Numerical study of sand scour with a modified Eulerian model based on incipient motion theory

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.     

Comparison of two three-dimensional hydrodynamic modeling systems for coastal tidal motion

A comparison of two three-dimensional numerical modeling systems for tidal elevations and velocities in the coastal waters is presented. The two modeling systems are: (1) the Princeton Ocean Model (POM) and (2) the MIKE 3 flow model. The model performance results for Singapore's coastal waters show that the predicted tidal elevations from the two hydrodynamic modeling systems are almost identical and are in very good agreement with field measurement data. The simulated tidal current velocities match well with field measurement data at the selected stations, but it seems that the POM provides the slightly better simulation, compared to the MIKE 3 flow model. The depth profiles of the velocities obtained from the two modeling systems may be greatly different at some time, due to the vertical diffusion coefficient calculated from different turbulent sub-models in the two modeling systems. The POM generally predicts larger peak tidal velocities. The maximum speed differences for the model results from the two modeling systems occur in the top and differ from time to time and from location to location, reaching up to 20%.     

Application of advanced system identification technique to extract roll damping from model tests in order to accurately predict roll motions

In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer.     

A Bingham-plastic model for fluid mud transport under waves and currents

Simplified equations of fluid mud motion, which is described as Bingham-Plastic model under waves and currents, are presented by order analysis. The simplified equations are non-linear ordinary differential equations which are solved by hybrid numerical-analytical technique. As the computational cost is very low, the effects of wave current parameters and fluid mud properties on the transportation velocity of the fluid mud are studied systematically. It is found that the fluid mud can move toward one direction even if the shear stress acting on the fluid mud bed is much smaller than the fluid mud yield stress under the condition of wave and current coexistence. Experiments of the fluid mud motion under current with fluctuation water surface are carried out. The fluid mud transportation velocity predicted by the presented mathematical model can roughly match that measured in experiments.     

垂荡式波浪能装置运动模型数值分析

垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。     

Seismic ground motion relationship in southern China based on stochastic finite-fault model

The characteristics of seismic ground motions in southern China are difficult to determine statistically due to a lack of strong ground motion data. In this study, a stochastic finite-fault ground motion model was adopted to simulate the seismic ground motions at bedrock for southern China, based on parameters derived from small and medium earthquakes that have occurred in the region. From these, the response spectra was estimated. A set of ground motion attenuation relations hipswas then developed based on simulated peak ground motions and response spectral parameters through regression, which would be applicable for use in engineering practice. Through comparisons, it was demonstrated that the proposed ground motion relationships are generally consistent with those obtained from other reported ground motion attenuation models for southern China.     

A study of design spectra based on attenuation relationship of ground motion

In recent years, more and more studies are focused on the performance in seismic design instead of the strength of structures. People have realized that the structure deformation (displacement) can describe the damage more properly and directly than the strength (force). The displacement design spectra need to be constructed within more wide range of the period and the damping for the displacement-based seismic design.     

A note on the useable dynamic range of accelerographs recording translation

Since the late 1970s, the dynamic range and resolution of strong motion digital recorders have leaped from 65 to 135 dB, opening new possibilities for advanced data processing and interpretation. One of these new possibilities is the calculation of permanent displacement of the ground or of structures, associated with faulting or with non-linear response. Proposals on how permanent displacements could be recovered from recorded strong motion have been published since 1976. The analysis in this paper concludes that permanent displacements of the ground and of structures in the near-field can be calculated provided all six components of strong motion (three translations and three rotations) have been recorded, and the records are corrected for transducer rotation, misalignment and cross-axis sensitivity.     

Generalized Lyapunov exponents indicators in Hamiltonian dynamics: An application to a double star system

The Lyapunov characteristic numbers (LCNs) which are defined as the mean value of the distribution of the local variations of the tangent vectors to the flow (=ln _k ⁱ ) (see Froeschlé, 1984) have been found to be sensitive indicators of stochasticity. So we computed the distribution of these local variations and determined the moments of higher order for the integrable and stochastic regions in a binary star system with =0.5.