Mineralogy, geochemistry, and Nd isotope composition of the Rainbow hydrothermal field, Mid-Atlantic Ridge

Petrological, geochemical, and Nd isotopic analyses have been carried out on rock samples from the Rainbow vent field to assess the evolution of the hydrothermal system. The Rainbow vent field is an ultramafic-hosted hydrothermal system located on the Mid-Atlantic Ridge characterized by vigorous high-temperature venting (∼365°C) and unique chemical composition of fluids: high chlorinity, low pH and very high Fe, and rare earth element (REE) contents (Douville et al., Chemical Geology 184:37–48, 2002). Serpentinization has occurred under a low-temperature (<270°C) retrograde regime, later overprinted by a higher temperature sulfide mineralization event. Retrograde serpentinization reactions alone cannot reproduce the reported heat and specific chemical features of Rainbow hydrothermal fluids. The following units were identified within the deposit: (1) nonmineralized serpentinite, (2) mineralized serpentinite—stockwork, (3) steatite, (4) semimassive sulfides, and (5) massive sulfides, which include Cu-rich massive sulfides (up to 28wt% Cu) and Zn-rich massive sulfide chimneys (up to 5wt% Zn). Sulfide mineralization has produced significant changes in the sulfide-bearing rocks including enrichment in transition metals (Cu, Zn, Fe, and Co) and light REE, increase in the Co/Ni ratios comparable to those of mafic Cu-rich volcanic-hosted massive sulfide deposits and different ¹⁴³Nd/¹⁴⁴Nd isotope ratios. Vent fluid chemistry data are indicative of acidic, reducing, and high temperature conditions at the subseafloor reaction zone where fluids undergo phase separation most likely under subcritical conditions (boiling). An explanation for the high chlorinity is not straightforward unless mixing with high salinity brine or direct contribution from a magmatic Cl-rich aqueous fluid is considered. This study adds new data, which, combined with the current knowledge of the Rainbow vent field, brings compelling evidence for the presence, at depth, of a magmatic body, most likely gabbroic, which provides heat and metals to the system. Co/Ni ratios proved to be good tools used to discriminate between rock units, degree of sulfide mineralization, and positioning within the hydrothermal system. Deeper units have Co/Ni <1 and subsurface and surface units have Co/Ni >1.     

大气CO2浓度升高对土壤中不同粒级碳的影响

不同粒级土壤中的碳有着不同的周转规律，在高CO2浓度条件下，它们含量的变化将在一定程度上反映土壤碳是累积还是减少，对明确土壤碳的变化趋势有重要意义．采用田间培养试验初步模拟研究在高CO2浓度条件下土壤不同粒级碳的分布．结果表明，加入秸秆培养1年，由于CO2浓度升高的原因导致在低氮（LN）、常规氮（NN）和高氮（HN）水平下土壤中碳分别增加0．01、1．10、1．22g／kg，表现为粒级〈53μm土壤颗粒中碳分别增加1．53、2．19、2．70g／kg．粒级〈53μmm土壤颗粒碳量的增加，主要是由于其重量分配百分数显著增加36．2％，碳浓度增加5．4％；粒级〉250μm和250～53μm土壤颗粒部分虽然其碳浓度分别增加20．8％和17．3％（P〈0．05），怛由于重量分配百分数分别显著降低22．8％和36．1％，结果碳量降低．试验表明高CO2浓度导致不同粒级土壤的分配及碳浓度的变化；高氮施肥水平下有增加土壤碳量特别是小粒级土壤碳量的趋势．     

大湾铀矿田铀-镭平衡系数及迁移富集特征研究

从分析大湾铀矿田各矿床(点)的铀镭平衡系数变化特征出发,结合放射性同位素比值特征分析铀镭迁移富集行为,指出了各矿床(点)氧化带的深度,以了解各铀矿床(点)潜在的工业价值.     

USB总线与CAN总线协议转换器设计

现场总线(F ield bus)是将自动控制系统中底层的现场控制器和现场智能仪表设备互连的实时控制通讯网络,是5C(Computer,Control,Commun ication,CRT,Change)技术相结合的产物。CAN(Control Area Network)总线是现场总线的一种,广泛应用于汽车行业、机械工业、家用电器、传感器等领域,已经形成国际标准,是被公认的几种最有前途的现场总线之一。提出了一种通过计算机USB接口实现现场总线CAN与计算机(服务器)之间通信的方案。具体介绍了使用USB总线接口芯片CH372和独立的CAN控制器SJA1000实现的硬件电路设计方法、本地端软件的编写方法,给出了主要程序模块的流程。     

青藏高原中部的东西向扩张构造运动

系统分析了1933~2003年间青藏高原及其周缘发生的745个中、强地震的震源机制解,研究了高原地壳构造运动及其动力学特征。结果表明,大量正断层型地震集中发生在青藏高原中部海拔4000m以上的地区,其中许多地震是纯正断层型地震。震源机制结果显示,该区正断层型地震的断层走向多为南北方向,断层位错矢量的水平分量均位于近东西方向,这表明青藏高原高海拔地区存在着近东西方向的扩张构造运动。地震震源应力场的研究结果表明,在高原中部高海拔地区,E-W向或WNW-ESE向的水平扩张作用控制着该区的地壳应力场。青藏高原高海拔地区近东西方向的扩张构造运动是该区引张应力场的作用结果,其动力学原因可能与持续隆升的高原自重增大引起的重力崩塌及其周边区域构造应力状况有关。而青藏高原周缘地区,除了东部边缘外,南部的喜马拉雅山前沿以及青藏高原的北部、西部边缘所发生的绝大部分地震都是逆断层型或走滑逆断层型地震。在青藏高原周缘地区,北东或者北北东方向水平挤压的构造应力场为优势应力场。在中国西部的大范围内,主压应力P轴水平分量位于NE-SW方向,形成了一个广域的NE-SW方向的挤压应力场。青藏高原及其周缘应力场特征表明,印度板块的北上运动以及它与欧亚板块之间的碰撞所形成的挤压应力场是高原强烈隆起的直接原因。在青藏高原中南部形成了近东西向引张应力场为主的区域,并以东西向扩张构造运动部分释放其应力积累。研究高原高海拔地区的引张应力场和近东西向扩张构造运动的特征,对于认识青藏高原强烈隆起的地球动力学过程与机制,有着重要的理论意义。     

邯峰矿区古构造应力场与构造演化

采用共轭剪节理应力反演方法,恢复了邯郸-峰峰矿区晚古生代以来的3期古构造应力场,进而探讨了煤田构造的演化历史,将其分为4大阶段：①中生代早期近NS向挤压,煤系后期改造初动期;②中生代晚期SE-NW向挤压,奠定煤田构造格架的基础;③中生代末至古近纪NW-SE向拉张,煤田构造格架定型;④新近纪以来近东西向拉张,煤田构造的现代活动.     

Outlier detection algorithms and their performance in GOCE gravity field processing

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.     

A parametric study on the impact of satellite attitude errors on GOCE gravity field recovery

In the recent design of the Gravity field and steady-state Ocean Circulation Explorer (GOCE) satellite mission, the gravity gradients are defined in the gradiometer reference frame (GRF), which deviates from the actual flight direction (local orbit reference frame, LORF) by up to 3–4°. The main objective of this paper is to investigate the effect of uncertainties in the knowledge of the gradiometer orientation due to attitude reconstitution errors on the gravity field solution. In the framework of several numerical simulations, which are based on a realistic mission configuration, different scenarios are investigated, to provide the accuracy requirements of the orientation information. It turns out that orientation errors have to be seriously considered, because they may represent a significant error component of the gravity field solution. While in a realistic mission scenario (colored gradiometer noise) the gravity field solutions are quite insensitive to small orientation biases, random noise applied to the attitude information can have a considerable impact on the accuracy of the resolved gravity field models.     

GGM02 – An improved Earth gravity field model from GRACE

A new generation of Earth gravity field models called GGM02 are derived using approximately 14 months of data spanning from April 2002 to December 2003 from the Gravity Recovery And Climate Experiment (GRACE). Relative to the preceding generation, GGM01, there have been improvements to the data products, the gravity estimation methods and the background models. Based on the calibrated covariances, GGM02 (both the GRACE-only model GGM02S and the combination model GGM02C) represents an improvement greater than a factor of two over the previous GGM01 models. Error estimates indicate a cumulative error less than 1 cm geoid height to spherical harmonic degree 70, which can be said to have met the GRACE minimum mission goals. Electronic Supplementary Material Supplementary material is available in the online version of this article at     

Global height datum unification: a new approach in gravity potential space

The problem of “global height datum unification” is solved in the gravity potential space based on: (1) high-resolution local gravity field modeling, (2) geocentric coordinates of the reference benchmark, and (3) a known value of the geoid’s potential. The high-resolution local gravity field model is derived based on a solution of the fixed-free two-boundary-value problem of the Earth’s gravity field using (a) potential difference values (from precise leveling), (b) modulus of the gravity vector (from gravimetry), (c) astronomical longitude and latitude (from geodetic astronomy and/or combination of (GNSS) Global Navigation Satellite System observations with total station measurements), (d) and satellite altimetry. Knowing the height of the reference benchmark in the national height system and its geocentric GNSS coordinates, and using the derived high-resolution local gravity field model, the gravity potential value of the zero point of the height system is computed. The difference between the derived gravity potential value of the zero point of the height system and the geoid’s potential value is computed. This potential difference gives the offset of the zero point of the height system from geoid in the “potential space”, which is transferred into “geometry space” using the transformation formula derived in this paper. The method was applied to the computation of the offset of the zero point of the Iranian height datum from the geoid’s potential value W ₀=62636855.8 m²/s². According to the geometry space computations, the height datum of Iran is 0.09 m below the geoid.