中高层钢筋混凝土异形柱框架结构弹塑性时程分析

用杆模型编制了钢筋混凝土异形柱框架结构的弹塑性时程分析程序FEANT。采用该程序对一中高层大开间钢筋混凝土异形柱框架结构振动台试验模型进行了计算分析，计算值与试验值吻合较好，能满足工程需要。     

圆钢管混凝土压弯构件荷载一位移滞回性能分析

在空钢管中填充混凝土可以避免或延缓钢管过早地发生局部屈曲，并有效地提高构件的延性，从而增强构件的抗震性能，本文在对圆钢管混凝土构件弯矩－曲率关系分析的基础上，分析了圆钢管混凝土压弯构件P－△滞回关系曲线，理论计算结果得到国内外大量结果的验证，基于理论分析模型，分析了各参，如构件轴压比，长细比，截面含钢率和材料强度等因素对圆钢管混凝土压变变构件P－△滞回关系曲线的影响，最后，确定了圆钢管混凝土压弯构件P－△恢复力学模型和延性系数的简化计算方法。     

钻孔压灌粉煤灰混凝土桩复合地基的应用研究

通过工程实例，介绍了钻孔压灌粉煤灰混凝土桩的施工技术，说明了其施工工艺及特点，并利用6组静荷载试验成果，对粉煤灰混凝土桩复合地基的承载力特性进行了分析。     

An experimental investigation of water level effects on the dynamic behaviour of a large arch dam

The need for full‐scale dynamic tests, which are recognized as the most reliable method to evaluate a structure's vibration properties, is increasing as new analysis techniques are developed that take into account the complex interaction phenomenons that occur in dam–reservoir–foundation systems. They are extremely useful to obtain reliable data for the calibration of newly developed numerical methods. The Earthquake Engineering and Structural Dynamics Research Center (CRGP) at the University of Sherbrooke has been developing and applying dynamic testing methods for large structures in the past 10 years. This paper presents the experimental evaluation of the effects of the varying water level on the dynamic response of the 180 m Emosson arch dam in Switzerland. Repeated forced‐vibration tests were carried out on the dam during four different periods of the reservoir's filling cycle during a one‐year span. Acceleration and hydrodynamic pressure frequency responses were obtained at several locations while the dam was subjected to horizontal harmonic loading. The variation of the resonant frequencies as a function of the reservoir level is investigated. A summary of the ongoing numerical correlation phase with a three‐dimensional finite element model for the dam–reservoir–foundation system is also presented. Copyright © 2001 John Wiley & Sons, Ltd.     

Detection of seepage paths in earth dams using self-potential and electrical resistivity methods

Earth and rockfill dams are designed to operate under steady state seepage. Anomalous seepage may be a threat to the integrity of the structure. In spite of advances made in the fields of geotechnical engineering, it is not possible to have 100% leak-proof structure. Any excessive and unplanned seepage may lead to the failure of the dam, especially in unconsolidated or fractured terrains. Geophysical methods play an important role in mapping seepage paths and monitoring the changes of the seepage with time, enabling to plan technically and economically worthwhile remedial measures. In the present paper, utilisation of electrical methods for delineation of seepage zones at two of the four Saddle dams of the Som-Kamla-Amba project, Rajasthan State, India; which is founded on heterogeneous rock mass, is discussed. Electrical resistivity method was used to delineate zones favourable for seepage, whereas, self-potential (SP) method was used to delineate the seepage paths. SP measurements have shown negative anomaly of the order of 10–20 mV in amplitude, indicating low seepage, coinciding with the seepage measurements made by the project authorities.     

白杨河水库砼坝的地震动力分析

水坝抗震能力的评估在新疆具有重要的现实意义．采用有限单元法对白杨河砼坝的动力强度及稳定性进行了计算，结果表明地震时坝的破坏不取决于空库或是满库，而是与它们的周期有关；而且下游坝面遭到破坏的可能性大于上游坝面．在考虑水平及竖向地震荷载作用下，白杨河砼坝满足强度及稳定性要求。     

Modelling of ground motion in the vicinity of massive structures

A two-dimensional elastic Chebyshev spectral element method (SPEM) is used to model the seismic wavefield within a massive structure and in its vicinity. We consider 2-D models where a linear elastic structure, with quadrangular cross-section, resting on an elastic homogeneous half-space, is impinged upon by the waves generated by a surface impulse at some distance. The scattering of Rayleigh waves and the response of the structure are extensively analysed in a parametric way, varying size, mechanical parameters and shape of the load. Some of the models considered are representative of embankments and earth dams. The simulation shows that some models resonate, storing part of the incoming energy. With realistic parameters, the lowest resonance frequency is due to pure shear deformation and is controlled by the shear velocity and height of the load. Flexural modes are excited only at higher frequencies. The acceleration at the top of the structure may be five/seven times higher than at the base, depending on the mass of the structure. The gradual release of trapped energy produces a ground roll lasting several seconds after the wave front has passed. The ground-roll amplitude depends on the sturcture's mass and can be as large as 30% of the peak acceleration. Outside resonance conditions, the ground motion is almost unaffected by the presence of the artefact; the horizontal motion on top of it is nearly twice the motion at ground level. Similar results should be expected when the incident field is an upcoming shear wave. A qualitative discussion shows that the presence of anelastic attenuation in the embankment does not significantly alter the preceding conclusions, unless it is of very low values (e.g. Q < 15).The modelling results that we discuss indicate that the soil-structure interaction may substantially alter the ‘free-field’ ground motion. From a practical point of view, the main conclusions are: (1) careful analysis is necessary when interpreting seismic records collected in the vicinity of large artefacts; (2) seismic hazard at a site may depend on the presence of man-made structures such as embankments, dams, tall and massive buildings.     

基于性能的框架结构抗震设计研究

对国内外基于性能的抗震设计研究成果进行了较系统的综述与分析,研究表明,基于性能的抗震设计能够对结构在未来可能地震作用下的性能进行有效的控制,使破坏和损失限定在可接受的范围内。在此基础上,本文还初步提出了钢筋混凝土框架结构基于延性的抗震设计建议。     

RC框架结构薄弱层的层间位移可靠度水平考察

讨论了钢筋混凝土框架结构层间极限变形角的近似概率特性,考察了大震作用下20余幢钢筋混凝土框架结构薄弱层的层间位移可靠度水平,从而为直接基于位移可靠度的抗震设计中层间目标位移可靠度的确定提供了一定依据。     

Remote structural health monitoring with serially multiplexed fiber optic acoustic emission sensors

Development and testing of a serially multiplexed fiber optic sensor system is described. The sensor differs from conventional fiber optic acoustic systems, as it is capable of sensing AE emissions at several points along the length of a single fiber. Multiplexing provides for single channel detection of cracks and their locations in large structural systems. An algorithm was developed for signal recognition and tagging of the AE waveforms for detection of crack locations. Laboratory experiments on plain concrete beams and post-tensioned FRP tendons were performed to evaluate the crack detection capability of the sensor system. The acoustic emission sensor was able to detect initiation, growth and location of the cracks in concrete as well as in the FRP tendons. The AE system is potentially suitable for applications involving health monitoring of structures following an earthquake Supported by: National Science Foundation, Grant number CMS-9900338