煤炭资源勘查误差理论研究

对煤炭资源勘查资源量与客观物质量之间差值的误差理论探讨,提出误差由真值误差、系统误差和离差3个基本部分组成,其中真值误差是不可消除的观测误差、系统误差是控制网度所决定的准确度标准、而离差是由地质构造及矿床形态的多解性产生的资源量波动。在此基础上,构筑了一个关于误差的数学模型,最后应用误差理论对现行勘查工作中常见的错误进行分析,并就如何避免错误及减少误差提出了见解。     

对提高导航型GPS定位精度之工作方法的探讨

论文主要介绍了导航型GPS坐标转换参数的计算方法和测量误差的改正方法。该方法的要点是通过实测多个公共点来计算坐标转换参数,以此获得较好的转换精度;并进一步对观测结果加以误差改正,从而提高其定位精度。     

基于BP神经网络的地图数字化误差纠正

由于在数字化采集过程中不可避免地会引入系统误差和异常误差,因此消除和削弱这些误差的影响是提高空间数据质量的关键。然而由于图纸变形不均匀,扫描误差又极其复杂,用常规的多项式拟合技术只能消除部分有规律的系统误差,很难完全消除它们对地图数字化坐标的影响。BP神经网络是一个高度非线性映射系统,能以任意精度逼近。结合地图数字化坐标改正的特点,本文给出了基于BP神经网络地图数字化坐标误差纠正的方法,并通过实例验证了该方法的有效性。     

基于小波变换与滤波的DEM简化方法

针对现有3维地形模型简化方法中的不足,提出了一种基于小波变换与滤波的规则格网简化方法。同时还在大量实验的基础上,给出了一般情况下需要的变换层数,分析了滤波门限与简化效果之间的关系。这里的研究不仅为3维地形的多分辨率合理建模与精度评估提供了理论和方法,而且也为今后开展类似研究及进行建模质量控制提供了科学的依据。     

地图误差对地图匹配质量的影响

高精度的数字地图是正确匹配车辆位置的基础。详细分析了地图数据的地理误差和拓扑误差的误差形式,路网数据模型的常见误差因素和改进策略,最后介绍了不同地图匹配算法对地图质量的敏感性和可行性。根据可能出现的误差对现有数字地图和匹配算法加以改进,弥补了原有数字地图带来的不精确缺陷。跑车实验证明,考虑了数字地图误差影响的匹配算法可以明显提高定位精度,减小车辆定位误差。     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

A data-driven approach to local gravity field modelling using spherical radial basis functions

We propose a methodology for local gravity field modelling from gravity data using spherical radial basis functions. The methodology comprises two steps: in step 1, gravity data (gravity anomalies and/or gravity disturbances) are used to estimate the disturbing potential using least-squares techniques. The latter is represented as a linear combination of spherical radial basis functions (SRBFs). A data-adaptive strategy is used to select the optimal number, location, and depths of the SRBFs using generalized cross validation. Variance component estimation is used to determine the optimal regularization parameter and to properly weight the different data sets. In the second step, the gravimetric height anomalies are combined with observed differences between global positioning system (GPS) ellipsoidal heights and normal heights. The data combination is written as the solution of a Cauchy boundary-value problem for the Laplace equation. This allows removal of the non-uniqueness of the problem of local gravity field modelling from terrestrial gravity data. At the same time, existing systematic distortions in the gravimetric and geometric height anomalies are also absorbed into the combination. The approach is used to compute a height reference surface for the Netherlands. The solution is compared with NLGEO2004, the official Dutch height reference surface, which has been computed using the same data but a Stokes-based approach with kernel modification and a geometric six-parameter “corrector surface” to fit the gravimetric solution to the GPS-levelling points. A direct comparison of both height reference surfaces shows an RMS difference of 0.6 cm; the maximum difference is 2.1 cm. A test at independent GPS-levelling control points, confirms that our solution is in no way inferior to NLGEO2004.     

Modelling Positional Uncertainty of Line Features by Accounting for Stochastic Deviations from Straight Line Segments

The assessment of positional uncertainty in line and area features is often based on uncertainty in the coordinates of their elementary vertices which are assumed to be connected by straight lines. Such an approach disregards uncertainty caused by sampling and approximation of a curvilinear feature by a sequence of straight line segments. In this article, a method is proposed that also allows for the latter type of uncertainty by modelling random rectangular deviations from the conventional straight line segments. Using the model on a dense network of sub‐vertices, the contribution of uncertainty due to approximation is emphasised; the sampling effect can be assessed by applying it on a small set of randomly inserted sub‐vertices. A case study demonstrates a feasible way of parameterisation based on assumptions of joint normal distributions for positional errors of the vertices and the rectangular deviations and a uniform distribution of missed sub‐vertices along line segments. Depending on the magnitudes of the different sources of uncertainty, not accounting for potential deviations from straight line segments may drastically underestimate the positional uncertainty of line features.     

GPS伪卫星的组合定位技术及其误差分析

介绍了GPS伪卫星组合定位的观测模型,详细论述了GPS伪卫星组合定位中存在的误差源,并对各误差源的消除方法进行了分析。