Oxygen‐18 dynamics in precipitation and streamflow in a semi‐arid agricultural watershed,Eastern Washington,USA

Understanding flow pathways and mechanisms that generate streamflow is important to understanding agrochemical contamination in surface waters in agricultural watersheds. Two environmental tracers, δ¹⁸O and electrical conductivity (EC), were monitored in tile drainage (draining 12 ha) and stream water (draining nested catchments of 6‐5700 ha) from 2000 to 2008 in the semi‐arid agricultural Missouri Flat Creek (MFC) watershed, near Pullman Washington, USA. Tile drainage and streamflow generated in the watershed were found to have baseline δ¹⁸O value of ?14·7‰ (VSMOW) year round. Winter precipitation accounted for 67% of total annual precipitation and was found to dominate streamflow, tile drainage, and groundwater recharge. ‘Old’ and ‘new’ water partitioning in streamflow were not identifiable using δ¹⁸O, but seasonal shifts of nitrate‐corrected EC suggest that deep soil pathways primarily generated summer streamflow (mean EC 250 µS/cm) while shallow soil pathways dominated streamflow generation during winter (EC declining as low as 100 µS/cm). Using summer isotopic and EC excursions from tile drainage in larger catchment (4700‐5700 ha) stream waters, summer in‐stream evaporation fractions were estimated to be from 20% to 40%, with the greatest evaporation occurring from August to October. Seasonal watershed and environmental tracer dynamics in the MFC watershed appeared to be similar to those at larger watershed scales in the Palouse River basin. A 0·9‰ enrichment, in shallow groundwater drained to streams (tile drainage and soil seepage), of δ¹⁸O values from 2000 to 2008 may be evidence of altered precipitation conditions due to the Pacific Decadal Oscillation (PDO) in the Inland Northwest. Copyright © 2009 John Wiley & Sons, Ltd.     

天山南麓雷暴日短期预报研究

利用阿克苏及邻近地区12个气象站1980—2013年雷暴资料,以及同期高空资料,统计了各站年均雷暴日数,对发生区域雷暴天气的环流形势进行分类,归纳出各型的入型指标。通过逐步回归法,建立阿克苏及邻近地区区域雷暴概率回归预报模型,并对2013年进行试预报。结果表明:(1)阿克苏及邻近地区区域雷暴的影响系统主要分为4类:巴湖低槽型、急流型、西北气流型和温度槽型。(2)对2002—2012年5—9月(共1683 d)历史资料进行判别,满足入型条件的样本数为876 d,消空率为48%;对2013年5—9月(共153 d)历史资料进行判别,入型样本数为80 d,消空率为48%。(3)对2002—2012年5—9月所有入型样本进行回代检验,平均准确率为72.0%(平均TS评分为30.1%);对2013年5—9月所有入型样本进行试预报,平均准确率为63.2%(平均TS评分为28.2%)。     

Application of ICTs in Airspace Management and Collaborative Decision-Making—Analyzing the Risk Avoidance in the Condition of Risky Weather as an Example

The application of ICTs makes structural change of the development and effective utilization of airspace. Next generation air transportation system (NextGen) includes new automation concepts with automated information to support the traffic control decision-making. As a result, in the field of academia and industry, air traffic controllers integrate information automatically while making decisions to change the previous manually integrated and decided pattern. The safety ability of airspace is reduced and airspace system is endangered under risky weather conditions of airspace. So there is an urgent demand for new information and communication technologies. The paper is an overview of the information constitution and support of NextGen and provides the study of the development of technique of airspace collaborative decision-makings to confirm the new features based on ICTs. It contains basic application-the input of data and output of the routes of airspace management and collaborative decision-making, and general application-the choose of probability nets of avoiding risky weather, and special application-the affection in the management of the air routes, which are made up of position and direction. The research shows the accurate schedule characteristics of airspace management and collaborative decision-making based on ICTs, which made the space accurate by time accurate. Second, the visualization of airspace management and collaborative decision-making based on ICTs made the maps of flight path under mobile data quickly generated. This could make the fully development and utilization of national airspace, ensure safety, and reduce air traffic controllers’ workload and the costs in delaying and operating in risky weather.     

基于FLUENT的内孤立波质量源造波方法

为研究内孤立波质量源数值造波方法,本文采用两个点源形式的质量源,分别放置于两层流体的上下层中作为内孤立波激发源。推导源项表达式,从不可压缩流体的Navier-Stokes方程出发,结合内孤立波Kd V、e Kd V理论,基于商业软件FLUENT发展了一种内孤立波质量源数值造波方法。通过数值模拟,分析了质量源造波过程中内孤立波的生成过程,并将数值模拟结果同理论及实验作对比。结果表明:基于此方法生成的内孤立波波形、波高及波致水平速度与理论及实验吻合度较好,该方法是可行的,并且耗时短、效率高。     

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.     

Geological control factors of micro oil distribution in tight reservoirs

Understanding the oil distribution characteristics in unconventional tight reservoirs is crucial for hydrocarbon evaluation and oil/gas extraction from such reservoirs. Previous studies on tight oil distribution characteristics are mostly concerned with the basin scale. Based on Lucaogou core samples, geochemical approaches including Soxhlet extraction, total organic carbon (TOC), and Rock-Eval are combined with reservoir physical approaches including mercury injection capillary pressure (MICP) and porosity-permeability analysis, to quantitatively evaluate oil distribution of tight reservoirs on micro scale. The emphasis is to identify the key geological control factors of micro oil distribution in such tight reservoirs. Dolomicrites and non-detrital mudstones have excellent hydrocarbon generation capacity while detritus-containing dolomites, siltstones, and silty mudstones have higher porosity and oil content, and coarser pore throat radius. Oil content is mainly controlled by porosity, pore throat radius, and hydrocarbon generation capacity. Porosity is positively correlated with oil content in almost all samples including various lithologies, indicating that it is a primary constraint for providing storage space. Pore throat radius is also an important factor, as oil migration is inhibited by the capillary pressure which must be overcome. If the reservoir rock with suitable porosity has no hydrocarbon generation capacity, pore throat radius will be decisive. As tight reservoirs are generally characterized by widely distributed nanoscale pore throats and high capillary pressure, hydrocarbon generation capacity plays an important role in reservoir rocks with suitable porosity and fine pore throats. Because such reservoir rocks cannot be charged completely. The positive correlation between hydrocarbon generation capacity and oil content in three types of high porosity lithologies (detritus-containing dolomites, siltstones, and silty mudstones) supports this assertion.     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Occurrence and Chemical Compositions of Amphiboles in Altered Dioritic Rocks of Laiwu Skarn‐Type Iron Deposit in West Shandong Area,China

The Laiwu Fe deposit is the largest skarn‐type deposit in West Shandong in China, with an estimated reserve of 290 Mt of iron ore. Here, we investigate the occurrence and chemical composition of amphiboles in altered dioritic rocks of this deposit. Three generations of amphibole group minerals were identified in these rocks. The first type (Type 1) is a hornblende with a generally euhedral crystal shape, 150–500 μm in size, and dominantly occurs in the host monzonite. The second type (Type 2) of hornblende occurs as fine grains (<100 μm) or concentric rims, less than 50 μm in thickness, around the Type 1 hornblende. The third type (Type 3) of amphibole is anhedral actinolite occurring along the boundary or the cracks of the Type 1 or 2 hornblende grains. The Type 1 hornblende has higher FeO (12.5–15.6 wt.%) and lower MgO contents (11.2–14.6 wt.%) than the Type 2 hornblende, which has an FeO content ranging from 8.8 to 10.5 wt.% and MgO content ranging from 14.2 to 17.1 wt.%. The Type 3 actinolite shows the lowest FeO (4.6–6.4 wt.%) and highest MgO (19.8–21.2 wt.%) contents. We infer that the Type 2 hornblende formed from Fe‐rich hydrothermal fluids released during rapid upwelling of the crystallizing magma. The fluids were relatively reduced and enriched in Fe. The Type 3 actinolite formed by coupled dissolution and reprecipitation, and its formation is one of the features denoting Fe‐enrichment events. Our study of these types of amphibole provides insights into the ore formation process.     

准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。     

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.