Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic response of a cable‐stayed bridge deck under multi‐component non‐stationary random ground motion

A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd.     

Frequency domain modal analysis of earthquake input energy to highly damped passive control structures

A new complex modal analysis‐based method is developed in the frequency domain for efficient computation of the earthquake input energy to a highly damped linear elastic passive control structure. The input energy to the structure during an earthquake is an important measure of seismic demand. Because of generality and applicability to non‐linear structures, the earthquake input energy has usually been computed in the time domain. It is shown here that the formulation of the earthquake input energy in the frequency domain is essential for deriving a bound on the earthquake input energy for a class of ground motions and for understanding the robustness of passively controlled structures to disturbances with various frequency contents. From the viewpoint of computational efficiency, a modal analysis‐based method is developed. The importance of overdamped modes in the energy computation of specific non‐proportionally damped models is demonstrated by comparing the energy transfer functions and the displacement transfer functions. Through numerical examinations for four recorded ground motions, it is shown that the modal analysis‐based method in the frequency domain is very efficient in the computation of the earthquake input energy. Copyright © 2004 John Wiley & Sons, Ltd.     

A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings

An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429. Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at each floor level. These ‘modal’ demands due to the first few terms of the modal expansion are then combined by the CQC rule to obtain an estimate of the total seismic demand for inelastic systems. When applied to elastic systems, the MPA procedure is equivalent to standard response spectrum analysis (RSA). The MPA estimates of seismic demand for torsionally‐stiff and torsionally‐flexible unsymmetric systems are shown to be similarly accurate as they are for the symmetric building; however, the results deteriorate for a torsionally‐similarly‐stiff unsymmetric‐plan system and the ground motion considered because (a) elastic modes are strongly coupled, and (b) roof displacement is underestimated by the CQC modal combination rule (which would also limit accuracy of RSA for linearly elastic systems). Copyright © 2004 John Wiley & Sons, Ltd.     

Approximate modal decomposition of inelastic dynamic responses of wall buildings

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1: dynamic analysis approach

In this study the inelastic behavior of steel arch bridges subjected to strong ground motions from major earthquakes is investigated by dynamic analyses of a typical steel arch bridge using a three‐dimensional (3D) analytical model, since checking seismic performance against severe earthquakes is not usually performed when designing such kinds of bridge. The bridge considered is an upper‐deck steel arch bridge having a reinforced concrete (RC) deck, steel I‐section girders and steel arch ribs. The input ground motions are accelerograms which are modified ground motions based on the records from the 1995 Hyogoken‐Nanbu earthquake. Both the longitudinal and transverse dynamic characteristics of the bridge are studied by investigation of time‐history responses of the main parameters. It is found that seismic responses are small when subjected to the longitudinal excitation, but significantly large under the transverse ground motion due to plasticization formed in some segments such as arch rib ends and side pier bases where axial force levels are very high. Finally, a seismic performance evaluation method based on the response strain index is proposed for such steel bridge structures. Copyright © 2004 John Wiley & Sons, Ltd.     

Seepage driving effect on deformations of San Fernando dams

In the process of flow deformation of an earth dam, the seepage force inside the dam plays a role as a driving force. The seepage force acts just like the gravitational force in terms of pushing soils away from their original locations after liquefaction is triggered. This paper draws attention to this seepage driving effect by presenting a set of fully coupled finite element analyses on the well-known San Fernando dams, with the objective of evaluating the impact of this seepage effect. The results indicate that while this effect is always there, its practical significance depends on a number of factors. In the case of the upper San Fernando dam, which experienced a significant, but restricted, downstream movement during the 1971 earthquake, the seepage driving effect was indeed significant. On the contrary, for the lower dam, which failed and slid into the upstream reservoir during the same earthquake, this seepage effect was relatively less pronounced. The detailed results of the analyses reveal the likely mechanisms of failure and deformation of the two dams and the likely cause behind the difference between their responses during the earthquake.     

兰州CAWS600-R自动站与人工观测资料对比分析

利用2002年11月到2003年2月兰州CAWS600-R型自动站与人工观测的温度、本站气压、水汽压、相对湿度、5～320cm地温等资料，分析了对比观测资料的差值。结果表明：对气温、本站气压、水汽压、相对湿度及320cm地温等要素观测误差较小，5～160cm地温的观测误差较大。自动观测仪器的系统性偏差、测量元件的精度及对气象要素变化响应的灵敏度、观测时间的差异和人为因素的影响是造成对比观测误差的原因。     

雾探测器现场对比试验方法研究

简单介绍了WT-1型雾探测器的结构和现场试验情况，对试验期间(2001年12月1日至2002年5月31日)所获取的数据进行了统计分析，计算了试验期间雾探测器数据的缺测率、与人工观测数据及芬兰同类产品的测量结果之间的相关系数，三者之间的相符率，以及数据随时间的变化趋势。以数据处理结果为依据，客观地阐述了雾探测器的优缺点，以及与目前世界上普遍认可的芬兰能见度仪之间的差距，同时也提出了雾探测器改进的一些建议。     

傅立叶相位分析导风技术的适用范围和相位重叠分析

本文利用傅立叶相位分析法对示踪云进行频域波谱分析，通过谐波的相位变化计算波速，从而导出云迹风(Cloud Motion Wind—CMW)。本文研究表明，对于给定的导风云图序列，如果示踪云在给定时间间隔内的位移小于两个像距，适用傅立叶相位分析法计算云迹风；否则，在用傅立叶相位分析法计算波速时由于高次谐波出现相位重叠，从而使计算的波速小于实际风速，此时适用最大相关系数法。