传统海图和电子海图一体化数据模型的构建与应用研究

针对国内在一定时期内既要生产传统纸质海图保证传统导航,又要生产电子海图满足电子导航的需求,构建了一个能够包容S-57电子海图和传统海图信息全集的一体化海图数据模型,基于此模型分析了两种数据到一体化数据模型的转换机制,并应用此模型开发原型系统,实现了二者之间的一体化组织和切换显示,为探索传统海图和电子海图的数据融合提供了思路和参考。     

6级左右历史地震震源参数的模拟估计

本文借鉴直接拟合烈度数据点和枚举震源参数的做法,设计了一种利用烈度资料估计6级左右历史地震震源参数的方法.该方法对震源参数所有可能的组合进行枚举,采用地震波场模拟计算转换的理论烈度值,利用模型选择方法评估各可能的震源参数组合模型与历史破坏记录推断的地震烈度数据点的拟合程度,对震源参数做出估计.该方法充分考虑到历史资料相对稀少对震源参数估计的影响,以多种震源参数估计结果和相应权重值来定量化表示估计的不确定性.通过对给定震中位置、震源深度和滑动角的Bootstrap数值恢复检测与2006年美国Parkfield 6.0级地震实例的测试,表明该方法得出的震源参数估计结果具有统计一致性和一定的无偏性.将该方法应用于1882年河北深县6级地震的震源参数估计,结果显示东西向旧城北断层或何庄断层及北东东走向的深西断层为深县地震的发震构造的可能性较大.     

Bidirectional behavior of unreinforced masonry walls

Most of the studies related to the modeling of masonry structures have by far investigated either the in‐plane (IP) or the out‐of‐plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load‐bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement‐controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the results of the tests on walls with different failure modes conducted by the authors. Afterward, the response of the wall systems is evaluated with increasing top displacement having different orientations. A set of 19 monotonic and three cyclic loading analyses are performed, and the results are discussed in terms of the variation of failure modes and load–displacement diagrams. Moreover, the results of wall capacity in each loading condition are compared with those of the ASCE41‐06 formulations. The results indicate that the direction of the resultant force, vectorial summation of IP and OP forces, of the wall is initially proportional to the ratio of stiffness in the IP and the OP directions. However, with the increase of damage, the resultant force direction inclines towards the wall's longitudinal direction regardless of the direction of the imposed displacement. Finally, recommendations are made for applicability of ASCE41‐06 formulations under different bidirectional loading conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

城市钻孔数据地下三维地质建模软件的实现

介绍了基于钻孔数据的城市地下三维地质建模软件的实现过程，提出了基于钻孔数据三维地质建模的总体思路、钻孔数据管理和层序分层方法，还介绍了软件的模块组成及应用实例。建立的软件实现了对城市钻孔数据的三维建模、可视化分析和科学管理，具有丰富的二维成图和三维显示功能，实例的应用也说明本软件是分析城市第四系构造格架和演化的有力工具。     

HUBEX强化观测期雷达测雨在水文过程模拟中的应用(英)

选择全球能量与水循环亚洲季风试验区的淮河黄泥庄水文站控制的史河流域(805 km2)为研究区域,基于数字高程模型,生成栅格水流流向,构建数字流域及空间拓扑关系;然后,将阜阳雷达观测数据经过订正校准后作为研究区内每一栅格单元上的雨量输入,并在每一栅格上应用新安江模型构建产流模型;再根据每一栅格至流域出口断面-黄泥庄水文站的距离,运用Muskingum方法进行汇流演算,从而获得黄泥庄站的流量过程。计算结果显示,从1998年5月31日-8月3日的强化观测期内模型确定性系数为92.41％,其间4场洪水的确定性系数分别为85.64％、86.62％、92.57％和83.91％,高于应用地面雨量计观测的数据计算的结果。这说明雷达测雨数据具有较高的时空分辨率,当它应用于水文过程模拟时优于地面雨量计资料,基于栅格的水文模型为充分利用雷达数据提供了良好平台。     

Investigation of Image Fusion Between High—Resolution Image and Multi—Spectral Image

On the basis of a thorough understanding of the physical characteristics of remote sensing image,this paper employs the theories of wavelet transform and signal sampling to develop a new image fusion algorithm.The algorithm has been successfully applied to the image fusion of SPOT PAN and TM of Guangdong province, China The experimental results show that a perfect image fusion can be built up by using the image analytical solution and reconstruction in the image frequency domain based on the physical characteristics of the image formation.The method has demonstrated that the results of the image fusion do not change spectral characteristics of the original image.     

A patch hierarchy approach to modeling surface and subsurface hydrology in complex flood‐plain environments

Geomorphology interacts with surface‐ and ground‐water hydrology across multiple spatial scales. Nonetheless, hydrologic and hydrogeologic models are most commonly implemented at a single spatial scale. Using an existing hydrogeologic computer model, we implemented a simple hierarchical approach to modeling surface‐ and ground‐water hydrology in a complex geomorphic setting. We parameterized the model to simulate ground‐ and surface‐water ?ow patterns through a hierarchical, three‐dimensional, quantitative representation of an anabranched montane alluvial ?ood plain (the Nyack Flood Plain, Middle Fork Flathead River, Montana, USA). Comparison of model results to ?eld data showed that the model provided reasonable representations of spatial patterns of aquifer recharge and discharge, temporal patterns of ?ood‐water storage on the ?ood plain, and rates of ground‐water movement from the main river channel into a large lateral spring channel on the ?ood plain, and water table elevation in the alluvial aquifer. These results suggest that a hierarchical approach to modeling ground‐ and surface‐water hydrology can reproduce realistic patterns of surface‐ and ground‐water ?ux on alluvial ?ood plains, and therefore should provide an excellent ‘quantitative laboratory’ for studying complex interactions between geomorphology and hydrology at and across multiple spatial scales. Copyright © 2004 John Wiley & Sons, Ltd.     

Research on Initial Modeling Method for TTI Anisotropic Parameters Based on Local Tomography

The initial modeling method based on TTI anisotropy can provide an initial model for the fine modeling of tomographic inversion, and the quality of the initial model directly affects the efficiency and accuracy of tomographic inversion. It is necessary to study the accurate initial modeling method of TTI anisotropy. Based on the conventional flow of the initial modeling method of TTI anisotropic, in this paper the anisotropic parameter extraction formula was perfected, a local tomography method to optimize the flow of the initial modeling method of TTI anisotropy was introduced, and the accuracy of the initial model was further improved, which is more consistent with the actual geological conditions and conducive to the fine modeling of the later tomographic inversion. The processing results of model and filed data show that the initial modeling method of TTI anisotropy based on local tomography is effective and practical.     

当代生态经济的综合研究综述

可持续发展战略的规划设计需要生态经济学的综合研究思想。在总结国内外关于生态经济综合研究资料的基础上,系统总结了一门新兴学科——生态经济学的研究历程、研究内容和方法。生态经济学的综合研究,关键是将人类社会经济系统视为生态系统的一个子系统,认为人类社会的发展依赖于生态系统的支持。其研究是在微观层次上对经济系统和生态系统进行有机结合的具体尝试。从发展与环境之间关系的讨论入手,系统地分析总结了生态经济学与经济学、生态学以及其它学科之间的关系和作用,西方生态经济学早期和当代的研究状况和我国生态经济学的研究状况及进展,最后从可持续发展的定量衡量和生态经济模型的建立两方面介绍了目前流行的生态经济学研究方法。     

适用于声波方程数值模拟的时间-空间域隐式有限差分算子优化方法

声波方程数值模拟已广泛应用于理论地震计算,同时构成了地震逆时偏移成像技术的基础.对于有限差分法而言,在满足一定的稳定性条件时,普遍存在着因网格化而形成的数值频散效应.如何有效地缓解或压制数值频散是有限差分方法研究的关键所在.有限差分格式分为显式有限差分和隐式有限差分.隐式有限差分能够进一步压制数值频散效应.因此本文提出了给定频率范围满足时间-空间域隐式有限差分频散关系的方法,并根据震源频率、波速和网格间距确定波数范围,在此基础上建立方程确定了相应的隐式有限差分系数,使得差分系数能在更大频率范围符合波场传播规律.通过频散分析和正演模拟,验证了本文方法的有效性.