非静力滞弹性模式中水平分辨率与垂直分辨率的协调性初探

为了理论上研究非静力滞弹性模式中水平分辨率与垂直分辨率之间的搭配问题，以线性斜压滞弹性方程组为出发方程，导出解析的频散方程、水平群速方程和垂直群速方程，同时在最优三维网格C／CP下进行离散，也导出频散方程、水平群速方程和垂直群速方程，然后用图示的方法，比较了在不同的水平和垂直格距下模拟解析解所产生的误差。结果表明：当垂直格距和水平格距相当时，在C／CP网格上对惯性重力波的频率、水平群速和垂直群速都能较好地模拟，产生的相对误差均在5％以下。     

Angular resolution of terrestrial laser scanners

Knowledge of a laser scanner's spatial resolution is necessary in order to prevent aliasing and estimate the level of detail that can be resolved from a scanned point cloud. Spatial resolution can be decoupled into range and angular components. The latter is the focus of this paper and is governed primarily by sampling interval and laser beamwidth. However, emphasis is often placed on one of these—typically sampling interval—as an indicator of resolution. Since both affect the resolution of a scanned point cloud, consideration of only one factor independent of the other can lead to a misunderstanding of a system's capabilities. This will be demonstrated to be inappropriate except under very specific conditions. A new, more appropriate resolution measure for laser scanners, the effective instantaneous field of view (EIFOV), is proposed. It is derived by modelling the shift variance of the equal angular increment sampling process, laser beamwidth-induced positional uncertainty and observed angle quantisation with ensemble average modulation transfer functions (AMTFs). Several commercially available terrestrial laser scanner systems are modelled and analysed in terms of their angular resolution capabilities using the EIFOV.     

The ‘Stained Glass Procedure’, a new method to compare classification performance of images acquired with different pixel sizes

Objective comparison of classification performance of earth observation images, acquired at different spatial resolutions (e.g. NOAA-AVHRR, IRS-MOS, IRS-WiFS, Landsat-TM, IRS-LISS), is complicated because both class definition and training site selection are hampered by the inherent scale differences. This paper presents a new, generic method to compare the information content of such a set of images, the “Stained Glass Procedure”. It overcomes the stated problems by computing the scale-dependent, internal spectral variation in an image and by using this as an indicator for land cover information. The Stained Glass Procedure creates segments in the images and calculates the internal spectral variation in a high-spatial-resolution image for each segment. For each image from the set the average variance, weighted to area, is calculated. The Stained Glass Procedure can be used to predict the performance of sensors that are not available, yet, or to roughly determine the optimal spatial resolution for the classification of a specific area.The procedure was applied to images with pixel sizes ranging from 23 to 1100 m. Classification detail of Envisat-MERIS (300 m pixel size), not included in the image set, could be predicted accurately using the Stained Glass Procedure.The Stained Glass Procedure applies one procedure to all images, without any subjective decision during the analysis, thus offering a method to compare images with different pixel sizes in terms of classification detail that is truly objective.     

Fine upper crustal structure of Jiashi strong earthquake swarm region in Xinjiang inferred from high resolution seismic refraction profile data

Introduction Jiashi-Artux area in southwest Xinjiang is one of the most active earthquake provinces at pre-sent in Chinese mainland. In the last century, about 3/4 strong earthquakes in Chinese mainland hit this area, and especially from January 21 to April 16 in 1997, 7 earthquakes with the magnituderanging from 6.0 to 6.9 occurred in a very small area of 9 km×18 km near Jiashi (ZHU et al, 1998). It has never taken place before in Chinese mainland that a series of strong earthquakes shoo…     

对企业会计信息失真现象的探讨

针对企业会计信息失真的一些现象，分析了产生原因，阐述了给国家、社会甚至企业自身带来的危害性，并提出了建立惩处机制，监督约束机制，推行会计委派制，完善会计监督体系，提高职业道德等相应的治理建议。     

厚覆盖区金属矿地震方法技术研究

在厚覆盖区,目前的勘查技术在探测深度和精度方面已不能满足深部资源勘查的需求,地震方法可用来弥补目前勘查技术在寻找深部隐伏矿方面的某些不足。由于金属矿区的地质构造十分复杂,金属矿勘查中的地震方法技术是一个十分复杂的课题。这里结合在甘肃金昌铜镍多金属矿区的试验研究,讨论了地震方法技术在厚覆盖区探测隐伏超基性岩体和控矿构造的试验应用效果。     

新疆伽师强震群区基底界面结构特征

用射线分布分析法对伽师强震群区的高分辨折射地震剖面资料进行了更进一步的分析处理， 得到了伽师强震群区更完整的基底界面结构特征. 结果表明，在伽师强震群区地壳上部存在两个明显的结构界面:第一个界面的结构连续、完整，其埋深变化不大， 在2.6～3.3 km之间，为一向天山方向逐渐抬升、 近平直的倾斜界面；第二个界面的埋深变化较大， 在8.5～11.8 km之间，为古老的塔里木盆地结晶基底. 在约37 km桩号附近结晶基底有近2.5 km的深度突变， 推断可能是伽师强震群区超基底断裂所致. 以该断裂为界，结晶基底分为西南、东北两段. 每段内界面的埋深变化不大， 西南段的埋深约11.5 km， 东北段的埋深约为8.5～9.0 km，该段在从西南向东北整体抬升的背景上略有上隆，反映出在塔里木地块西北缘特殊的构造环境下上部地壳的变形特征.      

探地雷达信号特征分析和分辨率提高方法研究

探地雷达信号的奇异点或突变点作为雷达信号的重要特征通常反映介质重要信息,如电性变化界面或异常体等。分析了探地雷达信号在Hilbert变换下,利用小波变换确定探地雷达信号奇异点位置的方法。解决了传统傅立叶变换只能从整体检测探地雷达信号奇异性的局限性。并且由于小波变换良好的时频局部化特性,进一步讨论了其在提高探地雷达信号分辨率的研究中的应用。     

融合形状和光谱的高空间分辨率遥感影像分类

提出了一种像元形状指数及基于形状和光谱特征融合的高（空间）分辨率遥感影像分类方法。形状和光谱是遥感影像纹理的具体表现形式,尤其在高分辨率影像中地物细节得到充分表达,相邻像元的关系及其共同表征的形状特性成为分类的重要因素。本文用像元及其邻域的关系来描述其空间结构,同时为了更全面地利用影像特征,提出了基于支持向量机的形状和光谱融合分类方法。实验证明,该方法计算简便且能有效表达高分辨率影像的地物特征,提高分类精度。