Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Overtopping Discharge of Wind-Waves on Simple Slope Dikes

An empirical formula for estimating the overtopping discharge of wind-waves on a smooth-impermeable-simple slope dyke is derived through model tests in this paper, it can be adopted by related design departments in the determination of the crest elevation of the dyke.     

面向GIS的线状符号开放式多元设计方案

提出一种跨越专业限制，用于快速绘制任意曲率曲线的开放式线状符号“组合配置法”设计方案，即用主干线、辅助线、辅助圆和点符号等四种子线型的有机组合描述目标线型，并详细论述了其数据结构、文件结构及子线型的实现方法。同时还提出伪码法用于解决满足国标要求的图廓整饰线，并对裁剪法作了简要阐述。上述线型设计方法已成功设计、实现并应用于“海底地形成图系统(MBChar)”，已服务于大陆架海底成图项目。     

对称式布置锚链系统的线性化处理

用悬链线方程求解了不同锚链状态的锚链力 ,并用多项式回归了锚链力与锚固点位移的关系 ,由此求得锚链恢复力刚度系数。分析了对称式布置锚链系统的非线性程度 ,阐述对称式布置锚链系统所提供的恢复力作线性化处理的可行性及方法 ,并给出了对称布置锚链系统的线性刚度矩阵。为各类受对称式布置锚链系统约束的浮动结构物的动力分析提供了理论依据     

东营城区高精度三维地震采集方法研究

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。     

黄河利津水文站不同粒径悬浮颗粒物中有机碳含量的研究

估算不同粒径TSS中POC的入海日通量,对黄河利津水文站悬浮颗粒物(total suspended solid,TSS)样品,采用基于stokes原理的沉降法分为Ⅴ级,对分级后的样品测其有机碳(particulate organic carbon,POC)含量和粒度组成。在此基础上,用多元线性回归法对数据进一步处理,准确得到样品中不同粒径TSS中POC的含量。研究表明,黄河口淡水端水体TSS,<8μm的粘土和极细粉砂、8~16μm的细粉砂中,POC的含量为0.600%和0.400%左右;16~32μm的中粉砂中,POC的含量不足0.200%;而32~63μm的粗粉砂和>63μm砂中POC含量仅为0.050%和0.004%左右,80%以上的POC主要集中在<16μm的TSS中,而<32μm的TSS承载了95%以上的POC。     

Modelling the relationship between sexual reproduction and rhizome growth in Posidonia oceanica (L.) Delile

The relationship between flowering and growth performance of Posidonia oceanica (L.) Delile in meadows distributed along the south‐eastern coast of Sicily (Italy) was investigated by means of a statistical model (generalized linear mixed model) combined with the lepidochronological analysis. Over a 28‐year period, 67 floral stalk remains were observed. The highest flowering index was recorded in lepidochronological year 1998 (10.1%) and the Inflorescence Frequency per age showed a clear decrease corresponding to 15‐year‐old shoots. The sexual reproductive event had positive effects on rhizome elongation (cm year^?1) and leaf production (no. leaves year^?1) in the same flowering year, whilst no effect on the rhizome production (mg year^?1) was observed. Rhizome growth variables showed significant negative lagged responses in the two years following flowering. On the whole, we calculated that the effect exerted by flowering, in terms of loss on rhizome elongation and production, was about 27% and 38%, respectively. Although it has been demonstrated that recovery from the stress induced by sexual reproduction is limited to the two years after flowering, the magnitude of the reproductive cost may become quite considerable especially in comparison with the whole lifespan of individual shoots.     

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.     

A Linear Programming Model for Seabed Oil-Gas Pipe Network

This paper analyzes the pipe network system of oil-gas collection and transportation foroffshore oilfield development.A"0-1"integer linear programming model is constructed to optimize theinvestment of seabed pipe network.The mathematical model is solved by the spanning tree method ofgraph theory and network analysis.All spanning trees of a network graph compose all the feasible solu-tions of the mathematical model.The optimal solution of the model is the spanning tree with the minimumcost among all spanning trees.This method can be used to optimize the seabed pipe network system andgive a minimum cost plan for the development of offshore marginal oilfield groups.