西部测图移动应急安全自救保障系统研究

移动应急安全自救保障系统是整个"西部测图工程"安全保障体系建设中的最重要组成部分。本文从"西部测图"移动应急安全自救保障建设实际需求出发,结合当前PDA硬件资源的特点,在分析测区作业特点的基础上探讨了系统建设的整体架构以及系统建设的需求特征,并详细阐述了系统的数据组织结构模型,最后给出了系统的相关功能实现和应用。     

初值及物理过程对\

利用国防科技大学全球中期数值天气预报模式（YinHe Global Spetral model,YHGS）产品驱动WRF对2018年7月4日华中地区暴雨过程进行模拟,并与ERA-interim资料作初始场模拟结果对比,评估YHGS模式产品在此次暴雨过程预报中的应用能力。结果表明：（1）WRF-YHGS对2018年7月4日华中地区暴雨过程有一定的预报能力,其模拟的大尺度环流形势、水汽收支量变化趋势与WRF-ERA有着很好的一致性,YHGS模式产品驱动中尺度数值预报是可行的。（2）WRF-YHGS模拟效果较WRF-ERA差,但大雨量级WRF-ERA湿偏差较大,两组试验各物理量模拟结果存在一定差距,且随着积分时间的增加差异逐渐增大。（3）WRF-YHGS、WRF-ERA模拟结果的差异主要来自YHGS与ERA初始场中差异较大的次天气尺度运动和YHGS全球模式预报场误差两个方面。

     

简单热带海气耦合模型中不同扰动形式的作用

在局地热平衡情况下,将物理量先用韦伯函数展开,然后去掉相应分量的滤波方 法,讨论了简单热带海气耦合模型中不同形式扰动的作用和贡献,结果表明,在热带海气耦合 系统中,大气准定常 Ｒｏｓｓｂｙ波和海洋 Ｒｏｓｓｂｙ波对于耦合系统贡献较大,它们决定着耦合系统 与耦合扰动的性质,而大气准定常Ｋｅｌｖｉｎ波和海洋Ｋｅｌｖｉｎ波对于耦合系统贡献相对较小．     

Deposition of trace substances via cloud interception on a coniferous forest at Kleiner Feldberg

A resistance model to calculate the deposition of cloud droplets on a coniferous forest and some improved parameterizations of the indispensable input parameters are described. The deposition model is adapted to the coniferous forest at the Kleiner Feldberg site and verified by the data of a drip water monitoring station below the forest canopy. The measurements of liqud water content, wind speed and trace substance compounds in cloud water of the Ground-based Cloud Experiment (GCE) at Kleiner Feldberg in 1990 are used to calculate the cloud water deposition fluxes and the deposition of trace substances via cloud water interception. The calculated deposition of trace substances via cloud water interceptions is three to six times higher than via rain during the experiment. On a long term data basis the yearly amount of cloud water deposition is 180 mm year^–1 at Kleiner Feldberg site (840 m a.s.l.) while the precipitation amount is 1030 mm year^–1. Due to higher trace substance concentrations in cloud water compared to rain the ionic deposition via cloud water interception and via precipitation were assessed to be of comparable magnitude.     

Elasticity soltion of rupture model of shallow earthquake

Based on the theory of elastic mechanics, and using the typical rupture model of shallow earthquake, the authors considered the shallow earthquake as a plane mechanical problem, which was constructed the corresponding mechanical model. By the stress components' formulas of the semi-infinite model acted by the finite even shearing force, the main stress is deduced. It is clear that the sector on the right of the center section is squeezed zone, where the maximum principal stress points at the "source of stress", and that on the left is tensile zone, where the minimum principal stress points to the "source of stress".     

Scaling of response spectrum and duration for aftershocks

Aftershocks have the potential to cause collapse of a structure that has been already damaged by the preceding main shock. Seismic safety of a structure should therefore be ascertained through a damage analysis using the anticipated main shock and few larger-aftershock motions. Simulation of aftershock motions needs characterization of the seismic hazard due to aftershocks, and therefore it will be useful to develop a conditional scaling model that can predict the response spectrum of an anticipated aftershock motion consistent with the design spectrum of the main shock motion anticipated at the same station. In this study an attempt is made to develop a conditional scaling model for the pseudo spectral velocity spectrum via linear regression analysis on the aftershock and main shock recordings for the 1999 Chi–Chi earthquake. It is shown that it may be possible to obtain a simpler and approximate version of the conditional model from an unconditional model. Damage-causing potential of a ground motion also depends on its strong motion duration (SMD) and therefore a conditional scaling model is developed for SMD of the aftershock motion in several narrow frequency-bands. The model is developed for the larger-aftershock motions and it is shown that a reasonable replacement of such a model may be obtainable directly from an unconditional model. Finally, a simple weighted averaging scheme is proposed to obtain the composite SMD from the SMDs for different frequency bands by using the pseudo spectral acceleration spectrum of the motion.     

A hybrid discrete–finite element model for numerical simulation of geomaterials

A hybrid discrete–finite element model is introduced for simulation of mechanical behavior of geomaterials. The soil or rock is modeled as a system of discrete balls that interact through normal and shear springs. The balls can be bonded at the contact points to withstand the applied deviatoric stresses. The important feature of this model is that the confining walls that can be imagined for example as the surrounding membrane or the mold in a physical test are modeled by deformable finite elements. This allows simulation of laboratory test features more realistically compared to the situations where the surrounding walls are rigid. The relationships between micro- and macro-properties are investigated in this paper as well. These relationships and the corresponding curves are helpful tools in calibration of the numerical model for the macroscopic elastic properties.     

Crustal Growth by Magmatic Accretion Constrained by Metamorphic P-T Paths and Thermal Models of the Kohistan Arc, NW Himalayas

Magmatic accretion is potentially an important mechanism inthe growth of the continental crust and the formation of granulites.In this study, the thermal evolution of a magmatic arc in responseto magmatic accretion is modeled using numerical solutions ofthe one-dimensional heat conduction equation. The initial andboundary conditions used in the model are constrained by geologicalobservations made in the Kohistan area, NW Himalayas. Takingconsideration of the preferred intrusion locations for basalticmagmas, we consider two plausible modes of magmatic accretion:the first involves the repeated intrusion of basalt at mid-crustaldepths (‘intraplate model’), and the second evaluatesthe simultaneous intrusion of basalt and picrite at mid-crustaldepths and the base of the crust respectively (‘double-platemodel’). The results of the double-plate model accountfor both the inferred metamorphic P–T paths of the Kohistanmafic granulites and the continental geotherm determined frompeak P–T conditions observed for granulite terranes. Thedouble-plate model may be applicable as a key growth processfor the production of thick mafic lower crust in magmatic arcs. KEY WORDS: thermal model; magmatic underplating; P–T path; granulite; lower crust     

基于地质记录用时域组合模型预测气候变化趋势的初步研究

用时域分析组合模型建立了１００万年来６０°Ｎ６月份太阳辐射量时间序列、宝鸡黄土粒度时间序列、渭南夏季风指数时间序列的动态模型．研究结果表明,时域分析组合模型较好地提取了时间序列的信息,得到的几个显著周期Ｔ＝１３３,１００,８９,４１,２３,１９ｋａ,与地球轨道三要素的变化周期接近．用组合模型拟合实测数据,精度是高的;用其预测未来气候替代性指标时间序列的变化情况,发现未来气候有向干冷方向发展的趋势．时域分析组合模型为研究气候变化趋势提供了一种定量分析、预测的方法．     

基于准三维有限元方法建立的地震活动模型

基于有限元方法,参照细胞自动机模型,建立了一个地震活动演化的动力学模型.在这个模型中,根据边界条件和单元介质参数的分布,利用有限元方法确定各单元的应力增长速率.每个单元设定初始应力和摩擦因数,利用破裂准则可得到单元破裂所需时间.当单元破裂后,将破裂单元作为内部边界,利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整.根据上述规则,建立一个由30×40个节点组成,在定常位移速率边界条件作用下的地震活动模型,探讨了区域应力场的动态演化、地震活动图像和各种参数变化对地震活动的影响.结果表明该模型在研究地震活动方面有一定优势并具有实用价值.