Transverse and longitudinal fluid flow modelling in fractured porous media with non‐matching meshes

A new discrete fracture model is introduced to simulate the steady‐state fluid flow in discontinuous porous media. The formulation uses a multi‐layered approach to capture the effect of both longitudinal and transverse permeability of the discontinuities in the pressure distribution. The formulation allows the independent discretisation of mesh and discontinuities, which do not need to conform. Given that the formulation is developed at the element level, no additional degrees of freedom or special integration procedures are required for coupling the non‐conforming meshes. The proposed model is shown to be reliable regardless of the permeability of the discontinuity being higher or lower than the surrounding domain. Four numerical examples of increasing complexity are solved to demonstrate the efficiency and accuracy of the new technique when compared with results available in the literature. Results show that the proposed method can simulate the fluid pressure distribution in fractured porous media. Furthermore, a sensitivity analysis demonstrated the stability regarding the condition number for wide range values of the coupling parameter.     

基于裂隙渗流效应的水封油库涌水量预测分析

准确预测洞室涌水量和库区渗流场的空间分布特征是确保地下水封油库施工期安全性和运行期经济性的基础性工作之一。为真实地反映地下水封油库围岩随机分布裂隙的渗流效应对涌水量预测和渗流场空间分布特性的影响,提出了一种基于嵌入裂隙单元模型（EFE模型）的裂隙岩体渗流分析方法,并采用该方法对湛江水封油库的三维渗流场进行了计算分析,通过对比工程实测资料,验证了所提出方法的可靠性,进而预测了实例工程在运行期的涌水量。计算结果表明,EFE模型能够较好地模拟裂隙对洞室岩体局部渗流场的影响,反映库区渗流场及洞室涌水量空间分布不均匀的特性。研究成果可为水封洞库渗控措施的精准设计以及运行期污水处理设施配套设计工作提供参考。     

改进的岩质凸块的超载储备极限平衡法

脱离模式是块体理论提出的有限可动块体的失稳模式之一。虽然直接塌落是地下工程中最常见的失稳现象,但是目前依然缺少适用的定量分析方法,这使得地下工程的开挖和加固设计缺乏必要的理论支撑。为此,提出了一种改进的考虑渐进破坏的岩块稳定分析方法。主要改进了3处：(1)引入超载基数和超载方向两个参数来量化描述储备荷载;(2)提出了Tan和Scal两种超载基数设定方式;(3)超载方向设定在节理锥的边界扇面上。算例验证结果表明,改进方法完全兼容现有双面滑模式的安全系数算法,实现了脱离模式的定量稳定性分析。最后,讨论了改进方法的刚度参数取值方法及其敏感性。     

Surface displacements due to batter piles driven in cross‐anisotropic media

This article derives the closed‐form solutions for estimating the vertical surface displacements of cross‐anisotropic media due to various loading types of batter piles. The loading types include an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The proposed solutions are never mentioned in literature and can be developed from Wang and Liao's solutions for a horizontal and vertical point load embedded in the cross‐anisotropic half‐space. The present solutions are identical with Wang's solutions when batter angle equals to 0^°. In addition, the solutions indicate that the surface displacements in cross‐anisotropic media are influenced by the type and degree of material anisotropy, angle of inclination, and loading types. An illustrative example is given at the end of this article to investigate the effect of the type and degree of soil anisotropy (E/E′, G′/E′, and ν/ν′), pile inclination (α), and different loading types (a point load, a uniform skin friction, and a linear variation of skin friction) on vertical surface displacements. Results show that the displacements accounted for pile batter are quite different from those estimated from plumb piles, both driven in cross‐anisotropic media. Copyright © 2007 John Wiley & Sons, Ltd.     

电子手簿的数据存储与文件管理系统设计

提出电子手簿的存储数据方案和一种切实可行的文件管理机制。对方案实施中的有关文件目录表、分配链表的建立、内存单元的动态分配以及混合编程等技术问题进行了详细的阐述。     

WDD型伪随机多功能电法发送机研制

根据伪随机多频激电法的原理及对观测系统的技术要求,设计了WDD型伪随机多功能电法发送机的智能化控制方案,即以MCS-51单片机作为主控单元,编制了可产生多种电流的控制程序;以绝缘栅双极性晶体管(IGBT)作为大功率输出器件,输出最高电压为800 V,最大电流为0 A,功率可达6 kW.试验结果表明仪器性能稳定、安全可靠.     

数字摄像能见度仪器系统控制电路的设计

数字摄像能见度仪器系统(DPVS)是完全仿照人工目测能见度的方法测量能见度的,比传统的透射式、散射式能见度仪更具客观性。为了说明DPVS在硬件方面的工作原理,从该仪器系统的控制电路原理、电路详细构成、元器件的选配、电路设计思路以及系统在实际运行中出现的一些问题和解决方法等方面做了详细介绍。同时还对控制电路中应用的单片机的部分软件做了简要介绍。     

嵌入式导航终端互补分级路网拓扑模型的研究及实现

路径分析是嵌入式导航终端的基本功能。在层次空间数据模型的基础上,本文提出了互补分级数据模型,将整个路网拓扑分为概括拓扑和辅助拓扑两级,并给出两级路网拓扑数据快速合并机制形成详细路网拓扑,使得嵌入式硬件平台上远距离路径分析效率更高。     

移动电子地图技术初探

随着嵌入式技术、通信技术、移动定位技术的发展 ,它们为电子地图技术的发展再次提供了难得发展机遇。本文主要探讨了以上技术和电子地图相结合的可行性 ,分析两种移动电子地图在移动定位、数据处理、数据传输等方面实现的技术以及优缺点     

基于TM1300的G.723.1语音编解码器的实时实现

简要介绍了G．723．1编解码算法原理和TM1300定点DSP芯片，针对该芯片的硬件结构特点，设计了一套运行于TM1300之上的实时语音信号采集－编解码－播放的可行方案。讨论了G．723．1语音编解码器在定点TM1300上实时实现的关键技术及在具体实现过程中的问题，提出了相应的解决方法。试验结果表明，单片的TriMedia1300能实现至少5路实时G．723．1语音编解码。