PM2.5浓度插值中不同空间插值方法对比

针对不同插值方法对于重点大气颗粒物污染源PM_(2.5)大区域内整体分布情况的插值效果和精度存在差异性的问题,该文以石家庄市赵县100个点的PM_(2.5)的数据作为样本点,利用反距离权重法、普通克里格插值法和协同克里格插值法,分别进行PM_(2.5)浓度的空间插值。利用研究区内另外20个PM_(2.5)的数据点进行插值精度的检验。研究结果表明:协同克里格插值的精度最高,但可视化效果不如其他两种方法。     

Deep Penetration of Spudcan Foundation into Double Layered Soils

The spudcan foundation has been widely used in offshore engineering for jack-up figs. However, “punch through”failure often occurs where a stronger soil layer overlays a softer soil layer. In this study, spudcan penetration into double layered soils is investigated numerically. The soil profde is set up as a stronger soil layer overlaying a softer soil layer,with the soil strength ratio ( bottom soil strength / top soil strength) varied from 0.1 to 1.0 ( 1 means uniform soil). The bearing bohaviour is discussed and the beating capacity factors are given for various cases involving different layer thicknesses and different strength ratios of the two clay layers. The development of the plastic zones and the effect of soil selfweight on the beating capacity are also discussed. From this study, it is found that, when a spudcan is distant from the soil layer boundary, the spudean can be analysed with single soil layer data. However, when a spudcan becomes closer to the soil boundary layer, the influence of the lower soft soil layer is significant, and the beating capacity of the spudean decreases. The critical distance is an indication of the occurrence of “punch through” failure. The critical distance between the spudcan and the layer boundary is larger for a rough spudean than the one for a smooth one, and the critical distance decreases with increasing soil strength ratio. The depth of cavity formed during initial spudcan penetration depends on the top layer soil strength, soil strength ratio and unit soil self-weight, and the cavity affects the spudcan beating behaviour as well.     

多点系泊下后弯管波力发电浮体模型试验研究

在大型造波水池中，对最佳后弯管浮体模型3－3，进行了多点系泊下浮体模型试验研究。测定了该模型在不同系泊条件下，气室平均输出气流功率随波周期的变化曲线NA－T，最大锚泊力与入射波高之比随波周期的变化曲线Fmax/Ho-T和最大纵荡距离与入射波高Ho之比随波周期变化曲线Xmax/Ho-T。选定L型链三点系泊为最佳系泊方案。进行了不同喷嘴比的性能试验和不类来波方向的试验，测定了浮体波能转换性能、最大锚泊力、最大纵荡距离随来波方向的变化。     

RS-485总线理论的应用与分析

本文简要介绍了 RS- 4 85理论 ,对在实际应用中的 RS- 4 85网络配置、总线匹配、传输距离、抗干扰措施等做了详细的说明。给出了 1个实际的应用系统 ,阐述了组网时应注意的几个问题     

舰载浅水激光测深系统研究

本文提出了近海浅水区域水深测量的激光双频相位法测量方案，采用声光调制1064nm和532nm光波分别测量水面和水底距离。在实验室进行了该系统的模拟实验，证实了该方案的可行性。     

Estimation of rainfall distribution for the southwestern region of Saudi Arabia

Abstract

Rainfall is the most important input parameter for water resource planning and hydrological studies because flood risk assessment, rainfall harvesting and runoff estimation depend on the rainfall distribution within a region. Due to practical and economic factors, it is not possible to site rainfall stations everywhere, so representative rainfall stations are sited at specific locations. Rainfall distribution is then estimated from such stations. In this study, rainfall distribution in the southwestern region of Saudi Arabia was estimated using kriging, co-kriging and inverse distance weighted (IDW) methods. Historical records of rainfall from 47 stations for the period 1965–2010 and the altitude of these stations were used. The study shows that co-kriging is a better interpolator than the kriging and IDW methods, with a better correlation between actual and estimated monthly average rainfall for the region.     

时空协同的精准农业遥感研究

高分辨率遥感对地观测为我们从空间与时间2个维度客观反演地表格局—过程提供了有效的技术支撑。本文遵循时空协同的研究思路,基于高分辨率遥感影像,开展了农业遥感领域2个典型的问题研究：① 提出了一种基于影像视觉特征的耕地分区分层提取方法,该方法在利用DEM数据进行分区的基础上,根据不同区域内耕地所呈现的几何特征和纹理特征差异,分别设计了不同的耕地提取模型;② 构建了一种地块尺度的作物生长参数反演方法,方法以地块为基本单元,在空间、时间及属性组合约束下进行作物理化参数反演。本研究以贵州省安顺市西秀区和广西扶绥县耕地提取进行了耕地地块提取示范,以扶绥县进行了基于耕地地块和中空间分辨率时间序列遥感数据的甘蔗叶面积指数反演。其中,对于安顺市西秀区的耕地地块提取结果而言,形态精度（IoU）大于0.7的地块超过60%,规则耕地、梯田以及林草地等的类型精度均超过了80%;对于扶绥县甘蔗叶面积指数反演的结果而言,其结果可以较为精确地反映出基地甘蔗与非基地甘蔗的差异,基地甘蔗在品质上要优于非基地甘蔗。西南山地区的耕地形态提取/类型判别和地块甘蔗叶面积指数应用验证均证明了方法的可行性。结果表明,协同使用多源高分辨率数据是实现精准农业遥感研究的有效途径。     

Absolute pollen productivity and pollen–vegetation relationships in northern Finland

Pollen productivity is one of the most critical parameters for pollen–vegetation relationships, and thus for vegetation reconstruction, in either pollen percentages or pollen accumulation rates. We obtain absolute pollen productivity of three major tree types in northern Finland: pine (Pinus sylvestris), spruce (Picea abies) and birch (Betula pubescens ssp. pubescens and B. pubescens ssp. czerepanovii treated as one taxon). Long‐term monitoring records of pollen traps from 15 sites (duration: 5–23 years) and tree volume estimates within a 14 km radius of each trap were compared to estimate pollen productivity (grains m^?3 a^?1) of these trees using a regression method. The slope of the linear relationship between pollen loading and distance‐weighted plant abundance represents pollen productivity. Estimated productivities of pollen (×10⁸ grains m^?3 a^?1) for pine, spruce and birch are 128.7 (SE 31.5), 341.9 (SE 81.3) and 411.4 (SE 307.7), respectively. The birch estimate (P > 0.05) is not as good as the others and should be used with caution. Pollen productivities of pine, spruce and birch in northern Finland are, in general, comparable to those of congeneric species in other regions of Europe and Japan. Although the year‐to‐year variations are significant, our volume‐based estimates of pollen productivity for pine and spruce will be essential for quantitative reconstruction of vegetation in the region. Copyright © 2009 John Wiley & Sons, Ltd.