Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

常用GPS载波相位差分电文格式分析与比较

介绍了差分GPS传输载波相位差分信息的常用电文格式，比较了其优缺点，提出了在低带宽的条件下更适合采用CMR格式的结论。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

基桩缺陷逐步能量恢复递推定量分析

通过大量正演计算,对不同桩周土条件下缺陷程度与时域速度响应波形中入射波波幅与反射波波幅的比值进行了相关性分析,拟合出桩侧土为粘土、砂土、粉土条件下桩径变化程度与波幅比之间的关系式。通过理论分析,在基桩存在多缺陷时,导出了缩颈与扩颈对下一个缺陷引起的反射波幅值的影响系数,进而,提出了逐步能量恢复递推缺陷程度的理论与方法,在时间域中,实现了基桩存在多缺陷时的低应变动测缺陷量化分析。模型桩试验分析结果表明,缺陷量化分析方法可取得显著效果。     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.     

地下水"恒流式"单井综合观测方法

以探索水位与水化学单井综合观测新方法为目的，建立了改性动水位概念，即恒定小流量状态下的井孔动水位。理论分析和实验表明，改性动水位与同一井孔对应的静水位之间相差一恒定水位落差。根据这一结果，可将观测得到的改性动水位值订正成相对应的静水位值。由此建立了以改性动水位和传统水化学为观测对象的“恒流式”单井综合观测方法，从而实现了静水位与传统水化学的单井综合观测。     

任意载荷激励下直角三角形板单元局部动力效应

本文推导了在任意载荷激励下直角三角形板单元局部动力效应修正公式。采用单边积分法，对单元边上的单位宽度上的内力进行局部动力修正，代替以往的用加密网格提高精度的方法。计算结果表明，局部动力效应影响不可忽略，本文方法可使计算结果更为精确。这对分析大型复杂结构环境载荷激励下的局部动力效应具有参考价值。     

无伸缩缝桥梁的动力特性研究

针对无伸缩缝桥梁的结构特点，提出一个土-结构的非线性相互作用模型。在此基础上对-无伸缩缝实桥建立有限元模型，分析了不同烈度地震作用下结构的动力特性，并与相应的有伸缩缝桥梁进行比较。文中还计算了主要结构参数对动力特性的影响。研究结果有助于对该类桥梁力学性能的认识。     

确定结构基底等效输入地震动的简化方法

本文用理论和实例计算分析了土与结构间的动力相互作用。根据基底等效输入的地震动相对入射地震动的传递函数特点研究出了一种等效输入的方法，该方法比较好地反映了场地和结构的动力特性对基底等效输入的影响。为利用刚性基底假设理论来分析土-结构动力相互作用提供了一种方法。