Tracing sediment redistribution across a break in slope using rare earth elements

Experimentally determined spatial patterns of soil redistribution across a break in slope derived using 10 rare earth element (REE) oxides as sediment tracers are presented. An erosion experiment was conducted using simulated rainfall within a laboratory slope model measuring 2·5 m wide by 6 m long with a gradient of 15° declining to 2°. Soil was tagged with multiple REE and placed in different locations over the slope and at the end of the experiment REE concentrations were measured in samples collected spatially. A new method was developed to quantify the erosion and deposition depths spatially, the relative source contributions to deposited sediment and the sediment transport distances. Particle‐size selectivity over an area of net deposition was also investigated, by combining downslope changes in particle‐size distributions with changes in sediment REE composition within a flow pathway. During the experiment, the surface morphology evolved through upslope propagation of rill headcuts, which gradually incised the different REE‐tagged zones and led to sediment deposition at the break in slope and the development of a fan extending over the shallow slope segment. The spatial patterns in REE concentrations, the derived erosion and deposition depths, the relative source contributions to deposition zones and the sediment transport distances, corroborate the morphological observations and demonstrate the potential of using REE for quantifying sediment transport processes. Copyright © 2010 John Wiley & Sons, Ltd.     

Defining shore platform boundaries using airborne laser scan data: a preliminary investigation

As an initial evaluation of the potential of digital elevation models (DEMs) and geographic information systems (GISs) for geomorphic characterization of rocky shorelines, airborne laser scan (ALS) data have been used to characterize shore platforms around Shag Point, southeastern New Zealand. The platforms have been characterized using field‐based techniques in previously published research, and therefore offer an ideal site for evaluation purposes. The main challenge involved the delineation of the shore platform area in terms of landward and seaward extents. The cliff top and landward edge of the shore platform was readily mapped, whereas the seaward edge of platforms was mapped with lesser precision due to difficulties associated with tidal inundation and the interference of wave action and surface water. In the central region of the study area (～0·1 km²) higher platform elevations and dense point cloud data enabled the generation of a high‐resolution (1 m) DEM. In analysing the DEM, ALS offered an advantage over the previous field survey in respect of the ability to assess continuous topography in plan‐view. The extent and form of two distinctive erosional surfaces is clearly apparent and was revealed through classifications based on slope and elevation. The spatial continuity of the upper surface implies that, in addition to the role of rock structure described in previous work, sea level and wave exposure may have been important factors in the generation and preservation of platform morphology at Shag Point. Copyright © 2007 John Wiley & Sons, Ltd.     

Unstructured,anisotropic mesh generation for the Northwestern European continental shelf,the continental slope and the neighbouring ocean

A new mesh refinement strategy for generating high quality unstructured meshes of the Northwestern European continental shelf, the continental slope and the neighbouring ocean is presented. Our objective is to demonstrate the ability of anisotropic unstructured meshes to adequately address the challenge of simulating the hydrodynamics occurring in these three regions within a unique mesh. The refinement criteria blend several hydrodynamic considerations as the tidal wave propagation on the continental shelf and the hydrostatic consistency condition in steep areas. Several meshes illustrate both the validity and the efficiency of the refinement strategy. The selection of the refinement parameters is discussed. Finally, an attempt is made to take into account tidal ellipses, providing another cause for anisotropy in the mesh.     

Permanent earthquake‐induced actions in buried pipelines: Numerical modeling and experimental verification

Buried pipelines are often constructed in seismic and other geohazard areas, where severe ground deformations may induce severe strains in the pipeline. Calculation of those strains is essential for assessing pipeline integrity, and therefore, the development of efficient models accounting for soil‐pipe interaction is required. The present paper is aiming at developing efficient tools for calculating ground‐induced deformation on buried pipelines, often triggered by earthquake action, in the form of fault rupture, liquefaction‐induced lateral spreading, soil subsidence, or landslide. Soil‐pipe interaction is investigated by using advanced numerical tools, which employ solid elements for the soil, shell elements for the pipe, and account for soil‐pipe interaction, supported by large‐scale experiments. Soil‐pipe interaction in axial and transverse directions is evaluated first, using results from special‐purpose experiments and finite element simulations. The comparison between experimental and numerical results offers valuable information on key material parameters, necessary for accurate simulation of soil‐pipe interaction. Furthermore, reference is made to relevant provisions of design recommendations. Using the finite element models, calibrated from these experiments, pipeline performance at seismic‐fault crossings is analyzed, emphasizing on soil‐pipe interaction effects in the axial direction. The second part refers to full‐scale experiments, performed on a unique testing device. These experiments are modeled with the finite element tools to verify their efficiency in simulating soil‐pipe response under landslide or strike‐slip fault movement. The large‐scale experimental results compare very well with the numerical predictions, verifying the capability of the finite element models for accurate prediction of pipeline response under permanent earthquake‐induced ground deformations.     

苍山5.2级地震前十里泉电厂井地下水离子多组分的变化特征及机制讨论

１９９５年９月２０日山东苍山５．２级地震前,山东枣庄十里电厂水化学现观测井（Δ＝ｋｍ）水离子多组分出现了较为同步的异常变化。本文以此为基础,分析研究了这些异常的变化特征,讨论了异常出现的机制,研究认为,枣庄十里泉电厂水化学观测井水离子多组分的异常同步变化及相互印证,提高了异常的可信度;与水中常见离子组分相比,其中水汞的震前异常变化幅度最大,异常特征明显;十里泉电厂水化学观测井水离子多组分的同步异常     

Diel stream geochemistry,Taylor Valley,Antarctica

Unlike temperate and polythermal proglacial streams, the proglacial streams in Taylor Valley (TV), Antarctica, are derived primarily from glacier surface melt with no subglacial or groundwater additions. Solute responses to flow reflect only the interaction of glacial meltwater with the valley floor surrounding the stream channel. We have investigated the major, minor and trace element 24‐h variations of two proglacial melt streams, Andersen Creek and Canada Stream, originating from the Canada Glacier in TV, Antarctica. Both streams exhibited diel mid‐austral summer diurnal flow variation, with maximum flow being more than 50 times the minimum flow. Dissolved (< 0.4 µm) major, minor and trace solute behaviors through diel periods were strongly controlled by the availability of readily solubilized material on the valley floor and hyporheic‐biological exchanges. Anderson Creek had generally greater solute concentrations than Canada Stream because of its greater receipt of eolian sediment. Andersen Creek also acquired greater solute concentrations in the rising limb of the hydrograph than the falling limb because of dissolution of eolian material at the surface of the stream channel coupled with minimal hyporheic‐biological exchange. Conversely, Canada Stream had less available eolian sediment, but a greater hyporheic‐biological exchange, which preferentially removed trace and major solutes in the rising limb and released them in the falling limb. Given the dynamic nature of discharge, eolian, and hyporheic‐biological processes, solute loads in TV streams are difficult to predict. Copyright © 2012 John Wiley & Sons, Ltd.     

地磁活动对气候要素影响的研究进展

地磁活动是太阳爆发现象引起地球近地空间磁场扰动的重要空间天气过程之一.地球磁场的变化具有多种时间尺度,其中从数十年到数世纪的长时间地磁场变化主要是由地核磁场引起的,而从数秒到数年的短时间地磁变化与太阳活动有关.近年来,越来越多的统计研究表明,地磁活动与太阳活动和地球气候变化之间存在着显著的相关性.地球磁场和地球大气系统的耦合现象驱动着人们探索地磁活动对地球天气和气候系统影响的研究.本文的目的就是综述国内外地磁变化对气候影响的研究进展,介绍我们最新的研究成果,探索地磁活动对气候要素的影响特征和可能机理过程,为深入研究地磁活动对地球天气和气候的影响提供基础和依据,以期对地磁活动和气候要素关系有进一步的认识.     

江苏数字地震台网地震速报软件

介绍江苏数字地震台网地震速报软件功能及在江苏数字地震台网地震速报工作中的应用,该软件实现了实时数据的收集,对地震三要素快速准确地处理,提高了工作效率,在地震监测工作中发挥了重要作用。     

Accuracy of numerical simulations of contaminant transport in heterogeneous aquifers: A comparative study

This work deals with a comparison of different numerical schemes for the simulation of contaminant transport in heterogeneous porous media. The numerical methods under consideration are Galerkin finite element (GFE), finite volume (FV), and mixed hybrid finite element (MHFE). Concerning the GFE we use linear and quadratic finite elements with and without upwind stabilization. Besides the classical MHFE a new and an upwind scheme are tested. We consider higher order finite volume schemes as well as two time discretization methods: backward Euler (BE) and the second order backward differentiation formula BDF (2). It is well known that numerical (or artificial) diffusion may cause large errors. Moreover, when the Péclet number is large, a numerical code without some stabilising techniques produces oscillating solutions. Upwind schemes increase the stability but show more numerical diffusion. In this paper we quantify the numerical diffusion for the different discretization schemes and its dependency on the Péclet number. We consider an academic example and a realistic simulation of solute transport in heterogeneous aquifer. In the latter case, the stochastic estimates used as reference were obtained with global random walk (GRW) simulations, free of numerical diffusion. The results presented can be used by researchers to test their numerical schemes and stabilization techniques for simulation of contaminant transport in groundwater.