数据挖掘在高校学生管理决策中的应用模式分析

随着因特网的广泛应用,各高校在开展现代远程教育过程中记录了大量复杂的学生信息,基于这些历程信息,在高校学生管理决策中利用数据挖掘技术,提出了现代高校学生管理工作的新模式,并就几个管理决策的应用模式进行了实例分析.     

短时傅里叶变换在GPR数据解释中的应用

小波变换、经验模态分解、奇异值分解是提高探地雷达数据信噪比、突出深部异常的有效手段.笔者提出一种快速的短时傅里叶变换技术,对探地雷达噪声信号进行解译,利用雷达发射信号与噪声信号的频谱差异提高雷达数据的信噪比;并以数值算例进行验证,分别从单道波信号的频率能量差异,主频等值分布差异等方面详细分析了该方法与小波变换、经验模态分解方法的优势.结果表明,短时傅里叶分析技术能实现探地雷达数据的快速解译,为探地雷数据的反演成像提供更精确的约束条件.     

车辆荷载作用下公路挡土墙稳定性及力学响应研究

为研究车辆荷载对公路挡土墙稳定性的影响,针对规范中未考虑墙后土体破裂角变化的问题,引入改进等效土层厚度法,以库仑土压力理论为基础,循环迭代计算破裂角收敛值得到新的换算土层厚度。以安康市某公路边坡路堤挡土墙实例,分别采用规范方法和改进方法分析挡土墙稳定性,结果表明：改进方法的稳定性评价结果更精确。采用数值方法分析车辆荷载作用下挡土墙的力学响应,结果表明：车辆荷载作用下挡土墙受影响部位主要为中上部。车墙距离越小,墙后土体振动响应越显著,附加动土压力越大,而挡土墙水平位移受其影响不大。     

大型高精度GNSS基线向量网并行抗差估计

针对大型GNSS基线向量网的特点,在改进的相关观测抗差估计RECO方案的基础上采用并行计算技术进行相关抗差估计的并行计算(简称"并行抗差估计"),并给出了可行的解算步骤。通过算例分析,验证了大型GNSS基线向量网的并行相关抗差估计,不仅有效抑制了观测异常对参数估值的影响,而且显著提高了计算效率。     

全谱直读发射光谱仪分析中铜对铅谱线干扰机理的探讨

在使用全谱直读等离子体发射光谱仪分析铅时,发现Cu221.810线对Pb220.3线形成干扰。产生这种干扰的原因是由于全谱直读等离子体发射光谱仪采用了固态阵列检测器和中阶梯光栅,从而在两条谱带之间发生了纵向干扰校正。可以采用干扰系数校正法或者选择在灵敏度稍低的VIS段摄谱进行干扰。     

地形因素对航空面阵CCD影像的影响分析与评价

地形因素,包括地面起伏和地球曲率,是造成航空数字遥感影像变形的主要原因之一.本文以中国科学院遥感所自行研发的多模态航空CCD相机系统为对象,结合其成像模式和几何形态,分析了地形因素给影像带来的变形,推导出航空面阵CCD影像变形的一般公式,并通过概算进行了定量评价,得出了对于航空面阵CCD影像,要想得到高精度的几何处理,必须改正地球曲率影响的结论.     

台阵地震计程控化正弦标定系统设计

为满足台阵地震计标定要求,通过对程控化标定测控仪和标定测控软件的研究,采用一种适用于台阵地震计的程控化正弦标定方法,对中国地震局地球物理勘探中心负责管理的台阵地震计进行标定。台阵地震计标定实验结果显示,采用程控化正弦标定方法,在缩短标定时长、提高标定效率方面具有显著效果。     

A numerical study of flexural buckling of foliated rock slopes

The occurrence of foliated rock masses is common in mining environment. Methods employing continuum approximation in describing the deformation of such rock masses possess a clear advantage over methods where each rock layer and each inter‐layer interface (joint) is explicitly modelled. In devising such a continuum model it is imperative that moment (couple) stresses and internal rotations associated with the bending of the rock layers be properly incorporated in the model formulation. Such an approach will lead to a Cosserat‐type theory. In the present model, the behaviour of the intact rock layer is assumed to be linearly elastic and the joints are assumed to be elastic–perfectly plastic. Condition of slip at the interfaces are determined by a Mohr–Coulomb criterion with tension cut off at zero normal stress. The theory is valid for large deformations. The model is incorporated into the finite element program AFENA and validated against an analytical solution of elementary buckling problems of a layered medium under gravity loading. A design chart suitable for assessing the stability of slopes in foliated rock masses against flexural buckling failure has been developed. The design chart is easy to use and provides a quick estimate of critical loading factors for slopes in foliated rock masses. It is shown that the model based on Euler's buckling theory as proposed by Cavers (Rock Mechanics and Rock Engineering 1981; 14 :87–104) substantially overestimates the critical heights for a vertical slope and underestimates the same for sub‐vertical slopes. Copyright © 2001 John Wiley & Sons, Ltd.     

Evaluation of spatial variability in snow water equivalent for a high mountain catchment

Multivariate statistical analysis was used to explore relationships between catchment topography and spatial variability in snow accumulation and melt processes in a small headwater catchment in the Spanish Pyrenees. Manual surveys of snow depth and density provided information on the spatial distribution of snow water equivalent (SWE) and its depletion over the course of the 1997 and 1998 melt seasons. A number of indices expressing the topographic control on snow processes were extracted from a detailed digital elevation model of the catchment. Bivariate screening was used to assess the relative importance of these topographic indices in controlling snow accumulation at the start of the melt season, average melt rates and the timing of snow disappearance. This suggested that topographic controls on the redistribution of snow by wind are the most important influence on snow distribution at the start of the melt season. Furthermore, it appeared that spatial patterns of snow disappearance were largely determined by the distribution of snow water equivalent (SWE) at the start of the melt season, rather than by spatial variability in melt rates during the melt season. Binary regression tree models relating snow depth and disappearance date to terrain indices were then constructed. These explained 70–80% of the variance in the observed data. As well as providing insights into the influence of topography on snow processes, it is suggested that the techniques presented herein could be used in the parameterization of distributed snowmelt models, or in the design of efficient stratified snow surveys. Copyright © 2003 John Wiley & Sons, Ltd.