Wavelet analysis and interpretation of gravity data in Sichuan-Yunnan region, China

Introduction Sichuan-Yunnan region, located in the east margin of Qinghai-Xizang (Tibetean) Plateau, is a transitional zone between the rapidly upheaving Tibetean Plateau and relatively steady Yangtze Platform. Under the pressure exerted by the northward movement of Indian Plate, Sichuan-Yunnan region has been undergone strong deformation and regmagenesis, becoming one of the regions with the most intensive seismicity in the world. The research on the tectonics and seismicity there is alw…     

A complex, Subplinian-type eruption from low-viscosity, phonolitic to tephri-phonolitic magma: the AD 472 (Pollena) eruption of Somma-Vesuvius, Italy

The combined use of field investigation and laboratory analyses allowed the detailed stratigraphic reconstruction of the Pollena eruption (472 AD) of Somma-Vesuvius. Three main eruptive phases were recognized, related either to changes in the eruptive processes and/or to relative changes of melt composition. The eruption shows a pulsating behavior with deposition of pyroclastic fall beds and generation of dilute and dense pyroclastic density currents (PDC). The eruptive mechanisms and transportation dynamics were reconstructed for the whole eruption. Column heights were between 12 and 20 km, corresponding to mass discharge rates (MDR) of 7×10⁶ kg/s and 3.4×10⁷ kg/s. Eruptive dynamics were driven by magmatic fragmentation of a phono-tephritic to tephri-phonolitic magma during Phases I and II, whereas phreatomagmatic fragmentation dominated Phase III. Magma composition varies between phonolitic and tephritic-phonolitic, with melt viscosity likely not in excess of 10³ Pa s. The volume of the pyroclastic fall deposits, calculated by using of proximal isopachs, is 0.44 km³. This increases to 1.38 km³ if ash volumes are extrapolated on a log thickness vs. square root area diagram using one distal isopach and column height.Editorial responsibility: R Cioni     

Diagnosing snow accumulation errors in a rain‐snow transitional environment with snow board observations

Diagnosing the source of errors in snow models requires intensive observations, a flexible model framework to test competing hypotheses, and a methodology to systematically test the dominant snow processes. We present a novel process‐based approach to diagnose model errors through an example that focuses on snow accumulation processes (precipitation partitioning, new snow density, and snow compaction). Twelve years of meteorological and snow board measurements were used to identify the main source of model error on each snow accumulation day. Results show that modeled values of new snow density were outside observational uncertainties in 52% of days available for evaluation, while precipitation partitioning and compaction were in error 45% and 16% of the time, respectively. Precipitation partitioning errors mattered more for total winter accumulation during the anomalously warm winter of 2014–2015, when a higher fraction of precipitation fell within the temperature range where partition methods had the largest error. These results demonstrate how isolating individual model processes can identify the primary source(s) of model error, which helps prioritize future research.     

From soil aggregates to riverine flocs: a laboratory experiment assessing the respective effects of soil type and flow shear stress on particles characteristics

Particles eroded from hillslopes and exported to rivers are recognized to be composite particles of high internal complexity. Their architecture and composition are known to influence their transport behaviour within the water column relative to discrete particles. To‐date, hillslope erosion studies consider aggregates to be stable once they are detached from the soil matrix. However, lowland rivers and estuaries studies often suggest that particle structure and dynamics are controlled by flocculation within the water column. In order to improve the understanding of particle dynamics along the continuum from hillslopes to the lowland river environment, soil particle behaviour was tested under controlled laboratory conditions. Seven flume erosion and deposition experiments, designed to simulate a natural erosive event, and five shear cell experiments were performed using three contrasting materials: two of them were poorly developed and as such can not be considered as soils, whilst the third one was a calcareous brown soil. These experiments revealed that soil aggregates were prone to disaggregation within the water column and that flocculation may affect their size distribution during transport. Large differences in effective particle size were found between soil types during the rising limb of the bed shear stress sequence. Indeed, at the maximum applied bed shear stress, the aggregated particles median diameter was found to be three times larger for the well‐developed soil than for the two others. Differences were smaller in the falling limb, suggesting that soil aggregates underwent structural changes. However, characterization of particles strength parameters showed that these changes did not fully turn soil aggregates into flocs, but rather into hybrid soil aggregate–floc particles. Copyright © 2013 John Wiley & Sons, Ltd.     

Contained density currents with high volume of release

Contained density currents with high volume of release reflect against the boundaries of the reception environment commonly leading to oscillatory flow. These flows exist in sediment clarifiers, compromising their operations, and deposited signatures of contained turbidity currents are found as part of the infill of sedimentary basins; for operation of the former and interpretation of the latter it is essential to understand the dynamic processes of these flows. Six lock‐exchange experiments with different initial densities were made in a horizontal flume, where the volume of the saline mixture in the lock was equivalent to the volume of the ambient fluid. A further two tests, with a repeated initial density, were made: one with high volume of release and very long duration; and another with low volume of release. Firstly, the movement of the current is discussed, including the oscillations within the experimental tank involving the density current and an upper layer counter‐current. It is shown that the cyclic behaviour is self‐similar with the reduced gravity of the initial density in the lock. Secondly, entrainment and water mixing processes are characterized. The time evolution of mixing is characterized qualitatively by analysing the background potential energy of the density distributions to show that mixing occurs even in the earlier stages of the current, and mainly within the first cycle of the oscillation. Quantified analysis reveals that, in currents with high volume of release, entrainment discharge is one order of magnitude higher, mainly due to the larger interface between the ambient fluid and the current. A model for the evolution of the mixing process is proposed for density currents with high volume of release. Finally, the dynamics of the head of the current is analysed. The entrainment in the head, when compared to the entrainment in the remainder body of the flows, is less important for the configuration with a larger lock.     

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.     

基于规则格网的DEM插值实验

通过地形建模,将6个地形隶属函数按照101×101,112×112,126×126,144×144,168×168,201×201,257×257 7种格网密度生成6种局部地形单元的规则格网DEM;使用反距离加权(IDW)等7种插值算法,将前6种格网密度下的DEM插值成257×257规格;从原始257×257DEM中随机抽取检查点计算残差,并对残差中误差进行分析。通过分组插值实验,运用控制变量法、方差分析等方法研究地貌类型、采样密度和插值算法对DEM插值精度的影响。