Research on the Application of Fast-steering Mirror in Stellar Interferometers

In stellar interferometers, the fast-steering mirror (FSM) is widely utilized to correct the wavefront tilt caused by the atmospheric turbulence and internal instrumental vibration, because of its high resolution and fast response frequency. In this study, the non-coplanar error between the FSM and the actuator deflection axis introduced by the manufacturing, assembly, and adjustment is analyzed systematically. Via a numerical method, the additional optical path difference (OPD) caused by the above factors is studied, and its effect on the fringe tracking accuracy of a stellar interferometer is also discussed. On the other hand, the starlight parallelism between the beams of two arms is one of the main factors for the loss of fringe visibility. By analyzing the influence of wavefront tilt caused by the atmospheric turbulence on fringe visibility, a simple and efficient real-time correction scheme of starlight parallelism is proposed based on a single array detector. The feasibility of this scheme is demonstrated by a laboratory experiment. The results show that after the correction of fast-steering mirror, the starlight parallelism meets preliminarily the requirement of a stellar interferometer on the wavefront tilt.     

折射/谐衍射红外双波段成像光谱仪系统研究

为了获取足够的目标信息,充分利用中波红外和长波红外的光谱信息,建立了谐衍射中、长波红外超光谱成像系统.利用谐衍射元件独特的色散特性,将谐衍射透镜应用于中、长波红外超光谱成像系统中,使系统在中波红外3.7—4.8 μm和长波红外8—12 μm的2个红外大气窗口内获取数百个光谱图像.设计结果表明,中波红外波段,在18对线/mm处光学系统的调制传递函数(MTF)大于0.55;长波红外波段,在13对线/mm处光学系统的MTF大于0.5;光学系统的衍射环绕能,在中波红外波段30 μm半径范围内大于85%,在长波红外     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

凡纳滨对虾C-型凝集素LvLec2 对不同刺激的免疫应答

克隆获得了与中国明对虾(Fenneropenaeus chinensis)C-type lectin 3同源的C-型凝集素LvLec2基因序列,并通过Real-time PCR研究了其在脂多糖(lipopolysaccharide,简称LPS)、灭活溶壁微球菌(Micrococcus lysodeikticus)和白斑综合症病毒(white spot syndrome virus,简称WSSV)刺激后的转录表达变化。结果表明,LvLec2编码157个氨基酸,含有1个糖识别结构域(carbohydrate recognition domain,简称CRD),其CRD结构域中具有决定糖结合特异性的基序"EPS"(Glu118-Pro119-Ser120)序列。系统进化树分析表明LvLec2与已发表的凡纳滨对虾(Litopenaeus vannamei)C-型凝集素亲缘较远。LPS、灭活溶壁微球菌和WSSV刺激后,LvLec2基因在肝胰脏中的转录表达有明显的变化但表达模式不同。LvLec2可能作为模式识别受体参与了对虾对病原的识别或防御。     

皖浙赣断裂带的界定及其基本特征

以往文献中及众多研究者所指的“皖浙赣断裂带”实际上包括了不同时代形成的、方向有变化的多组规模巨大的区域性断裂带;最早的断裂带形成于新元古代,最晚的形成于晚中生代。在地壳演化过程中,随着构造应力场的变化,不同时代的断裂带方向变化较大,新元古代晋宁期为北东向,早古生代加里东期为近东西向—北东东向,晚中生代为北北东向;每一期断裂带都有它们自己的大地构造背景和指示意义。文中认为,不同阶段形成的断裂带不能混为一谈。新元古代晋宁期的北东向断裂带南段基本上以赣东北蛇绿混杂岩带为代表,向北东延至皖南伏川断裂带,具有板块(或地体)边界断裂的性质;加里东期以近东西向祁门—歙县断裂带为代表,其西段被后期牵引成北东向,造成两侧的变质基底特征明显不同;二者均不属于皖浙赣断裂带的组成部分。而通常意义上所指的具有区域控岩控矿作用的皖浙赣断裂带,是晚中生代北北东向的赣东北—五城—歙县—绩溪—宁国断裂带,控制了侏罗—白垩纪红色盆地及燕山期岩浆岩的形成和分布,是一条具有控矿作用的重要的构造岩浆岩带。     

地震-电成像联合探测试验——以淄博市活断层探测为例

在城市浅部活断层探测中,地震和电成像是2种主要的地球物理勘探手段。它们既可独立开展工作,也可在地质构造复杂地段进行联合探测,以更合理地解释探测区域的地质构造。文中利用电阻率和地震纵波速度之间的简单关系,进行了地震-电成像联合反演的初步探索。结果表明,通过参考电成像图像的电阻率分布,可获得合理的准二维地震波叠加速度模型,最终获得探测区域合理的地震时/深剖面,深化对地质构造的认识和提供合理的解释     

中条裂谷的递进演化与王屋山地区铜矿成矿地质条件分析

对中条—王屋山地区前寒武纪沉积建造、岩浆建造、构造形态的分析后,反演出中条裂谷的递进演化过程,认为王屋山地区在中条裂谷和区域地壳的演化过程中形成了极为有利的成矿条件:①形成多层含矿建造;②通达地幔的深大断裂提供了丰富的矿源和成矿空间;③频繁的岩浆活动补充了矿质并提供了成矿热能;④剥离断层系统进一步提供了扩容空间;⑤以活化转移为主要机制的强烈变形变质作用对已形成的含矿建造(矿源层)进行改造。因此,王屋山地区具有巨大的找矿潜力。     

漳州市山体滑坡主要影响因素分析

对漳州市区域内近十几年来所发生滑坡的地质灾害点进行调查研究,提出了漳州地区山体滑坡主要受地形、地质、气象和人类工程活动因素的综合影响。一般地形坡度在25°～50°,坡型为阶梯型、人工边坡无支挡,土质边坡坡度大于70°与坡高大于4m者,连续10d内降雨量在170mm以上,且日降雨量在100mm的强降雨时,发生滑坡的概率,达71.7%。故此,降雨量170mm以上、日降雨量大于或等于100mm时,可作为漳州市地质灾害预警预报的指标。     

A note on the consolidation settlement of a rigid circular foundation on a poroelastic halfspace

This paper uses Biot's poroelasticity approach to examine the consolidation behaviour of a rigid foundation with a frictionless base in contact with a poroelastic halfspace. The mathematical development of the mixed boundary value problem involves a set of dual integral equations in the Laplace transform domain which cannot be conveniently solved by employing conventional procedures. In this paper, a numerical solution is developed using a scheme where the contact normal stress is approximated by a discretized equivalent. The influence of limiting drainage boundary conditions at the entire surface of the halfspace on the degree of consolidation of the rigid circular foundation is investigated. The results obtained in this study are compared with the corresponding results given in the literature. Copyright © 2016 John Wiley & Sons, Ltd.     

One‐dimensional dynamics of saturated incompressible porous media: analytical solutions and influence of inertia terms

The complexity of formulations for the hydromechanical coupled mechanics of porous media is typically minimised by simplifying assumptions such as neglecting the effect of inertia terms. For example, three formulations commonly employed to model practical problems are classified as fully dynamic, simplified dynamic and quasi‐static. Thus, depending on the porous media conditions, each formulation will have advantages and limitations. This paper presents a comprehensive analysis of these limitations when solving one‐dimensional fully saturated porous media problems in addition to a new solution that considers a more general loading situation. A phase diagram is developed to assist on the selection of which formulation is more appropriate and convenient regarding particular cases of porosity and hydraulic conductivity values. Non‐dimensional formulations are proposed to achieve this goal. Results using the analytical solutions are compared against numerical values obtained with the finite element method, and the effect of porosity is investigated. Copyright © 2016 John Wiley & Sons, Ltd.