基于动三轴试验的压实黄土动强度特性研究

选取吕梁地区黄土,通过静压压实制备三轴试样,在GDS振动三轴仪上研究含水率、干密度和加载频率对压实黄土动强度的影响规律。结果表明:压实黄土的动强度及动强度参数均随振次的增加而减小,随含水率的增大而减小,随干密度和加载频率的增大而增大,动强度与振次之间的关系可用对数方程进行拟合。研究对黄土地区填方区基础建设具有重要意义。     

Distinct patterns of interaction between vegetation and morphodynamics

Dynamic interaction between river morphodynamics and vegetation affects river channel patterns and populations of riparian species. A range of numerical models exists to investigate the interaction between vegetation and morphodynamics. However, many of these models oversimplify either the morphodynamics or the vegetation dynamics, which hampers the development of predictive models for river management. We have developed a model coupling advanced morphodynamics and dynamic vegetation, which is innovative because it includes dynamic ecological processes and progressing vegetation characteristics as opposed to commonly used static vegetation without growth and mortality. Our objective is to understand and quantify the effects of vegetation‐type dependent settling, growth and mortality on the river pattern and morphodynamics of a meandering river. We compared several dynamic vegetation scenarios with different functional trait sets to reference scenarios without vegetation and with static vegetation without growth and mortality. We find distinct differences in morphodynamics and river morphology. The default dynamic vegetation scenario, based on two Salicaceae species, shows an active meandering behaviour, while the static vegetation scenario develops into a static, vegetation‐dominated state. The diverse vegetation patterns in the dynamic scenario reduce lateral migration, increase meander migration rate and create a smoother floodplain compared to the static scenario. Dynamic vegetation results in typical vegetation patterns, vegetation age distribution and river patterns as observed in the field. We show a quantitative interaction between vegetation and morphodynamics, where increasing vegetation cover decreases sediment transport rates. Furthermore, differences in vegetation colonization, density and survival create distinct patterns in river morphology, showing that vegetation properties and dynamics drive the formation of different river morphologies. Our model demonstrates the high sensitivity of channel morphodynamics to various species traits, an understanding which is required for floodplain and stream restoration and more realistic modelling of long‐term river development. Copyright © 2015 John Wiley & Sons, Ltd.     

APPARENT RESISTIVITY TEMPORAL VARIATION CHARAC-TERISTICS AFFECTED BY THE FIXED DISTURBANCE SOURCE ON SURFACE OF MEASURING AREA

Current leakage,metallic conductor,and local anomalous resistivity body are main disturbance sources which affect the successive observation of apparent resistivity in stations,besides the observing system failure.We construct a finite element model using a 3-layered horizontal medium to discuss the dynamic characteristics of disturbances caused by metal conductor and local anomalous resistivity body in the measuring filed.The numerical results show that low resistivity source which is located in areas where the sensitivity coefficient is positive will cause decline on apparent resistivity observation.While low resistivity source will cause increase when it is located in areas where the sensitivity coefficient is negative.Disturbance caused by high resistivity source is opposite to the one from low resistivity source.The general dynamic feature of disturbance is that the disturbance amplitude increases as the resistivity of shallow layer decreases,while the amplitude declines when the shallow layer's resistivity increases.For the measuring direction which has normal annual variation form,low resistivity source which is located in area where the sensitivity coefficient is positive will increase the annual variation amplitude,while it will reduce annual amplitude when it is in a negative sensitivity coefficient area.Annual amplitude changes caused by high resistivity source are opposite to the changes caused by low resistivity source.For the measuring direction which has abnormal annual variation form,dynamic annual feature is opposite to the one in direction of normal annual variation form.If the dynamic feature is opposite to the annual variation and disturbance amplitude is also greater than annual amplitude,the annual variation will change direction.Disturbance amplitude from metallic conductor is affected by the resistivity and cross-section area,the lower of the resistivity and the larger of the cross-section area,the greater of the disturbance amplitude.     

Cyclic resistance and liquefaction behavior of silt and sandy silt soils

The liquefaction behavior and cyclic resistance ratio (CRR) of reconstituted samples of non-plastic silt and sandy silts with 50% and 75% silt content are examined using constant-volume cyclic and monotonic ring shear tests along with bender element shear wave velocity (V_s) measurements. Liquefaction occurred at excess pore water pressure ratios (r_u) between 0.6 and 0.7 associated with cumulative cyclic shear strains (γ) of 4% to 7%, after which cyclic liquefaction ensued with very large shear strains and excess pore water pressure ratio (r_u>0.8). The cyclic ring shear tests demonstrate that cyclic resistance ratio of silt and sandy silts decreases with increasing void ratio, or with decreasing silt content at a certain void ratio. The results also show good agreement with those from cyclic direct simple shear tests on silts and sandy silts. A unique correlation is developed for estimating CRR of silts and sandy silts (with more than 50% silt content) from stress-normalized shear wave velocity measurements (V_s1) with negligible effect of silt content. The results indicate that the existing CRR–V_s1 correlations would underestimate the liquefaction resistance of silts and sandy silt soils.     

基础隔震结构健康监测系统的设计与实现(Ⅱ):系统实现

作为保障工程安全和研究结构灾变机理的重要手段,结构健康监测为研究基础隔震技术在实际工程应用中的问题提供了技术保证。基于"基础隔震结构健康监测系统的设计与实现(Ⅰ):系统设计"中的设计方法,研究某超长基础隔震结构健康监测系统的总体设计、传感器选型与测点布设、数据采集与传输方案及数据库结构设计,并对该系统已获取的监测数据进行初步分析。分析结果表明,该基础隔震结构健康监测系统协调运行状态良好,能实现其预期功能。基于性能状态评价指标对该结构状态进行评价,表明该基础隔震结构性能状态良好。     

强震作用下超高桥墩动力稳定性理论研究

根据平截面假定,考虑超高桥墩大位移变形产生的几何非线性影响,建立超高桥墩的振动控制微分方程,利用变步长的龙格-库塔法进行求解,结合B-R运动判定准则,对超高桥墩在地震作用下的动力失稳机理进行研究。理论分析表明,超高桥墩的动力失稳与桥墩的几何尺寸、质量分布、边界条件有密切关系;桥墩动力失稳时刻随地震波加速度峰值的增大而减小;失稳时刻与失稳加速度荷载有对应关系。算例结果表明:本文方法正确,利用本文理论能够准确计算超高桥墩的失稳时刻及失稳加速度,对超高桥墩动力失稳的理论分析及工程实践有重要指导意义。     

粗颗粒间液桥毛细力演化规律的动态计算方法

水力特性是非饱和土力学理论与工程的重要课题之一,土样水力特性的变化过程本质上可反映为土颗粒间毛细力的演化规律。为此,以粗颗粒为研究对象,将其简化为一对不等径球体颗粒,而其间的水分形态可视为形如圆环的液桥,不考虑颗粒重力和浮力的影响。以Young-Laplace方程为基础,先推得计算液桥毛细力的控制方程组,再结合液桥的无量纲体积最大、最小值及其外曲率半径的割线迭代算法提出求解毛细力的动态计算方法,进而研究毛细力与颗粒间距、颗粒半径比和液桥体积的无量纲关系,结果表明：当颗粒间距一定时,液桥的毛细力随其体积和颗粒半径比增大均呈递增趋势;当液桥体积一定时,其抗拉刚度随颗粒间距增大呈递减趋势。最后,利用已有文献中液桥毛细力与颗粒间距的实测关系,验证了该动态计算方法在表征液桥从形成至断裂时毛细力演化规律的有效性。     

考虑循环软化的非线性动力本构模型在FLAC3D中的实现

已有震害研究表明,震后边坡会因持续变形而破坏,且伴随着土体强度逐渐降低的现象,即土的循环软化行为。因此,有必要研究考虑循环软化的非线性动力本构模型以用于复杂条件下地震边坡稳定性分析。在已有的非线性动力本构模型基础上,提出了考虑循环软化的处理方法。同时,在FLAC3D平台上实现了本构模型二次开发,并通过了理论公式与已有文献中试验数据的验证。结果表明：计算出的骨干曲线与理论公式一致,且计算出的动剪切模量比及阻尼比与试验数据吻合较好,能够克服Hardin-Drnevich模型和Davidenkov模型在较大应变处（>0.01%）过高地估算阻尼比的缺陷;考虑了循环软化后,计算出的剪切强度有明显降低,且当遇到骨干曲线剪应力可以连续地过渡到软化后的主干曲线上,模型的收敛性较好。所开发的本构模型可为大应变条件下软土场地及边坡地震灾害评估提供支持。     

传递函数在场地振动台模型试验中的应用研究

利用场地大型振动台试验,基于传递函数理论,计算得到场地的相对传递函数和绝对传递函数,并对两类传递函数特征以及利用两类传递函数计算场地动力特性参数的差异性进行了对比,并对采用传递函数进行场地频域动力响应估算的可行性和准确性进行了分析。研究结果表明：相对传递函数和绝对传递函数的虚部重合,采用两种传递函数虚部计算场地动力参数具有等同性,且采用两种传递函数虚部曲线计算得到的动力特性参数较为准确;固有频率的计算适合采用两种传递函数的虚部或是相对传递函数的模;场地阻尼比的计算宜采用两种传递函数的虚部或绝对传递函数的模;利用两种传递函数实部、虚部或模计算得到的场地加速度振型是一致的;利用传递函数估算场地频域动力响应是可行的,且相对传递函数的估算结果更加准确。该研究对传递函数在场地动力特性参数计算及场地频域响应估算方面进行了有益的尝试。     

开采上保护层对巨厚砾岩诱发冲击矿压的减冲机制分析

为研究开采上保护层对巨厚砾岩断裂诱发冲击的防治作用,根据跃进煤矿25采区的地质条件和采掘条件,将25110工作面下巷作为研究对象,从理论上分析了动静载叠加诱发冲击矿压的机制以及开采上保护层后的防冲原理,数值模拟研究了未开采上保护时和开采上保护层后在同等强度的动载扰动应力的影响下巷道底板的位移、速度、应力以及塑性区的变化规律,进行相似模拟试验研究了人工震源的作用下未开采上保护时和开采上保护层后巷道底板的加速度和动应力响应规律。结果表明,上保护层开采后能够有效地释放围岩内部的高应力,且采空区顶板自然垮落,形成的软弱松散岩层结构,能够更好地起到对动载扰动应力波的衰减作用,从而降低了冲击矿压发生的可能,一定程度上能够较好地防治冲击矿压。研究成果对巨厚砾岩下冲击矿压的防治具有一定指导意义。