数字卫星云图估算面雨量的应用试验

使用云分类降水率估计的方法，有静止气象卫星数字云图进行面雨量估算。对１９９３年８月４日华北南部一次降水过程的实测雨量与估算结果的对比分析表明，这种估算方法对雨区的差别有相当高的精度，对雨量的估计有一定的参考价值。     

岩石在动载作用下的破坏与强度

研究岩石的动载性能,在凿岩爆破上有重要意义。分段式霍布金生杆已应用于研究岩石对波动载荷的效应。作者使用改型的霍布金生杆法对岩石试件在动载下的破坏强度作了试验研究。冲击试验台配合微处理机作高速数据显示与处理,借助应力波在弹性杆中的一维理论对数据进行解释。测定了多种岩石静载与动载的强度,并对岩石试件尺寸及加载速率的影响也作了试验。     

改进型反褶积分层解释法——一种应用PC～1500计算机处理γ测井资料的新方法

本文吸取了现行Υ测井资料解释方法的合理部分,提出了改进型反褶积分层解释法。叙述了方法的原理及设置判别因子的原则。作者以PC-1500微机为例给出了改进后的反褶积分层解释法程序流程图。通过对模型钻孔和实际钻孔测井资料的解释,证实了方法的合理性和可行性,克服了目前平均强度法中存在的人为影响,扩大了一般分层解释法的应用范围,该法可在现场及时取得结果,提高了解释速度和质量。     

A FORTRAN Program for tabulating and naming amphibole analyses according to the International Mineralogical Association Scheme

Summary Amphibole analyses input to program AMPHTAB (optionally with H₂O, F, Cl, minor elements and one or both of Fe₂O₃, FeO), are output in conventional column tables, with formula units, complete IMA names, and extensive messages indicating the quality of each analysis. AMPHTAB accepts data-files ranging from a single amphibole analysis to (in principle) unlimited batched data-e.g., multiple analyses from each of numerous probe sections. Options are provided to reallocate total Fe in probe data between Fe³ and Fe², to allow for common analytical problems (e.g., low H₂O values), and to enable the number of oxygens in the formula unit to be either preset or assigned automatically. Results for 57 probe analyses are compared with an unpublished BASIC program, which uses a different Fe-reallocation method. Three-quarters of the IMA names resulting from the two programs are essentially identical, despite somewhat different estimated formula units. The remainder are borderline cases, where incidental changes in formula units effect disproportionate differences in name.

---

Ein FORTRAN-Programm zum tabellieren und benennen von amphibolanalysen entsprechend dem Schema der International Mineralogical Association

Zusammenfassung In das Programm eingegebene Amphibolanalysen (wahlweise mit H₂O, F, Cl, Spurenelementen und Fe₂O₃, und/oder FeO), werden in Form herkömmlicher Spaltentabellen mit den Formeleinheiten, vollständigen IMA-Namen und ausführlichen Bemerkungen bezüglich der Analysenqualität ausgegeben. Das AMPHTAB-Programm verarbeitet Datensätze von einer einzigen Amphibolanalyse bis zu (im Prinzip) unbegrenzten Datenblöcken; z. B. Mehrfachanalysen eines Probenabschnittes von mehreren. Es sind die Möglichkeiten vorgesehen, das Gesamteisen in einer Analyse in die Fe³ und Fe²-Anteile umzurechnen, allgemeine analytische Probleme (z. B. niedrige H₂O-Gehalte) zu lösen und die Anzahl der Sauerstoffatome in der Formeleinheit entweder vorzugeben oder automatisch setzen zu lassen. Die Resultate von 57 Mikrosonden-Analysen sind mit einem unveröffentlichten BASICProgramm, das eine andere Methode zur Aufteilung des Fe-Gehaltes benutzt, verglichen worden. Drei Viertel der von den beiden Programmen vorgeschlagenen Mineralnamen sind identisch, trotz einiger unterschiedlich berechneter Formeleinheiten. Die übrigen 25% sind Grenzfälle, bei denen zufällige Veränderungen in den Formeleinheiten unverhältnismäßige Unterschiede in der Benennung bewirkten.

     

Digital modeling studies for evaluation of hydrogeological characteristics in Shadnagar granite basin,Andhra Pradesh,India

The use of digital models has increased significantly in recent years with the accessibility of fast computing machines. A variable dimensioned digital model was constructed for the Shadnagar granite basin using SPECTRUM-7 micro computer to integrate various hydrogeological characteristics and for their quantitative evaluation. The basin has an areal extent of 437 sq km and is demarcated with clear water divides in all directions. Transmissivity, recharge and discharge at each cell of the basin area were estimated by trial and error simulation of the hydrogeological phenomenon under steady state condition. Dynamic simulation at representative nodes facilitated the estimation of storage coefficient. The capability of the constructed model was established by the conformance of the simulated hydrographs with the actual behaviour of the ground water system. The entire studies ammended the earlier arrived estimates of various input/output hydrogeological parameters and evolved a methodology for efficient processing of aquifer simulation data     

方差分量估计方法在ERS—2卫星精密定轨中的应用

将方差分量估计（VCE）方法应用于ERS－2卫星的精密定轨,用SLR和PRARE资料计算了1998年前3个月的23个长度为5天的弧段（除了调整轨道的时段外,相邻弧段有两天的重叠）,从观测值残差分析和重叠弧段比较两个方面,考察VCE方法对定轨计算的影响,并给出了各组观测值的平均验后均方差,对观测值残差的分析表明,使用VCE方法明显地改善了观测值的拟合程度,但从阿卑（Abbey)标准对观测值残差的检验结果来看,使用VCE方法不能消除轨道中由力学模型和几何模型误差引入的系统差,重叠弧段比较的结果表明：（1）使用VCE方法缩小了重叠弧段的平均距离差,并改善了一部分权段明显不合理的偏离,使最后得到的轨道具有更均匀的精度,（2）相比较而言,VCE方法使相邻弧段靠拢的趋势在轨道切向体现得较为明显,由各组观测值的平均验后方差可见,说单个标准点观测值而言,部分SLR台站的观测资料在定轨计算中占有比其他观测资料更重的地位,纵观全文,使用VCE后得到的观测值的平衡验后均方差来确定资料的双重将比使用均方差更为合理。     

海底X射线荧光探测系统的软件研制

基于Windows98操作平台,结合软件工程的设计原则和面向对象的程序设计方法,用Visual Basic 6.0开发了海底X射线荧光探测系统软件（EDXRF^MS)。该软件能完成数据处理及运算,主要解决谱数据的采集与测量控制、成图和图形处理、X射线荧光谱分析、干扰因素的校正、仪器标定与含量计算等问题。EDXRF^MS软件与海底X射线荧光探测系统的硬件配合,能够进行海上现场多道数据的实时采集,对于海底矿产资源的开发具有一定的实用价值。     

几种辅助设备在强震仪中的应用

本文介绍了GPS、eMODEM、DE-211串口设备服务器等辅助设备在GDQJ-2型固态地震动强度记录仪中的应用，包括各自的功能、作用、实现方法以及和强震仪的接口。     

循环荷载特征对焊接工字形钢支撑低周疲劳性能的影响

通过14根铰支焊接工字形支撑在不同特征的循环轴向位移荷载下的低周疲劳试验，研究了循环轴向位移荷载的位移幅值、平均位移幅值及加载次序等因素对钢支撑低周疲劳及耗能性能的影响。研究发现，对称循环荷载中幅值越小，支撑翼缘局部屈曲发展越晚，其耗能及承载力退化也越平缓。文中提出了支撑在幅值6δ≤Δδ≤12δy的对称循环荷载下的疲劳寿命经验公式。试验表明，循环荷载的位移幅值是支撑疲劳损伤及耗能退化的最主要影响因素，过载峰效应及适当的平均压位移幅值改善了钢支撑低周疲劳及耗能性能。     

Selection of regional historical rainfall time series as input to urban drainage simulations at ungauged locations

It has become established practice during the past 20 years to use high-resolution historical rainfall time series as input to hydrological model packages for detailed simulation of urban drainage systems. However, sufficiently long rain series are rarely available from the exact catchment in question and simulations are hence often based on available rain series from other locations. Extreme rainfall properties of importance to the performance of urban storm drainage systems vary significantly even in regions with only minor physiographic differences. Part of this variation can be explained by regional variations of the mean annual rainfall and the remaining statistical residue can be interpreted as statistical uncertainty.In Denmark, more than 75 high-resolution rain gauges are installed across a total area of 43,000 m. About 40 gauges had sufficiently long records to be included in a comprehensive national investigation where newly developed statistical regionalisation procedures were used to model the regional variation of extreme rainfalls. On this basis, a spreadsheet model was made available for estimation of extreme design rainfalls and the associated uncertainty at any location in the country. Statistics were furthermore computed to classify historical rainfall time series according to the developed regional model, and this makes it possible to assess the uncertainty related with using different historical rain series for simulations at ungauged locations.This research indicates that use of historical point rainfall data at ungauged locations introduces a significant uncertainty that is largely overlooked in today's practice. The engineering recommendation is to select historical rain series based on an evaluation of the local physiographic characteristics (e.g., the mean annual rainfall) and a (pre-defined) desired safety level of the simulations.