巴布亚新几内亚奥克泰迪铜金矿床成矿特征和控制因素

巴布亚新几内亚西部Fubilan山奥克泰迪矿床是一个世界级铜金矿床,在大地构造上位于新几内亚造山带的巴布亚褶皱带。该矿床的铜金矿化赋存于Fubilan二长斑岩及其周边的磁铁矿夕卡岩和硫化物夕卡岩中。矿石类型以原生硫化物矿石为主,金属矿物包括磁铁矿、黄铁矿、磁黄铁矿、白铁矿、黄铜矿、斑铜矿等。蚀变类型包括夕卡岩化、钾化、泥化和青盘岩化。矿床氧化次生富集带发育,表生矿石矿物为蓝辉铜矿、辉铜矿、自然铜、铜蓝和银金矿。成矿作用主要受区域构造、侵入杂岩体、Darai组灰岩地层、断裂等因素的控制。根据矿床的主岩、矿石特征、蚀变特征和控矿因素,认为该矿床成因类型属于较为典型的夕卡岩—斑岩型矿床。     

Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

BZ19—4海底混输管网优化算法探讨

以海洋油气开发工程为实例,利用HYSYS和PIPEFLOW软件,分析了影响海底混输管网计算的若干因素,指出了HYSYS和PIPEFLOW的适用条件,最终确立了海底混输管网优化算法,提高计算效率。     

Controls of hydrocarbon generation on the development of expulsion fractures in organic-rich shale: Based on the Paleogene Shahejie Formation in the Jiyang Depression,Bohai Bay Basin,East China

The development of expulsion fractures in organic-rich shale is closely related to hydrocarbon generation and expulsion from kerogen. Organic-rich shales from the upper part of the fourth member and the lower part of the third member of the Paleogene Shahejie Formation in the Jiyang Depression, Bohai Bay Basin, East China, are used as an example. Based on thin sections, SEM and thermal simulation experiments, the characteristics of hydrocarbon generation and the conditions supporting the development of expulsion fractures were explored. The key factors influencing these fractures include the presence of kerogens, their distribution along laminae and around particle boundaries, their exposure to heat and the build-up in pressure due to confinement by low permeability. The development of excess pore fluid pressures and intrinsic low rock fracture strength are the main influencing factors. Pressurization by rapid generation of hydrocarbon provides impetus for fracture initiation and cause bitumen to migrate quickly. The shale laminae results in distinctly lower fracture strength laminae-parallel than laminae-normal and this directs the formation of new fractures in the direction of weakness. When pore fluid pressure increases, maximum and minimum principal effective stresses decrease by different proportions with a larger reduction in the maximum principal effective stress. This increases the deviatoric stress and reduces the mean stress, thus driving the rock towards failure. Moreover, the tabular shape of the kerogen aids the generation of hydrocarbon and the initiation of expulsion fractures from the tip and edge. The resulting fractures extend along the laminae when the tensile strength is lower in the vertical direction than in the horizontal direction. Particle contact boundaries are weak and allow fractures to expand around particles and to curve as the stress/strength regime changes. When pore fluid pressure fields at different fracture tips overlap, fractures will propagate and interconnect, forming a network. This paper could provide us more detailed understanding of the forming processes of expulsion fractures and better comprehension about hydrocarbon expulsion (primary migration) in source rocks.     

尼日尔盆地油藏水道沉积构型识别及演化规律

深海水道作为深水环境中重要的储层类型,具有极为丰富的深海油气资源,近年来一直是深海油田勘探和开发的重点区域,但对水道内部构型边界的识别刻画仍然是一个难点。依据三维地震数据以及测井和岩心资料,对西非X油藏水道进行了内部构型边界的精细划分,并分析了其水道演化模式。研究表明：区内水道体系边界可通过地震相特征差异进行识别,并将其分为限制性、半限制性和非限制性3种类型;复合水道边界可通过“垂向分期”和“侧向划界”原则进行确定;单一水道边界可通过水道边界振幅强弱变化进行识别,其在平面上有单侧向迁移和沿下游摆动迁移2种迁移模式,在剖面上单向侧向迁移段水道呈侧向迁移的特征,沿下游摆动段呈现出多期水道相互摆动切叠的特征;水道体系的演化可划分为初始形成、快速发育、平稳发育以及水道消亡4个阶段,对应一个完整的海平面变化旋回。     

江苏沿海互花米草盐沼动态变化及影响因素研究

收集了1988-2001年12个时相的江苏盐城幅卫星影像,提取了双洋河口至梁垛：河闸之间的互花米草盐沼;统计了不同时期的分布信息。分析表明：①互花米草盐沼在江苏扩张非常迅速,到2001年7月互花米草盐沼分布面积达129．28km^2,从射阳河口至梁垛河闸之间的潮问中上带泥滩大部分已被互花米草盐沼所覆盖;②由于生态位的影响,互花米草盐沼沿平行于海岸线方向的扩张速度快于垂直于海岸线方向的扩张速度;③依据野外调查和卫星影像分析,互花米草盐沼扩张可分为3个阶段：立地阶段、快速扩张期及成熟期。此外,还对互花米草盐的影响因素进行了探讨。     

三角褐指藻Phaeodactylum tricornutum的亚硝酸盐释放及其生态学意义

本文在藻类不同生长时期、光照、黑暗和光照+DCMU以及不同硝酸盐浓度、温度和pH条件下,研究了环境因子对三角褐指藻亚硝酸盐释放的影响。研究结果表明:三角褐指藻在光照、硝酸盐浓度大于10μmol/L、温度范围18～22℃和pH为8左右条件下,亚硝酸盐释放速率最大。亚硝酸盐在特定条件下的释放对于我们了解海洋中由浮游植物产生的亚硝酸盐第一最大层的形成机制有着十分重要的意义。