Experimental study of the breaking limit of multi-directional random waves passing over an impermeable submerged breakwater

This study investigates experimentally the breaking wave height of multi-directional random waves passing over an impermeable submerged breakwater. Experiments have been conducted in a three-dimensional wave basin equipped with a multi-directional random wave generator. A special type of wave gauge has been newly devised to record the water surface elevations in the breaker zone as accurately as possible. The records are analyzed to estimate the location and limit of wave breaking. Comparisons have also been made with the results of regular waves. The influence of the incident wave conditions on the breaking wave height normalized by the breakwater dimensions has been investigated. Empirical formulae have been presented to estimate the breaking limit of multi-directional random waves based on the experimental records. The formulae have been tested and found to work well not only for multi-directional random waves, but for regular waves as well.     

Surface Elevation Distribution of Sea Waves Based on the Maximum Entropy Principle

A probability density function of surface elevation is obtained through improvement of the method introduced by Cieslikiewicz who employed the maximum entropy principle to investigate the surface elevation distribution. The density function can be easily extended to higher order according to demand and is non-negative everywhere, satisfying the basic behavior of the probability. Moreover because the distribution is derived without any assumption about sea waves, it is found from comparison with several accepted distributions that the new form of distribution can be applied in a wider range of wave conditions. In addition, the density function can be used to fit some observed distributions of surface vertical acceleration although something remains unsolved.     

太平洋波高熵的分布变化规律研究

使用1992年IO月到1998年12月连续共75个月、230个重复周期的Topex／Poseidon卫星高度计有效波高资料，对南、北太平洋波高熵的空间分布特征和时间变化规律进行了研究。统计分析了太平洋波高熵的多年的空间分布特征和多年各月的时间变化规律。结果表明，太平洋波高熵呈现出中间低、南北高的马鞍形空间分布特征和明显季节变化的规律，与太平洋的平均有效波高和气候分布特征和变化规律相一致。给出了南北太平洋模拟波高熵的计算公式及计算稳定性检验。     

A new approach for the solution of the two-dimensional guillotine-cutting problem in ship production

A new approach has been developed for the arrangement of rectangular pieces in plates for the guillotine-cutting problem as encountered in ship production and similar manufacturing processes. The algorithm is quite novel in the sense that instead of making preliminary specifications and ignoring all the alternative arrangements, as is the case for most of the current models, it selectively considers feasible arrangements by eliminating the majority of the probable arrangements that render the problem insolvable. Intermediate steps of the algorithm produce results which cannot be obtained through integer programming. Losses are distributed to the minimum number of plates. The number of arrangement plans is also minimized. Overall the solution of the problem has been drastically simplified to allow even hand calculations instead of long computer runs.     

Monotone Regression and Correction for Order Relation Deviations in Indicator Kriging

The indicator kriging (IK) is one of the most efficient nonparametric methods in geo-statistics. The order relation problem in the conditional cumulative distribution values obtained by IK is the most severe drawback of it. The correction of order relation deviations is an essential and important part of IK approach. A monotone regression was proposed as a new correction method which could minimize the deviation from original quintiles value, although, ensuring all order relations.     

基于DEM的SAR图像模拟

首先阐述了研究基于数字高程模型(DEM)的SAR图像模拟的重要性。然后针对SAR图像的几何特点,并顾及地面坡度、成像距离等因素对雷达波后向散射强度的影响,设计了基于强度积分的SAR图像模拟方案。根据Leberl构像模型计算SAR图像的像点坐标,采用强度积分策略对各点处的强度进行模拟,并进行归一化处理。通过仿真实验得到了满意的SAR模拟图像,验证了该模拟方案的正确性和有效性。     

机载激光雷达平均树高提取研究

为了研究机载激光雷达(LiDAR)树高提取技术,以山东省泰安市徂徕山林场为实验区,于2005年5月进行了机载LiDAR数据获取和外业测量.通过对LiDAR点云数据的分类处理,分别得到了试验区的地面点云子集、植被点云子集和高程归一化的植被点云子集.基于高程归一化的植被点云子集计算了上四分位数处的高度,与实地测量的数据进行了比较,并结合中国森林调查规程进行了实用性分析.结果表明:对于较低密度的点云数据,使用分位数法可以较好地进行林分平均高的估计;机载激光雷达技术对树高估计是可行的,精度都高于87%,总体平均精度为90.59%,其中阔叶树的精度高于针叶树.该试验精度可以满足中国二类森林调查规程中平均树高因子的一般商品林和生态公益林的精度要求,对国有商品林小班的调查精度要求(5%)存在一点差距,需要在国有商品林区进一步开展验证工作.对本试验区而言,已经可以满足其作为森林公园生态公益林的调查要求.     

全站仪似水准法和对向法高程测量的比较研究

通过对似水准法和对向法高程测量原理、误差来源及精度的比较分析,我们发现随着距离和竖直角度的增大,对向法高程测量中误差的变化大于似水准法高程测量中误差的变化;当两观测点间的水平距离小于等于1km时,对向法高程测量精度一般高于似水准法高程测量精度,但是当两观测点间的水平距离大于1km时,似水准法高程测量精度一般高于对向法高程测量精度。     

The Bayesian detection of discontinuities in a polynomial regression and its application to the cycle-slip problem

This paper deals with the problem of detecting and correcting cycle-slips in Global Navigation Satellite System (GNSS) phase data by exploiting the Bayesian theory. The method is here applied to undifferenced observations, because repairing cycle-slips already at this stage could be a useful pre-processing tool, especially for a network of permanent GNSS stations. If a dual frequency receiver is available, the cycle-slips can be easily detected by combining two phase observations or phase and range observations from a single satellite to a single receiver. These combinations, expressed in a distance unit form, are completely free from the geometry and depend only on the ionospheric effect, on the electronic biases and on the initial integer ambiguities; since these terms are expected to be smooth in time, at least in a short period, a cycle-slip in one or both the two carriers can be modelled as a discontinuity in a polynomial regression. The proposed method consists in applying the Bayesian theory to compute the marginal posterior distribution of the discontinuity epoch and to detect it as a maximum a posteriori (MAP) in a very accurate way. Concerning the cycle-slip correction, a couple of simultaneous integer slips in the two carriers is chosen by maximazing the conditional posterior distribution of the discontinuity amplitude given the detected epoch. Numerical experiments on simulated and real data show that the discontinuities with an amplitude 2 or 3 times larger than the noise standard deviation are successfully identified. This means that the Bayesian approach is able to detect and correct cycle-slips using undifferenced GNSS observations even if the slip occurs by one cycle. A comparison with the scientific software BERNESE 5.0 confirms the good performance of the proposed method, especially when data sampled at high frequency (e.g. every 1 s or every 5 s) are available.