Corrected Formula of Bed Resistance Coefficient for Plane Numerical Simulation of Tidal Current

By means of a logarithm law for the velocity profile,a corrected formula of bed resistancecoefficient,which involves many factors such as gradient of still water depth,variation of surfaceelevation,flow direction,and so on,is derived from the 3D governing equations of tidal current by aver-aging over the whole water depth.Theoretical analysis and application have shown that the 2D plane tidalcurrent numerical model would be more reasonable and could be applied to steep bottom topographywhen the corrected bed resistance coefficient is used,therefore the results of reproduction simulation andengineering calculation would be more scientific and reasonable.     

开敞式滩海油田保滩促淤工程研究

分析了飞雁滩油田海区的海洋环境条件,试验研究了不同结构型式潜堤的稳定性和保滩促淤效果,对潜堤的保滩促淤效果和淤积速率进行了预测,对工程布置、潜堤结构方案、基础冲刷防护措施和潜堤顶高程提出了建议．     

Wave Attenuation Performance and the Influencing Factors of A Lower Arc-Plate Breakwater

Comprehensive experimental and numerical studies have been undertaken to investigate wave energy dissipation performance and main influencing factors of a lower arc-plate breakwater. The numerical model, which considers nonlinear interactions between waves and the arc-plate breakwater, has been constructed by using the velocity wave- generating method, the volume of fluid (VOF) method and the finite volume method. The results show that the relative width, relative height and relative submergence of the breakwater are three main influencing factors and have significant influence on wave energy dissipation of the lower arc-plate open breakwater. The transmission coefficient is found to decrease with the increasing relative width, and the minimum transmission coefficient is 0.15 when the relative width is 0.45. The reflection coefficient is found to vary slightly with the relative width, and the maximum reflection coefficient is 0.53 when the relative width is 0.45. The transmission and reflection coefficients are shown to increase with the relative wave height for approximately 85% of the experimental tests when the relative width is 0.19 0.45. The transmission coefficients at relative submergences of 0.04, 0.02 and 0 are clearly shown to be greater than those at relative submergences of 0.02 and 0.04, while the reflection coefficient exhibits the opposite relationship. After the wave interacts with the lower arc-plate breakwater, the wave energy is mainly converted into transmission, reflection and dissipation energies. The wave attenuation performance is clearly weakened for waves with greater heights and longer periods.     

沟槽内海底管道的水动力特性研究

基于水力模型实验，引入相对沟形系数αｒ，获得了以αｒ为表征的相对水动力系数与ＫＣ数的关系；对于浅沟而言，这种关系较有规律性。根据所设计沟形的αｒ值和所选定的ＫＣ值，应用本文结果，可以方便地判断其力折减程度和掩护效果     

A New Way to Study Water-Vapor Absorption Coefficient

In the visible spectrum, the atmospheric attenuations to sunlight mainly include aerosol scattering, atmospheric molecule Rayleigh scattering and ozone absorption, while in the near-infrared spectrum （from 650 nm to 1 000 nm）, we must take water-vapor absorption into account. Based on the atmospheric correction theory, using spectrum irradiance data measured by Instantaneous Ground spectrometer, ozone content measured by Microtops Ⅱ ozone monitor, water-vapor content and aerosol optical thickness measured by sun photometer, we give a new way to study water-vapor absorption to sunlight, and the result shows that the main peak values of water-vapor absorption coefficients are 0.025 cm^-1, 0.073 cm^-1, 0.124 cm^-1, 0.090 cm^-1, 0.141 cm^-1 and 0.417 cm^-1, which respectively lie at 692 nm, 725 nm, 761 nm, 818 nm, 912 nm and 937 nm.     

Imaging of Buried Archaeological Materials: The Reflection Properties of Archaeological Wood

Effective marine archaeological site management demands detailed information on not only the spatial distribution of artefacts but also the degradation state of the materials present. Although sonar methods have frequently been used in an attempt to detect buried wooden shipwrecks they are currently unable to indicate their degradation state. To assess the sensitivity of acoustic measurements to changes in the degradation state of such material, and hence the potential for sonars to quantify degradation, laboratory measurements of compressional wave velocity, as well as bulk density for oak and pine samples, in varying states of decay, were undertaken. These data enabled the calculation of theoretical reflection coefficients for such materials buried in various marine sediments. As wood degrades, the reflection coefficients become more negative, resulting in the hypothesis that the more degraded wood becomes, the easier it should be to detect. Typical reflection coefficients of the order of −0.43 and −0.52 for the most degraded oak and pine samples in sand are predicted. Conversely, for wood exposed to seawater the predicted reflection coefficients are large and positive for undegraded material (0.35 for oak, 0.18 for pine) and decrease to zero or slightly below for the most degraded samples. This indicates that exposed timbers, when heavily degraded, can be acoustically transparent and so undetectable by acoustic methods. Corroboration of these experimental results was provided through comparison with high resolution seismic reflection data that has been acquired over two shipwrecks.     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

Sediment–water interactions of natural oestrogens under estuarine conditions

The natural human female hormones oestrone and 17β-oestradiol have been implicated in the disruption of endocrine systems in some wildlife adjacent to sewage effluents. The sorption behaviour of these two compounds under estuarine conditions was studied by spiking either 2.55 μg of oestrone or 2.65 μg of 17β-oestradiol in kinetic experiments. In equilibrium experiments, 3 ng of oestrone or 3.2 ng of 17β-oestradiol was added in each of the centrifuge tubes. Sorption onto sediment particles was relatively slow, with sorption equilibrium being reached in about 70 and 170 h for oestrone and 17β-oestradiol, respectively. The effects of a variety of environmental parameters on sorption were studied including salinity, sediment concentration (SC), the presence of a third phase, particle size and, also, surfactant concentrations. Results show that although salinity did not induce any statistically significant effect on the sorption of 17β-oestradiol, it did statistically enhance the sorption of oestrone, and a salting constant of 0.3 l mol⁻¹ was derived. The partition coefficient for both compounds decreased with increasing sediment concentration, a phenomenon that has been widely reported and attributed to the presence of colloids (which could enhance dissolved concentrations). In this paper, the true partition coefficients for sediment particles (K_p^true) and colloidal particles (K_c^true) have been calculated, and a K_p^true value of 141 and 102 ml g⁻¹ was obtained for oestrone and 17β-oestradiol, respectively. In addition, K_c^true values for oestrone (222×10² ml g⁻¹) and 17β-oestradiol (135×10² ml g⁻¹) were two orders of magnitude higher than their respective K_p^true values, suggesting that the colloidal particles are significantly stronger sorbents for natural oestrogens than sediment particles. Particles of different sizes were found to have different partition coefficients due to the strong relationships between partition coefficients for the two compounds and particulate organic carbon (POC) contents and specific surface areas (SSAs). The presence of a surfactant was shown to reduce the partition coefficients for the two compounds, although its concentrations being used were higher than those normally found in the natural environment.     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.