Frequency domain modal analysis of earthquake input energy to highly damped passive control structures

A new complex modal analysis‐based method is developed in the frequency domain for efficient computation of the earthquake input energy to a highly damped linear elastic passive control structure. The input energy to the structure during an earthquake is an important measure of seismic demand. Because of generality and applicability to non‐linear structures, the earthquake input energy has usually been computed in the time domain. It is shown here that the formulation of the earthquake input energy in the frequency domain is essential for deriving a bound on the earthquake input energy for a class of ground motions and for understanding the robustness of passively controlled structures to disturbances with various frequency contents. From the viewpoint of computational efficiency, a modal analysis‐based method is developed. The importance of overdamped modes in the energy computation of specific non‐proportionally damped models is demonstrated by comparing the energy transfer functions and the displacement transfer functions. Through numerical examinations for four recorded ground motions, it is shown that the modal analysis‐based method in the frequency domain is very efficient in the computation of the earthquake input energy. Copyright © 2004 John Wiley & Sons, Ltd.     

Approximate modal decomposition of inelastic dynamic responses of wall buildings

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

一个基于中尺度数值模式的城市分区空气污染预报方法

以深圳市为例，对污染物浓度与各种大气参数的定量联系进行了细致的统计及物理分析，在此基础上建立起分区的城市空气污染潜势等级预报方案。该方案定量考虑了地面和边界层共十几个因子的影响，特别是考虑了地理环境各向异性的效应，将风向作为一个独立的影响因子。方案还针对各污染物稀释特性的差异对不同污染物分别建立潜势预报方案。另外，方案还考虑了相同大气条件下大气对城市不同区域污染物稀释特性可能存在的差异，对不同区域分别建立潜势预报方案。最后用高分辨的中尺度数值模式对大气参数的未来演变作出高时空分辨的预报，进而作出分区、分时段的城市空气污染潜势预报。本方法完全客观定量，物理意义明确，可制作高时间分辨的空气污染潜势预报。     

叠前深度偏移述评

叠前深度偏移是理想的改善复杂地区和强横向速度变化的地震资料成像技术,笔者就4种典型叠前深度偏移方法的理论基础与技术特点,存在的问题及国内外最新进展进行了讨论.     

潜水面变动的空间四面体单元网格自动生成方法

提出了一种由平面三角网格自动生成三维空间四面体单元网格的方法,其基本思路是将含水层平面分成三角形单元网格,将每个三角形沿垂直方向对应一个三棱柱,作为最初的三棱柱;依次将每个三棱柱按照潜水面位置和分层信息划分成不同数目的四面体,从而生成三维空间四面体单元网格。剖分结果表明,此方法综合考虑了潜水面的位置和各含水层顶底板的起伏情况,能够简洁地生成层面起伏的空间四面体网格,特别适用于刻画潜水面波动、含水层顶底板起伏和存在透镜体或岩性缺失等含水层结构复杂的情况下,自动地剖分并生成单元信息,为三维计算的实现奠定了基础。     

SH波对无限介质土中衬砌结构的动应力集中

运用复变函数法和保角映射法对无限介质土中的衬砌结构进行分析.通过引入两个势函数将弹性介质的控制方程解耦成两个Helmholtz方程.利用所得势函数的通解,得到无限土介质和衬砌结构的位移和应力的表达式,利用无限介质与衬砌结构之间的连续性条件和衬砌结构内边界上的边界条件,可确定波函数展开式中的末知系数,并给出动应力集中系数的数值结果.     

北京怀柔长园花岗杂岩体岩石学和构造变形特征及其地质意义

本文描述北京北部燕山地区怀柔长园杂岩体及围岩构造变形迹象 ,并对其成因进行了初步分析。认为中、晚侏罗世时期构造应力场的变化是杂岩体内岩石构造变形的主要因素 ,并以此为根据为该地区燕山期构造 岩浆事件序列的建立提供部分证据。     

Seismic image of the deep crust at the eastern margin of the Alps (Austria): indications for crustal extension in a convergent orogen

A 39-km-long deep seismic reflection profile recorded during two field campaigns in 1996 and 2002 provides a first detailed image of the deep crust at the eastern margin of the Eastern Alps (Austria). The ESE–WNW-trending, low-fold seismic line crosses Austroalpine basement units and extends approximately from 20 km west of the Penninic window group of Rechnitz to 60 km SSE of the Alpine thrust front.The explosive-source seismic data reveals a transparent shallow crust down to 5 km depth, a complexly reflective upper crust and a highly reflective lowermost crust. The upper crust is dominated by three prominent west-dipping packages of high-amplitude subparallel reflections. The upper two of these prominent packages commence at the eastern end of the profile at about 5 and 10 km depth and are interpreted as low-angle normal shear zones related to the Miocene exhumation of the Rechnitz metamorphic core complex. In the western portion of the upper crust, east-dipping and less significant reflections prevail. The lowermost package of these reflections is suggested to represent the overall top of the European crystalline basement.Along the western portion of the line, the lower crust is characterised by a 6–8-km-thick band of high-amplitude reflection lamellae, typically observed in extensional provinces. The Moho can be clearly defined at the base of this band, at approximately 32.5 km depth. Due to insufficient signal penetration, outstanding reflections are missing in the central and eastern portion of the lower crust. We speculate that the result of accompanying gravity measurements and lower crustal sporadic reflections can be interpreted as an indication for a shallower Moho in the east, preferable at about 30.5 km depth.The high reflectivity of the lowermost part of the lower crust and prominent reflection packages in the upper crust, the latter interpreted to represent broad extensional mylonite zones, emphasises the latest extensional processes in accordance with eastward extrusion.     

Geochronology and petrogenesis of the post-orogenic Cu–Ni sulfide-bearing mafic–ultramafic complexes in Jilin Province, NE China

Northeastern (NE) China is a well-documented example of a collisional zone characterized by widespread post-orogenic granites and mafic–ultramafic complexes. Based on a study of the Hongqiling and Piaohechuan Cu–Ni sulfide-bearing mafic–ultramafic complexes in central Jilin province, we present geological, petrological, geochemical and geochronological data which indicates their post-orogenic origin.The Hongqiling complex comprises pyroxenite, olivine websterite, lherzolite, gabbro and leucogabbro. Zircon U–Pb SHRIMP analyses on a leucogabbro of the Hongqiling complex yield a weighted mean ²⁰⁶Pb–²³⁸U age of 216±5 Ma. The Piaohechuan complex is composed of gabbro, pyroxenite and dolerite, exposed as dikes. A plagioclase-bearing pyroxenite has a U–Pb zircon weighted mean ²⁰⁶Pb–²³⁸U age of 217±3 Ma, identical to that of the Hongqiling complex. These ages are coeval with the emplacement of A-type granites in the area, but slightly younger than the regional metamorphism (240 Ma) and syn-orogenic granitic magmatism (246±4 Ma). This suggests that these mafic–ultramafic complexes are post-orogenic in origin. The age data also indicated a short period of lithospheric stabilization of about 30 Ma after cessation of orogenic activity.Geochemical investigation indicates that the primary mafic magma was a lithospheric mantle-derived basalt resulting from the upwelling of asthenosphere due to lithospheric delamination during post-orogenic processes. The magmatic source was contaminated by a small amount of crustal material, and subsequent crystal fractionation resulted in the Cu–Ni mineralization.The widespread occurrence of mafic–ultramafic complexes in the Xing'an–Mongolian Orogenic Belt of NE China and in the Altay–Tianshan–Junggar Orogenic Belt of Northern Xinjiang indicates that mafic intrusions are an important magmatic suite that evolved during post-orogenic processes. Portions of this mafic magma could have underplated the lower crust, and served as the heat source for associated late-stage granitic magmas.     

Geochemistry of Early Cretaceous Alkaline Ultramafic-Mafic Complex from Jasra, Karbi Anglong, Shillong Plateau, Northeastern India

An early Cretaceous alkaline ultramafic-mafic complex is emplaced within the Proterozoic rocks of Shillong plateau at Jasra, Karbi Anglong district of Assam. It is associated to the fracture system of Barapani-Tyrsad shear zone, Kopali faults, and Um Ngot lineaments and mainly comprises pyroxenite, gabbro and nepheline syenite. Few small mafic dykes, emplaced within pyroxenitic and granitic plutons, are also reported. No such dyke is reported to cut gabbros or nepheline syenites. Nepheline syenites occur either in the form of small dykes in pyroxenites or as differentiated bodies in the gabbros. Mineralogical and chemical composition of pyroxenite and gabbro clearly indicate their affinity to the alkaline magmatism. Syenitic samples show miaskitic character (agpaitic index <1), also indicates affinity with alkaline-carbonatite magmatism. Calcite is encountered in a number of pyroxenite samples. From the presented petrological and geochemical data it is difficult to establish any significant genetic relationship through simple differentiation process between these rocks. These data probably suggest that these rocks are derived from a primary carbonatite magma, generated by the low-degree melting of a metasomatized mantle peridotite. CO₂ released by this process also progressively metasomatizes the lherzolite to an alkaline wehrlite and melts derived from alkaline wehrlite (ultrabasic alkaline silicate magma) may be responsible for crystallization of Jasra alkaline ultramafic-mafic rocks.