海洋重力大地水准面的确定

美国海洋卫星测高仪的出现,使应用Hotine积分确定海洋大地水准面成为现实。本文通过对Hotine积分及垂线偏差的计算公式进行改进,较好地改善了求和项的收敛性,减小了截断误差影响,并提出了利用Hotine函数和重力异常确定海洋大地水准面的方法。 实际计算表明:海洋重力大地水准面的精度在1米以内;卫星测高大地水准面间存在0.5米系统差;它和海底地形有一定的相关性,能较好地反映出海底地形的宏观特性。     

ON THE EVALUATION OF DEFLECTIONS OF THE VERTICAL USING FFT TECHNIQUE

1　ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｆａｓｔＦｏｕｒｉｅｒｔｒａｎｓｆｏｒｍ (ＦＦＴ)ｔｅｃｈｎｉｑｕｅｉｓａｖｅｒｙｐｏｗｅｒｆｕｌｔｏｏｌｆｏｒｔｈｅｅｆｆｉｃｉｅｎｔｅｖａｌｕａｔｉｏｎｏｆｇｒａｖｉｔｙｆｉｅｌｄｃｏｎｖｏｌｕｔｉｏｎｉｎｔｅｇｒａｌｓ.Ｔｈａｎｋｓｔｏｔｈｅｇｏｏｄｃｏｍｐｕｔａｔｉｏｎｅｆｆｉｃｉｅｎｃｙ ,ｔｈｅＦＦＴｔｅｃｈｎｉｑｕｅ ,ｉｎｔｈｅｍｉｄ＿1 980ｓ ,ｂｅｇａｎｔｏｆｉｎｄｗｉｄｅｓｐｒｅａｄｕｓｅｉｎｇｅｏｉｄｄｅｔｅｒｍｉｎａｔｉｏｎ ,ｗｈｅｎｃｏｍｐａｒ…     

Plumb line deflection varied with time obtained by repeated gravimetry

IntroductionPlumb line deflection (PLD) express the incline between the geoid and the surface of ellipsoidal earth, i.e., the deflection of the real plumb line of calculating point to the normal direction of the corresponding point in the ellipsoidal surface. It varied in the range of about 3(~5( generally, and the largest value will be 20(~30( in spatial domain. Plumb line is closely related to spatial distribution of gravity field on the earth surface. PLV of a point on the earth surface c…     

基于Laplace方程的垂线偏差法反演全球海域重力异常

海洋重力场模型反演的质量主要依赖于采用测高数据的精度、空间分辨率和数据分布密集程度。本文联合Geosat GM/ERM、ERS-1 GM/ERM、TOPEX/Poseidon、Envisat、Cryosat-2、Jason-1 ERM/GM和SARAL/AltiKa等多种测高观测数据集,深入比较了多种波形重跟踪算法的效果,回波数据重跟踪处理后的沿轨海面高标准差。统计表明,Sandwell算法优于MLE-4算法、Davis阈值法、改进阈值法和β参数拟合法;基于不同测高数据波形重采样的结果给出了沿轨海面梯度计算中低通滤波的参数选择方法,并采用Sandwell提出的垂线偏差法,反演了全球海域1′×1′的重力场模型。检核表明,反演结果与DTU13和SIO V23.1模型检核的差值均方根分别为3.4、1.8 mGal,与NGDC船测数据的检核精度为4~8 mGal,且本文模型在部分典型海区内精度更优。     

Study on determination of stress level by seismic stress drops and the stress axis deflections before and after large earthquakes

Introduction The study of tectonic stress field, a major branch of the Earth science, plays an important role in geodynamics. The world stress map plan started from 1980s and was leaded by Zoback. Lots of scientists from many countries participated this plan. The plan collected global tectonic stress measurements and research results and established global stress database. The world stress map was edited based on the global stress database. The world stress map reflected feature of global li…     

一种改进的单目视觉桥梁挠度非接触测量方法

本文在现有单目视觉测量方法基础上,提出了一种相机真实俯仰角计算算法,结合图像快速相关匹配与定位算法,可完成桥梁挠度的快速精确测量。通过精度验证试验和挠度对比测试试验,得到了相应的结果,结果表明：①不考虑目标点真实俯仰角变化的测量方法在距离视场中心较远的位置测量结果中误差较大;②单目视觉方法测量结果与角钢作竖直向下的刚体位移保持一致;③单目视觉方法与GPS测量的挠度曲线变化趋势和测量数值基本一致。试验验证了本文方法的可行性及准确性,可为今后基于数字图像相关方法的土木工程变形测量技术研究提供参考。     

利用地面三维激光扫描进行桥梁挠度变形分析

针对常规桥梁挠度变形分析方法仅能获取有限数量离散监测点的几何变形,且存在自动化程度低、效率低、局限性大的问题,本文提出了一种基于点云数据的桥梁挠度变形分析方法。首先通过地面三维激光扫描仪获取桥梁变形体上的点云数据,经过精确配准,获取可靠点云数据。然后利用滑动窗口法得到桥梁线形,并通过两期线形叠差分析得到桥梁挠度变化。最后以跨度40 m+65 m+40 m的连续钢构桥实体工程为试验对象,利用本文方法发现该桥梁存在最小值为8 mm、跨中最大值为17.5 mm、平均值为14.9 mm的挠度变形。结果表明,该方法理论严密、计算效率高、简单实用。研究结果对三维激光扫描技术在变形监测领域的深度应用有重要借鉴意义。     

Test and numerical research on wall deflections induced by pre-excavation dewatering

Numerous studies have been devoted to the performance of excavations and adjacent facilities. In contrast, few studies have focused on retaining wall deflections induced by pre-excavation dewatering. However, considerable inward cantilever deflections were observed for a diaphragm wall in a pre-excavation dewatering test based on a long and narrow metro excavation, and the maximum deflection reached 10 mm (37.6% of the allowable wall deflection for the project). Based on the test results, a three-dimensional soil–fluid coupled finite element model was established and used to study the mechanism of the dewatering-induced diaphragm wall deflections. Numerical results indicated that the diaphragm wall deflection results from three factors: (1) the seepage force around the dewatering well and the soil–wall interaction caused the inward horizontal displacement of the soil inside the excavation; (2) the reduced total earth pressure on the excavated side of the diaphragm wall above approximately 1/2 of the maximum dewatering depth disequilibrated the original earth pressure on both sides of the diaphragm wall; and (3) the different negative friction on the excavated and retained sides of the diaphragm wall led to the rotation of the diaphragm wall into the excavation.     

矿用随钻动态方位伽马仪器的研制与应用

顺煤层瓦斯抽采钻孔是目前最直接最有效的瓦斯治理方法,自然伽马作为含煤地层识别常用的判识依据,可以根据地层放射性判断钻孔轨迹是否在目标层中。但现有的矿用伽马测井仪器只能进行滑动钻进测量,不适用于复合钻进及旋转导向钻进,无法满足伽马动态连续测量的工况。针对以上问题,在分析了煤矿井下随钻测量工况特点和伽马测井原理的基础上,通过低压直流载波双向通信技术进行孔底多扇区方位伽马数据的实时传输;采用屏蔽开窗的结构设计,实现单伽马晶体的8扇区分区测量;基于三轴MEMS加速度传感器和三轴MEMS陀螺仪不同的频率特性,采用互补滤波的动态测量方法,克服了回转钻进过程中振动和旋转对工具面向角测量的影响。通过地面性能测试和井下的工业性试验,验证了仪器在不同放射性地层分界面能正确反映出地层放射性变化规律。试验结果表明,仪器可以满足复合回转定向钻进时的地质导向测量要求,为煤矿井下顺煤层定向钻进提供了技术保障。      

A simple prediction model for wall deflection caused by braced excavation in clays

Deep excavations particularly in deep deposits of soft clay can cause excessive ground movements and result in damage to adjacent buildings. Extensive plane strain finite element analyses considering the small strain effect have been carried out to examine the wall deflections for excavations in soft clay deposits supported by retaining walls and bracing. The excavation geometry, soil strength and stiffness properties, and the wall stiffness were varied to study the wall deflection behavior. Based on these results, a simple Polynomial Regression (PR) model was developed for estimating the maximum wall deflection. Wall deflections computed by this method compare favorably with a number of field and published records.