高程基面问题浅议

介绍国内现存的几种高程基面,分析工程中使用高程基面时存在的问题,提出测量系统规范化、标准化的紧迫性和必要性。     

How forest gaps shaped plant diversity along an elevational gradient in Wolong National Nature Reserve?

Journal of Geographical Sciences - Understanding the underlying ecological processes that control plant diversity within (α-diversity) and among (β-diversity) forest gaps is important for...     

Curvature derived from LiDAR digital elevation models as simple indicators of debris-flow susceptibility

To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.     

Parallelization of the flow-path network model using a particle-set strategy

High-performance simulation of flow dynamics remains a major challenge in the use of physical-based, fully distributed hydrologic models. Parallel computing has been widely used to overcome efficiency limitation by partitioning a basin into sub-basins and executing calculations among multiple processors. However, existing partition-based parallelization strategies are still hampered by the dependency between inter-connected sub-basins. This study proposed a particle-set strategy to parallelize the flow-path network (FPN) model for achieving higher performance in the simulation of flow dynamics. The FPN model replaced the hydrological calculations on sub-basins with the movements of water packages along the upstream and downstream flow paths. Unlike previous partition-based task decomposition approaches, the proposed particle-set strategy decomposes the computational workload by randomly allocating runoff particles to concurrent computing processors. Simulation experiments of the flow routing process were undertaken to validate the developed particle-set FPN model. The outcomes of hourly outlet discharges were compared with field gauged records, and up to 128 computing processors were tested to explore its speedup capability in parallel computing. The experimental results showed that the proposed framework can achieve similar prediction accuracy and parallel efficiency to that of the Triangulated Irregular Network (TIN)-based Real-Time Integrated Basin Simulator (tRIBS).     

Current-induced scour beneath initially elevated subsea pipelines

When a subsea pipeline is laid on an uneven seabed, certain sections may have an initial elevation with respect to the far-field seabed, e_o, and thus potentially affecting the on-bottom stability of the pipeline. This paper focuses on quantifying the effects of the upstream dimensionless seabed shear stress, θ_∞, and Reynolds number, Re, on: (1) the maximum dimensionless seabed shear stress beneath the pipe, θ_max, to be compared to the critical shear stress in order to determine whether scour would occur and progress towards an equilibrium state; and, (2) the dimensionless equilibrium scour depth beneath the pipe, S_eq/D. Using a 2-D Reynolds averaged Navier-Stokes (RANS) approach along with the k-ω Shear Stress Transport (SST) turbulence model, a parametric study involving 243 computational fluid dynamics (CFD) simulations was conducted. The simulation results were used to develop a closed-form equation for the prediction of θ_max. Subsequently, experimental measurements of S_eq/D have been compiled from published literature, to develop a new closed-form equation for the prediction of S_eq/D with a high correlation to the experimental data. In summary, we present two closed-form equations for the prediction of θ_max and S_eq/D for pipelines with an initial e_o/D, which are applicable for both clear-water and live-bed conditions. The effects of θ_∞ and Re have been included, albeit Re having a small influence as compared to the other parameters.     

Verification and recalibration of HY-2A microwave radiometer brightness temperature

HY-2A is the first one of the Chinese HY-2 ocean satellite series carrying a microwave radiometer(RM)to measure sea surface temperature,sea surface wind speed,atmospheric water vapor,cloud liquid water content,and rain rate.We verified the RM level 1B brightness temperature(T B)to retrieve environmental parameters.In the verification,TB that simulated using the ocean-atmosphere radiative transfer model(RTM)was used as a reference.The total bias and total standard deviation(SD)of the RM level 1B TB,with reference to the RTM simulation,ranged-20.6-4.38 K and 0.7-2.93 K,respectively.We found that both the total bias and the total SD depend on the frequency and polarization,although the values for ascending and descending passes are different.In addition,substantial seasonal variation of the bias was found at all channels.The verification results indicate the RM has some problems regarding calibration,e.g.,correction of antenna spillover and antenna physical emission,especially for the 18.7-GHz channel.Based on error analyses,a statistical recalibration algorithm was designed and recalibration was performed for the RM level 1B TB.Validation of the recalibrated TB indicated that the quality of the recalibrated RM level 1B TB was improved significantly.The bias of the recalibrated T B at all channels was reduced to<0.4 K,seasonal variation was almost eradicated,and SD was diminished(i.e.,the SD of the 18.7-GHz channel was reduced by more than 0.5K).     

粒子加速器中高精度丝线绝对位置测量技术研究

粒子加速器中采用振动线技术进行共架单元上多块磁铁的高精度预准直,需要将振动线代表的磁中心引出进行共架单元之间的相对准直。为了获取以振动线为代表的丝线高精度空间绝对位置,本文对采用近景摄影测量技术进行点、线位置求解的方法进行了研究。利用单相机多站位的方法进行拍摄,通过标定板提供的高精度控制点坐标,采用自标定光束法平差对相机进行标定,并提出将空间直线离散成空间2点进行直线整体精确求解。对标定板上由2点组成的模拟直线进行测量验证,并与标定板提供的理论值进行对比,结果显示空间直线位置获取精度优于5 μm。这表明了本文理论和方法的正确性,为进一步研究丝线高精度空间绝对位置测量打下了基础。     

基于投影变换的线阵旋转扫描相机标定方法

针对线阵旋转扫描相机标定数据难以获取及模型解算不稳定的问题,提出了一种基于投影变换的线阵旋转扫描相机标定方法。首先构建了一种新的线阵旋转扫描相机成像模型,该模型可以根据相机旋转平台参数、线阵旋转扫描相机成像平面与其切平面的位置关系将旋转扫描图像投影为框幅式图像;然后根据构建出的成像模型,采用直接线性变换法和非线性优化方法进行相机标定和参数优化。试验结果表明,此方法简单易行,具有较高的精度。     

DMSP/OLS夜间灯光数据的四川省GDP空间化分析

针对DMSP/OLS夜间灯光数据模拟省级格网GDP问题,该文选取2000、2006以及2010年DMSP/OLS稳定夜间灯光数据、辐射定标夜间灯光数据和四川省第二、三产业社会经济GDP数据,运用相关性分析、对比分析以及回归分析的方法,模拟出四川省GDP空间化密度图并分析与高程之间的关系。结果表明:在省级范围内,GDP与辐射定标灯光数据的相关性明显高于与稳定灯光数据的相关性,且前者的灯光指数CNLI与GDP相关性最高;运用3年的辐射定标灯光数据模拟得到四川省GDP密度图与GDP统计数据的拟合精度均达到0.99以上;2000-2010年四川省GDP呈现由成都市向四周不断扩张的趋势并随高程变化显著,四川省GDP高值区主要集中在高程1 000m以下的成都平原及周边区域,西部高原和山地地区GDP值较低。     

车载激光雷达测量系统整体检校方法

针对目前系统检校常用方法中大多依赖手工提取点时无法准确获得检校点、绝对精度较低、对实际数据的适用性差等问题,该文结合自主研发的车载激光雷达测量系统,提出一种利用带有反射片的特制球形标靶及利用距离阈值插值算法快速、方便且准确地对车载激光雷达测量系统进行外参数检校的方法。结果表明:与传统方法相比,该方法可以完全弥补常规方法中提取的检校点不准确、精度低等缺点,适用性及实用性更强;在绝对精度方面,整体水平精度达到0.05m以下,高程精度达到0.06m以下;在相对精度方面,拟合检校球直径精度达到0.003m以下,距离精度达到0.002m以下,证明该方法的精度、适用性完全满足当前车载激光雷达测量系统检校的精度需求。