孔隙水压力静力触探动态贯入过程的有限元模拟

孔隙水压力静力触探作为一种新型的土体勘测技术已被广泛应用,但是,其机理的研究尚存在很大的不足。笔者系统分析了孔压触探的贯入特征,提出了“孔隙水压力体积基准值”的概念,借此推导出用土体体积变形量计算超孔隙水压力的公式。在此基础上,用轴对称有限单元法模拟探头的动态贯入过程,揭示应力－应变的变化特征,寻找超孔隙水压力生成与消散的规律,对孔压触探的机理进行了研究。     

下辽河平原新近系地下水开采的动态变化特征

新近系地下淡水是下辽河三角洲地区的盘锦市和辽河油田主要供水水源.地下水处于封闭到半封闭环境,包括明化镇组(Nm)和馆陶组(Ng)两个含水岩组.天然状态下,地下水位接近或高于地表;开采条件下,地下水位逐年下降,形成区域性降落漏斗,地下水流场均发生显著变化,形成汇向开采区的向心流场.开采明化镇组地下水为主的盘东水源地,开采初期水位下降速率为1.61~5.19 m/a,至1996年降至0 63~1.03 m/a;馆陶组地下水为主的各水源地,开采初期水位下降速率为2.10~4.21 m/a,至1996年减至1.49~2.05 m/a.这是由于地下水流场变化,导致明化镇咸水体内侵和下移所致,该地地下水中Cl-的不断增高也证明了这一点.至1998年,平面上,咸水体每年增加3.18 km2,盘东水源南部,咸水体内侵速率已达每年220 m.垂向上咸水体年下移速率一般每年0.5~1.67 m.进行新近系地下水动态特征和演化趋势研究,将为合理开发利用宝贵的淡水资源提供科学依据.     

岩层移动动态过程的离散单元法分析

采动覆岩动态发展过程受地质、采矿条件诸多因素的影响,是一个十分复杂的时空过程。通过离散单元法数值模拟,揭示了综放开采条件下采场上覆岩层动态发展规律,特别是覆岩离层缝隙的分布规律、发展形态、空间位置以及与地质采矿条件的关系,揭示了工作面推进过程中,采场上覆岩层中重新分布的应力大小、方向及其发展变化规律,该应力的存在和变化规律是确定井下开采方法、支护方式的依据。     

采用土工合成材料的新型护岸结构的动态数值模拟

固化土和土工格栅护岸工法（SG-WALL工法）是一种采用固化土和土工格栅加固港口护岸结构的新型工法。它的抗震性能已经通过一系列振动台试验得到了确认。为了能够数值再现SG-WALL结构在地震荷载作用下的动力反应,对SG-WALL结构的振动台试验进行了动态数值模拟研究。试验和模拟结果的对比表明,数值模拟方法能够再现SG-WALL结构在振动荷载作用下的主要动力特征。模拟结果还表明：固化土的长度对SG-WALL抗震性能起到重要的影响;土工格栅的最大拉应变发生在与排桩的连接处,并且沿着远离排桩的方向逐渐减小。     

鄂东北大别杂岩中混合岩形成的动力学机制

本文针对中小位移量伸缩缝构造进行设计研究，提出了一种常温固化型桥梁伸缩缝。经过对伸缩量Δ２０ｃｍ，Δ＝４０ｃｍ的多座桥梁的实验应用表明，这是一种适用于中小位移量桥梁中性能良好的伸缩缝，施工简便。其桥缝具体结构为，在两侧拍击区采用钢纤维混凝土增，缝内用高分子聚合物与一定比例的水泥及掺合物拌和均匀，经一段时间与桥面和加固铺装层固化成具有较高弹性和一定强度的整体式桥梁伸缩缝。其效果良好，供应用参考。     

Aerodynamic Characteristics of the Crest with Membrane Attachment on Cretaceous Pterodactyloid Nyctosaurus

The Nyctosaurus specimen KJ1 was reconstructed under the hypothesis that there is a membrane attached to the crest; the so-called headsail crest. The aerodynamic forces and moment acting on the headsail crest were analyzed. It was shown that KJ1 might adjust the angle of the headsail crest relative to the air current as one way to generate thrust (one of the aerodynamic forces, used to overcome body drag in forward flight) and that the magnitude of the thrust and moment could vary with the gesture angle and the relative location between the aerodynamic center of the headsail crest and body’s center of gravity. Three scenarios were tested for comparison: the crest with membrane attachment, the crest without membrane attachment and the absence of a cranial crest. It was shown that the aerodynamic characteristics (increasing, maintaining and decreasing thrusts and moment) would have almost disappear in flight for the crest without membrane attachment and was non-existent without the cranial crest. It is suggested from aerodynamics evidence alone that Nyctosaurus specimen KJ1 had a membrane attached to the crest and used this reconstructed form for auxiliary flight control.     

Fuzzy factorial analysis of snow avalanches

The mutual influence of 21 factors pertaining to terrain, weather, forest and snowpack have been discussed by 10 experts. The semantic (nil, weak, medium, high) evaluations are translated as membership degrees of fuzzy sets, and averaged between the experts by taking their fuzzy expectation value, yielding a 21 × 21 fuzzy matrix for direct interactions. Fuzzy successive multiplications and additions of the matrix give the indirect interactions. The activity and the passivity of the factors with respect to avalanches is represented by directed weighted graphs, and the average semantic values by a 4 × 4 matrix: the activity (passivity) is weak (strong) for tree damage; medium (nil) for altitude; medium (weak) for ground shape; medium (medium) for vegetation, soil, wind, microclimate, tree type, vertical distribution and mechanics of trees, snowpack distribution and snow gliding; strong (nil) for ground inclination and exposition, weather; strong (medium) for heat, precipitation, horizontal distribution of trees, snowpack constitution and stability.     

水下拖曳系统运动姿态仿真研究

采用凝集参数法建立了水下拖曳系统的三维离散模型,该模型由一系列的质量点和不计重量的弹簧组成.采用数学模型编程对NCEL浮球实验和四个典型拖曳系统进行了仿真计算.计算结果表明此数学模型具有一定的理论意义和工程实用价值.     

对模式匹配算法的存储优化研究

基于确定性有限自动机(DFA)的多模式匹配算法被广泛用于数据包深度检测系统中。它功能虽然强大,但是对内存的需求也比较大,因此很多算法提出了对它的优化方法,以减少对内存的需求量。本文通过用动态默认转移来替代DFA的failto转移,将DFA中大部分的failto转移删掉,从而达到优化DFA的目的。而且本算法易于用硬件实现,因此在对速度有要求的场合,可以通过专门的硬件来计算默认转移,这样默认转移的计算并不会对检测产生延迟,从而加快匹配速度。