Displacement analytical prediction of shallow tunnel based on unified displacement function under slope boundary

For slope condition of ground surface, the asymmetrical deformation about the vertical center line and the horizontal center line of the tunnel cross section can be formed. A unified displacement function expressed by the Fourier series is presented to express the asymmetrical deformation of the tunnel cross section. Five basic deformation modes corresponding to the expansion order 2 are a complete deformation mode to reflect deformation behaviors of the tunnel cross section under slope boundary. Such this complete displacement mode is implemented into the complex variable solution for analytically predicting tunneling-induced ground deformation under slope boundary. All of these analytical solutions are verified by good agreements of the comparison between the analytical solutions and finite element method results. A parameter study is carried out to investigate the influence of deformation modes of the tunnel cross section, geometrical conditions of the tunnel and the slope angle, and “Buoyancy effect” on the displacement field. Finally, the proposed method is consistent with measured data of the Hejie tunnel in China qualitatively. The presented solution can provide a simplified indication for evaluating the ground deformation under slope condition of ground surface.     

Efficient DEM‐based overland flow routing using integrated recursive algorithms

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.     

Revised runoff curve number for runoff prediction in the Loess Plateau of China

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.     

甘肃省第一次全国地理国情普查数据库设计

地理国情普查数据库是地理国情普查成果数据存储、管理和分发应用的基础,为地理国情动态监测提供本底数据库。本文从甘肃省实际情况出发,结合信息化测绘服务体系和"天地图·甘肃"等现有成果,从数据库概念设计、逻辑设计、物理设计、接口设计,以及数据库管理系统和地理国情展示系统等方面进行了详细的设计,为全面开展地理国情普查数据库建设奠定了坚实的基础。     

齐齐哈尔市地理国情分析与表达

以齐齐哈尔市为例,利用地理国情普查数据与统计年鉴数据,构建自然地表指数、地理区位指数、生态覆被指数,对齐齐哈尔市各县、区的地理国情进行综合分析和地图表达。结果表明,齐齐哈尔市的总体条件较好,但区域差异较大,自然地表条件与地理区位条件均以中部的齐齐哈尔市辖区为优,而生态覆被条件则以北部和西部地区为优。     

Matlab在矿区GPS网间接平差中的应用

针对矿区GPS网间接平差,首先,详细地分析了GPS网间接平差原理,按一定格式将GPS网中的观测数据编制成观测文件,其次,按观测文件的格式编制算法将数据读入并存储,然后用间接平差原理处理得到平差结果,最后绘制网形和误差椭圆并生成平差报告,为矿区控制网的建立和矿区生产管理提供了便利。实验验证了本文程序的实用性。     

PEIV模型参数估计新算法

PEIV(Partial Errors-In-Variables)模型是EIV模型的扩展,它能解决系数矩阵含有非随机元素或存在结构特性的问题。针对常规PEIV模型算法的复杂性,提出了一种PEIV模型参数估计的新算法。该算法将系数矩阵含误差的元素看成是一类观测值,与平差模型原观测值构成两类观测值,将PEIV平差模型表示为类似于传统的最小二乘间接平差模型,再通过非线性最小二乘平差理论,推导出了算法的迭代公式和精度评定公式。算法迭代格式与间接平差类似,通过算例验证了算法的可行性和正确性。     

以SRTM-DEM为控制的光学卫星遥感立体影像正射纠正

针对全球测图缺少统一的控制基准的问题,提出了利用SRTM-DEM作为控制基准,对光学卫星遥感影像进行正射纠正的方法。首先,对光学卫星影像构建的立体影像对进行自由网平差并制作DEM;然后,以SRTM-DEM作为控制,将DEM作为单元模型,进行独立模型法DEM区域网平差,获得单元模型的定向参数;最后,改正立体影像的成像几何模型参数,进行正射纠正。选取湖北咸宁和江西某地两个测区的资源三号数据进行试验,试验结果表明,资源三号正视全色影像的平面定向精度由12.93像素提高到6.85像素。     

基于有理多项式模型的GF4卫星区域影像平差处理方法及精度验证

分析了我国首颗静止轨道光学遥感卫星高分四号(GF4)特有的区域成像模式的几何特性,基于静止轨道成像基高比较小的几何特性提出一种利用平均高程面的区域网平差方法。该方法针对GF4卫星影像构建了基于有理多项式模型RFM的区域网平差模型,并在无控制条件下,对GF4卫星区域影像进行区域网平差处理,解决了GF4号区域影像由于定轨误差、定姿误差、大气折光以及镜头畸变等因素导致的拼接精度较低的问题。最后,通过两组真实数据试验对本文方法的精度及有效性进行了验证,同时分析了采用不同的误差补偿模型对于平差结果精度的影响。     

地理国情普查外业调绘核查系统实现

针对传统的基于纸质地图的外业调绘核查工作具有操作复杂、采集数据不精确、作业流程不规范等缺点,该文设计开发了基于iPad的地理国情普查外业调绘核查系统。在内业高精度遥感影像判读的基础上,采用全数字化的外业调绘核查技术,进行地理国情要素移动式、网络化外业调查和验证,快速采集和编辑调查数据,为外业工作提供了一套完整的解决方案。该系统在青岛市崂山区和城阳区的试点中已经得到广泛的应用,较好地验证了移动GIS技术用于外业信息采集的可行性。