土石混合料剪切面分形特征试验研究

土石混合料因具有良好的工程特性而被广泛应用于道路、堤坝等工程，填筑体受力后往往沿薄弱面发生剪切破￡混合料的抗剪强度成为稳定和变形分析的重要力学指标。由于土石混合料物质组成的复杂性、结构分布的不规律性及采柠困难性，且受检测仪器的限制，确定其强度指标较为困难。应用改进的直剪试验仪进行了不同类别、不同最大粒径土石福料的室内大型直剪试验，在获得强度指标同时，再现剪切面的实际情况，量测剪切面的起伏特征。根据分形几何学原理，切面具有良好的分形特征，应用三角形棱柱表面积覆盖法编程计算了剪切面的分形维数。初步建立了剪切面分形维数与福料杭萌强度之间的关系，用来快速预测土石混合料的强度指标。     

粒状碎屑溜砂坡运动方程与砂坡土r压力计算（溜砂坡系列研究之三）

在溜砂坡系列研究之二的基础上,对风干砂的运动特征进行了细致观察。将干砂流视为连续介质的流动,对干砂流的运动动力和阻力进行了深入研究,建立了干砂流垂线流速分布方程和干砂流体底面、表面滑动速度方程。结合挡砂工程,将干砂流体视为沿底面（此种砂坡的天然休止角）滑动的三角体,从而导出粒状碎屑溜砂坡水平土压力（或水平推力）计算模型。     

基于小波包变换的面波分离技术研究

依据面波视速度的分布范围,提出一种新的叠前面波分离技术,即把地震波场分成不受面波影响的波场和受面波影响的波场,然后利用小波包变换对受面波影响的波场进行时频分析,通过分解与重构,从中提取有效波,再将其与不受面波影响的波场合并,就可得到面波分离后的地震波场。该方法在成功分离面波的同时,可使有效波的能量(尤其是其低频能量)不受损失,既有效地保持信号的频宽不变,又提高了记录的信噪比。实际资料的处理结果表明:此方法在叠前面波分离方面具有有良好的效果。     

GDX-502树脂富集高效液相色谱法测定地表水中酚类化合物

采用自制GDX-502固相萃取小柱萃取水中苯酚、对硝基酚、间甲酚、2，4-二氯酚、2，4，6-三氯酚、五氯酚等6种酚类化合物，以乙腈作为洗脱剂，选择280nm和290nm双波长紫外高效液相色谱进行检测。结果表明，方法检出限为0．01-0．05mg／L，IL水的平均加标回收率为82．5％-95．0％，精密度（RSD，n=7）为3．6％-9．2％。方法用于实际地表水中痕量酚类化合物的检测，操作简单，有机溶剂用量少，分析效率高；萃取小柱可多次重复使用，分析成本低。     

深圳市景亿山庄滑坡特征及成因分析

根据现场工程地质调查和勘察,论文深入分析了景亿山庄滑坡的变形特征、性质、变形机制,并探讨了滑坡的成因。指出在具有剥蚀残丘地貌特征的场地开挖以砂岩残积物为主要组成物质的边坡时,边坡高陡是造成边坡变形破坏的主要因素。长时间的持续降雨是诱发因素。对于陡倾原生节理裂隙发育的土质和类土质边坡,滑坡周界受边坡体内原生节理裂隙控制,滑坡后缘常沿该陡倾的节理裂隙发育。在深圳等降雨量大的亚热带气候区,若坡体内没有不利于边坡稳定的各种结构面,当边坡开挖高度不超过20m,总体坡率不陡于1∶1时,边坡能够保持短期稳定。但长期稳定性受当地降雨量和降雨强度的控制,开挖后若不采取适当的加固措施,易发生滑坡等浅层病害。其病害从孕育到发生可持续长达10a之久。通过论文的研究,可供在类似地区开挖边坡、整治边坡病害借鉴。     

起伏地表条件下地震波场数值模拟有限积分变换有限差分方法

针对起伏地表条件下的地震波数值模拟问题,提出将起伏的地表映射到一个规则的长方形网格坐标系中,并在此基础上推导出变换域中的波动方程。根据导出来的波动方程应用有限余弦变换有限差分方法进行地震波场的数值模拟,以解决起伏地表条件下的数值模拟。     

Western Pacific Jet Stream Anomalies at 200 hPa in Winter Associated with Oceanic Surface Heating and Transient Eddy Activity

The relationships between the 200-hPa westerly jet stream anomalies over the East Asian coastal water- western Pacific(WPJS),and the oceanic surface heating and synoptic-scale transient eddy(STE)activity anomalies over the North Pacific in wintertime are examined by using ERA-40 and NCEP/NCAR reanalysis data.The analysis demonstrates that the surface heating and the STE anomalies have different patterns, corresponding to the three WPJS anomalous modes,respectively.In the first WPJS anomalous mode,the WPJS main part shows no robust anomaly.The anomalous westerly wind,occurring over the mid-latitude central-eastern Pacific past the date line is associated with the anomalous heating presenting both in the tropical central-eastern Pacific past the date line and the center of the North Pacific basin.Meanwhile,the STE anomaly appears around the region of the anomalous zonal wind.The fluctuation in jet strength shown in the second WPJS mode is strongly related to the heating anomaly in the Kuroshio Current region and the STE anomaly in the jet exit region.The third mode demonstrates a northward/southward shift of the WPJS,which has a statistical connection with a south-north dipolar pattern of the heating anomaly in the western North Pacific separated at 35°N.Meanwhile,the STE spatial displacement is in conjunction with jet shifts in the same direction.The heating anomaly has a close connection with the atmospheric circulation, and thus changes the mid-latitude baroclinicity,leading to the STE anomaly,which then reinforces the WPJS anomaly via internal atmospheric dynamics.     

Road Surface Modeling and Representation from Point Cloud Based on Fuzzy Clustering

A scheme for an automatic road surface modeling from a noisy point cloud is presented. The normal vectors of the point cloud are estimated by distance-weighted fitting of local plane. Then, an automati...     

基于CART集成学习的城市不透水层百分比遥感估算

利用Landsat ETM^＋遥感数据，提出了一种基于CART集成学习的ISP遥感亚像元估算方法，将Boosting重采样技术引入CART分析中，用于提高ISP估算的精度。实验结果表明，该方法的ISP估算性能优于传统的单一CART学习算法，从ETM^＋影像中估算的ISP值与真实值之间的相关系数达到0．91，平均偏差为11．16％。     

Parameterisation of the Planetary Boundary Layer for Diagnostic Wind Models

The planetary boundary-layer (PBL) parameterization is a key issue for the definition of initial wind flow fields in diagnostic models. However, PBL theories usually treat separately stable, neutral, and convective stability conditions, so that their implementation in diagnostic wind models is not straightforward. In the present paper, an attempt is made to adopt a comprehensive PBL parameterisation, covering stable/neutral and unstable atmospheric conditions, which appears suitable to diagnostic models. This parameterisation is implemented into our diagnostic mass-consistent code. A validation of the consistency between the implemented PBL parameterisations has been checked through an analysis of the sensitivity of the vertical wind profiles to atmospheric stability.