条建模中必须面对的区域分割优化问题 ,引入遗传算法并给出较好的解决方案。     

黄河断流对河口空间场后效反馈的遥感复合信息研究

就黄河断流对河口空间场后效所涉及的地理要素的演变,以所建河口演变概念-遥感信息系统,分析研究了黄河口近期演变的互关联信息基础,并依据研究目标的信息需求分析(IRA)与水下地貌趋势面分析的结果,阐述了河口空间场诸种反馈信息、变异中直观信息及隐伏信息.     

Sources and hydrothermal alteration of organic matter in Quaternary sediments: A synthesis of studies from the Central Gulf of California

Deep sea drilling in the Central Gulf of California, a young and active spreading centre, shows that the high heat flow typical of these regions causes extensive alteration of sediment organic matter, especially near sills and above magma chambers where hydrothermal activity is concentrated. Even on the nearby passive margin, where there are no sills, heat flow is moderately high and hydrocarbon generation has begun in immature sequences. Migrating light hydrocarbons are detected especially where hydrothermal activity is concentrated. Thermogenic methane is more widespread, though not in the passive margin bordering the spreading centre. Despite the incidence of hydrocarbon generation and migration, the amounts of hydrocarbons involved are relatively small and apparently do not lead to commercially significant accumulations of petroleum.The organic matter in these sediments is mostly marine because the Gulf of California generally has low runoff from land and highly productive surface waters. Turbidites rich in terrigenous organic material are locally abundant in the mainly pelagic section in the Guaymas Basin. The highest concentrations of organic matter are found in laminated diatomites deposited on the Guaymas passive margin within the oxygen minimum zone.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.