Sediment and particulate phosphorus characteristics in grassed waterways from row crop corn and alfalfa fields collected by manual University of Exeter samplers and automatic sampling

Phosphorus (P) export from agricultural lands above known threshold levels can result in adverse impacts to receiving water quality. Phosphorus loss occurs in dissolved and sediment‐bound, or particulate phosphorous (PP), forms, with the latter often dominating losses from row‐cropped systems. To target practices, land managers need good computer models and model developers need good monitoring data. Sediment monitoring data (e.g. radiometric finger printing and sediment P sorption capacity) can help identify sediment source areas and improve models, but require more sediment mass than is typically obtained by automatic sampling. This study compares a simple suspended sediment sampler developed at the University of Exeter (UE) with automatic sampling in intermittent channels draining corn and alfalfa fields. The corn field had a greater runoff coefficient (27%) than alfalfa (11%). No differences were found in enrichment ratios (sediment constituent/soil constituent) in PP (PP_ER) or percent loss on ignition (LOI_ER) between paired UE samplers on corn. The median LOI_ER for the UE samplers (1·9%) did not differ significantly (p > 0·13) from the automatic sampler (2·0%). The PP_ER from the UE samplers was on average 20% lower than the automatic samplers. A correlation (r² = 0·75) was found between sediment PP and % LOI from automatic samplers and UE samplers for particles < 50 µm, while for > 50 µm PP concentration did not change with changes in % LOI. Sediment ammonium‐oxalate extractable metals were similarly related to LOI, with the strongest correlation for iron (r² = 0·71) and magnesium (r² = 0·70). Copyright © 2011 John Wiley & Sons, Ltd.     

微细浸染型金矿床地质特征及其在河南的找矿方向

本文在对微细浸染型金矿床的地质及地球化学特征和成矿条件进行综合分析的基础上 ,对省内该类型金矿床的特点和成矿地质条件进行了分析和对比 ,指出了省内寻找该类型金矿床的找矿方向。     

埃尔米特插值函数在公路平面线形设计中的应用

三次样条函数在公路平面线形设计中有广泛的应用,但由于没有统一的函数表达式且计算量大,因而在应用上不便。埃尔米特插值函数的特点决定其能很好地逼近被插值函数,且计算过程简便。公路平面线形实例设计表明,三次埃尔米特插值函数用于公路平面线形设计中,能够满足路线设计规范(JTJ011-94)的要求,其设计结果与三次样条函数设计结果接近。本研究建立了公路平面线形设计的埃尔米特插值函数方法,可供公路平面线形设计工作参考。     

北京同步辐射装置准直测量控制网的设计与优化

在北京同步辐射装置升级改造中,为提高元件的安装精度,同时兼顾未来新增光束线的建设需要,在实验大厅建立了准直测量控制网,作为设备定位、调校、安装和变形监测等工作的基础。本文重点介绍该控制网的设计、优化与观测结果分析,特别阐述了激光精密测量技术的应用,以及对点位密度、测量精度及可靠性的控制。     

基于无人机航测的天景山断裂孟家湾地貌精细解译及活动构造定量参数提取

利用无人机摄影测量技术航测天景山断裂孟家湾的地表地形地貌数据,以获取的数字高程模型为基础,通过构造地貌精细解译进一步提取地震断层的水平位移量及垂直位错量,计算断层的平均水平滑动速率,并分析判识了古地震事件。结果表明:①研究区发育3期河流阶地T₃、T₂、T₁,且均被断错,最新的冲沟T₀未见错动;②在T₁阶地面上提取水平位移量为(7.77±0.98)m,计算得到全新世中期以来的平均水平滑动速率为0.86~0.91 mm/a;③在T₁阶地面上跨陡坎提取垂直位错量为(0.61±0.11)m,其坡度存在2个明显拐点,代表2次地表破裂型地震事件,推测在12000 a前,即晚更新世末期或全新世初期以来至少发生过2次地表破裂型地震。     

粉细砂地层防渗帷幕综合施工方法

四川省武都水库右岸EL574 m灌浆平洞揭露出厚度2.3～9.8 m的粉细砂层,普通水泥高压灌浆无法形成可靠的防渗帷幕。采用高压旋喷、湿磨细水泥、化学灌浆的组合处理方式,取得了较好的施工效果。通过钻孔压水、大功率声波CT、单孔声波、钻孔全景数字成像等方法检测,表明达到了设计防渗要求。     

一种面向异常检测的高光谱图像降维算法

针对高光谱数据预处理中传统降维算法的不足,文章提出采用线性局部切空间排列(LLTSA)算法进行降维,并在低维空间中,以数据点到背景流形的最小距离为度量进行异常目标检测。面向异常目标检测问题的降维算法,需要考虑计算量和异常污染两个问题:为减少计算量,选择图像中一部分具有代表性的训练数据进行LLTSA降维并求取用于泛化的投影矩阵;为避免异常信息对背景特性的影响,应该选择不含异常的背景训练数据建立背景流形。背景训练点的选择基于递归多层分割算法,结合分割块的大小和分割块被近邻点重构的误差,去除分割结果中可能包含异常的区域并尽可能多地保留背景信息。实验结果表明LLTSA可以利用少数特征有效区分背景和异常,基于LLTSA的检测算法比经典RX和核RX算法具有更好的异常检测性能。     

基于三维激光扫描数据的地铁隧道断面测量

地铁主体施工完毕后为了对线路进行调线调坡,需要对地铁隧道进行断面测量,三维激光扫描与常规测量方法相比具有非接触式测量,可高密度采集空间三维点云数据等特点,为地铁断面测量提供了新的途径。本文基于Leica Scanstation 2扫描仪分析了三维激光扫描点云数据采集步骤和数据处理流程,阐述了基于点云数据的地铁断面测量方法,分析了三维激光扫描技术在隧道断面测量中应用的可行性。研究结果表明,这种高密度、高精度的隧道断面能够满足地铁调线调坡等方面的技术要求。     

浅论高精度DEM的制作

结合地理国情普查DEM精细化生产项目,论述了基于ArcGIS 10.1、ERDAS 2011软件,批量生产高精度DEM的工艺流程及作业过程中关键性技术问题的解决.     

Experimental study of the effects of non-uniformly distributed fine soil on mechanical properties of Shenyang–Dandong Railway coarse-grained soil

The stress produced by repeated train loads decreases with increasing railway subgrade bed depth, and slightly weathered coarse particles of subgrade bed fillings can be broken at different levels under continuous load. Thus, the mass of fine soil, with a diameter of not more than 0.075 mm, is different at different depths. Fine soil is also sensitive to frost heave and thaw settlement. In order to study the effects of non-uniformly distributed fine soil on the mechanical properties of coarse-grained soil of the Shenyang-Dandong Railway, triaxial tests were conducted with three types of specimens, undergoing six freeze-thaw cycle numbers(0, 1, 3, 7, 9, 12) and three confining pressures(100, 200, 300 k Pa). The freezing temperature is-5 °C and the thawing temperature is +15 °C. The stress-strain behavior, static strength, resilient modulus, cohesive force and the angle of internal friction were measured for different tested specimens. As a result, the law of static strength and resilient modulus of different specimens following the increase of freeze-thaw cycles under three confining pressures is obtained. The changing law of cohesive force and friction angle of three specimens following the increase of freeze-thaw cycles is also calculated, and the different results of different specimens are also compared.