采用掏土纠偏及袖阀管加固技术整治铁路桥涵不均匀沉降

某钢筋混凝土箱形铁路桥发生不均匀沉降,经方案优化对比,采用了沉井射水掏土纠偏和塑料袖阀管注浆加固进行综合治理。介绍了其施工工艺和治理效果。     

某倾倒边坡开挖下的变形特征及加固措施分析

以皖南某高速公路一个反倾边坡为例,在详细地质调查基础上分析了边坡以倾倒-滑移为主要特征的倾倒变形力学机理。调查结果显示在边坡原有倾倒变形的基础上,开挖爆破等工程扰动首先使开挖面顶部出现倾倒变形并伴有后缘拉裂隙,同时坡体内部断续结构面逐渐贯通,最下级台阶面出现外鼓等。上述现象的出现显示出边坡具有整体失稳破坏的趋势。在上述地质概念模型基础上,应用离散单元法对边坡变形全过程进行模拟,验证上述变形破坏机理,并揭示了边坡在深度方向上的变形分区现象,即倾倒-折断区、强烈倾倒区、倾倒影响区和正常岩层区。     

湛江海湾大桥塔上锚管定位方法介绍

斜拉桥是一个受力结构复杂、各构件间相互影响较大的超静定结构体,斜拉索锚管的安装定位是其施工的重点与难点之一。本文结合湛江海湾大桥工程实践,介绍一种涉及到大跨度斜拉桥主塔锚管安装定位的原理、放样数据计算的理论、现场安装测量控制和精度等内容的新方法。     

黄河下游引黄区沉沙处理运行方案分析研究*

黄河是多沙性河流,引黄必带进大量泥沙,沉沙池沉粗排细,能有效处理泥沙。当沉沙池淤满,失去自流沉沙作用时,采用"以挖待沉"可以延长灌区运行年限,但没有扬水沉沙方案优越。根据黄河下游地上河的特殊地貌条件,如果能在河漫滩上建沉沙池,可以解决沉沙占地的难题。     

土壤含水量对桉树幼苗生长及生物量分配的影响

以尾叶桉U6无性系为研究材料,盆栽于土壤含水量分别为田间持水量的100%(Ⅰ)、80%(Ⅱ,CK)、60%(Ⅲ)和40%(Ⅳ)条件下30 d,研究不同土壤含水量对桉树幼苗生长和生物量分配的影响.结果表明:不同土壤含水量显著影响桉树幼苗的生长和生物量分配.与对照组相比,60%和40%土壤含水量下桉树幼苗的株高、地径、叶片数、叶面积、根长和侧根数分别减少37.8%、33.6%、52.1%、68.9%、44.0%、37.5%和44.4%、40.4%、60.8%、77.5%、51.6%、48.9% ;总生物量、根、茎、叶生物量分别减少53 .5%、22.4%、57.9%、62.0%和63.9%、26.2%、59.7%、78.9% .100%土壤含水量下上述各项指标值均有所增加,说明桉树幼苗仍有一定增长潜力,然其水分利用效率不高,生产上不实用.水分亏缺使桉树幼苗倾向于将更多的资源分配给根系生长,增大根/茎比,降低其利用价值.     

Investigation on Cutting Stability of Jacket in Decommissioning Process

Jacket cutting operation is one of the most complicated and highest risk operations in the process of decommissioning offshore piled platform, the security and stability of which must be assured. In this paper, the current research on offshore structure removal and jacket cutting is introduced, on the basis of which the types of load along with the load calculation method are determined. The main influences on the stability of a jacket in cutting are analyzed. The experiment test plan is drawn by using orthogonal testing method, and the formula of critical load during the cutting procedure is deduced by differential evolution algorithm. To verify the method and results of this paper, an offshore piled platform to be decommissioned in the South China Sea is taken for an example, and the detailed schedule for jacket cutting is made with the three-dimensional finite element model of the jacket established. The natural frequency, stress, strain and stability of the jacket during cutting process are calculated, which indicates that the results of finite element analysis agree well with that of the deduced formula. The result provides the scientific reference for guaranteeing the safety of jacket in cutting operation.     

组合切削具产生的预破碎区对钻进效果的影响

从组合切削具将在岩石中产生预破碎区的论点出发,通过实验定量研究了预破碎区深度与掏槽刃切入深度的关系,得出了预破碎区有利于降低岩石强度及岩石破碎能耗的结论,并用生产试验结果进行了验证。提出了孕镶金刚石钻头钻进Ⅶ～Ⅷ级硬岩时仍存在预破碎区和切削、微切削破岩方式,以及预破碎区并非越大越好的学术观点。     

Reprint of: Comparison of modern fluid distribution,pressure and flow in sediments associated with anticlines growing in deepwater (Brunei) and continental environments (Iran)

Differences in fluids origin, creation of overpressure and migration are compared for end member Neogene fold and thrust environments: the deepwater region offshore Brunei (shale detachment), and the onshore, arid Central Basin of Iran (salt detachment). Variations in overpressure mechanism arise from a) the availability of water trapped in pore-space during early burial (deepwater marine environment vs arid, continental environment), and b) the depth/temperature at which mechanical compaction becomes a secondary effect and chemical processes start to dominate overpressure development. Chemical reactions associated with smectite rich mud rocks in Iran occur shallow (∼1900 m, smectite to illite transformation) causing load-transfer related (moderate) overpressures, whereas mechanical compaction and inflationary overpressures dominate smectite poor mud rocks offshore Brunei. The basal detachment in deepwater Brunei generally lies below temperatures of about 150 °C, where chemical processes and metagenesis are inferred to drive overpressure development. Overall the deepwater Brunei system is very water rich, and multiple opportunities for overpressure generation and fluid leakage have occurred throughout the growth of the anticlines. The result is a wide variety of fluid migration pathways and structures from deep to shallow levels (particularly mud dykes, sills, laccoliths, volcanoes and pipes, fluid escape pipes, crestal normal faults, thrust faults) and widespread inflationary-type overpressure. In the Central Basin the near surface environment is water limited. Mechanical and chemical compaction led to moderate overpressure development above the Upper Red Formation evaporites. Only below thick Early Miocene evaporites have near lithostatic overpressures developed in carbonates and marls affected by a wide range of overpressure mechanisms. Fluid leakage episodes across the evaporites have either been very few or absent in most areas. Locations where leakage can episodically occur (e.g. detaching thrusts, deep normal faults, salt welds) are sparse. However, in both Iran and Brunei crestal normal faults play an important role in the transmission of fluids in the upper regions of folds.     

基于GA参数辨识的直流伺服电机PID调节器的设计

针对数控火焰切割机自动调高系统的特点和要求,采用遗传算法对其位置调节器PID参数进行全局优化辨识,有效地解决了直流伺服电机的控制精度和快速性的问题.仿真结果表明,与传统的参数辨识法相比,遗传算法参数寻优使自动调高系统的动态性能大幅提高,具有很强的鲁棒性.     

VLISP与VBA结合编程在测量放线工作中的应用

作为CAD二次开发工具中比较易学的编程工具,VBA和VLISP各有优点。VLSIP善于直接使用AutoCAD的命令,而VBA用来开发对话框显得简单得多。文中介绍将它们结合起来并成功开发出一个在CAD电子图上拾取坐标生成两种不同格式的测量放线文件程序的简单实例,提出在进行CAD二次开发的过程中,发挥VBA与VLISP各自的优点,通过"中介"CAD系统变量来传递数据信息的方法,把两种程序结合起来开发CAD应用程序。