西藏自治区昂仁县朱诺铜矿地质特征及找矿潜力远景评价

通过典型斑岩型铜矿模式对比,朱诺铜矿含矿斑岩体剥蚀程度为钾化带和黄铁绢英岩化上部,向深部及西部,具有较大的找矿潜力。     

内蒙古胜利煤田共生锗矿的成因地球化学初探

用统计和作图的分析方法,对内蒙古胜利煤田中共生锗矿床的锗品位与挥发分、灰分、硫分的关系进行了研究。结果表明煤中锗品位与挥发分呈正相关、与原煤灰分负相关、与洗煤灰分正相关关系;全区煤属中硫煤,锗品位与原煤和洗煤硫分均呈正相关关系,煤的灰分指数较低(3 579);锗分布不均匀,富锗煤矿明显属于断裂坳陷边缘沉积,锗品位可以在煤层的顶部、中部、底部同时或单个部位呈现高值,大多数煤层中部出现锗高品位值,这有别于以往所报道的锗品位只在煤层顶、底部相对富集的研究结论。认为胜利煤田锗主要与有机质结合;锗的有利聚集条件是水动力较弱、地下水位较低、强还原的停滞沼泽环境;泥炭聚集阶段有机质的吸附作用是锗的主要富集机制。     

相位激电测深在有色金属矿产勘查中的应用

激发极化方法一直是有色金属矿产勘查的主要手段,国内大多使用时间域激发极化方法,相位激发极化法应用较少。相位激电法采用选频测量,抗干扰能力相对较强,近些年在有色金属矿产勘查中一直使用相位激电测深方法,取得了较好的实际应用效果。在使用中,根据实际情况选用偶极-偶极或单极-偶极测量装置,其中偶极-偶极测量装置主要用于普查阶段,单极-偶极装置采用常规高密度电法的布极方式,主要用于详查阶段。这里以具有代表性的高阻高极化、低阻高极化矿体上的应用结果为例,说明偶极-偶极和单极-偶极装置相位激发极化测深的应用效果,以及在实际找矿工作中的作用。     

Calcified roasting-acid leaching process of vanadium from low-grade vanadium-containing stone coal

The low-grade vanadium-containing stone coal used in this experiment was collected from Wuxi Coun- try, Chongqing City, China. The experiment focused on the vanadium recovery from roasted residue through opti- mizing the process conditions of an effective and environmentally-friendly technology, named calcified roast- ing-sulfuric acid leaching technology. By single-factor experiments and orthogonal experiments, the effects of roast- ing temperature, roasting time, sulfuric acid concentration and leaching time on the leaching ratio of vanadium were analyzed. The results showed that the leaching ratio of vanadium reached 85.5% under the proper technological con- ditions of roasting temperature=950℃, roasting time=4 h, 40% concentration of sulfuric acid and leaching time=6 h.     

毕节煤矿区晚二叠世煤层稀土元素的物质来源

对取自毕节地区晚二叠世11个可采煤层的13个样品的稀土元素(REE)的物质来源进行分析。发现:海洋来源对稀土元素的富集作用极其微弱;来自植物成因的物质来源小于1%;煤样中δEu负异常,而陆源岩具有Eu负异常的特点。结合晚二叠世多期喷发的峨眉山玄武岩,因此认为稀土元素的物质来源主要受陆源影响和控制。     

含粗粒金矿样品采集加工与分析研究进展

含粗粒金矿,由于粗粒金的存在使其样品的采集、加工和分析极具挑战性,如何获得具有代表性和均匀性的化学分析样品,并提供准确的分析结果,长期以来一直是该类金矿资源勘查评价急待解决的技术难题。本文对近年来国内外含粗粒金矿样品的采集、加工和分析方法等3方面开展的研究工作及主要成果进行归纳分析,认为:1含粗粒金矿样品的采集是确保样品代表性的首要环节,含粗粒金矿样品分析结果的潜在误差有80%来源于样品采集,因此研究经济、有效的样品采集方法至关重要。2含粗粒金矿样品的加工主要从提高自然金的粉碎度,改进加工流程,选择样品加工设备等方面进行,但查明金的粒度分布及伴生矿物是拟定样品加工流程的关键。3含粗粒金矿样品的分析方法有常规的化学分析方法、批量浸金法和人工重砂加权平均法,相对于复杂的加工流程研究,后者有望成为此类样品经济有效的分析方法。本文指出,含粗粒金矿资源评价质量的误差来源于地质、采样、加工、分析等诸多方面,总体而言应最小化所有阶段误差,应特别重视样品采集方法的研究,确保采集样品的代表性是提高该类金矿资源评价质量的前提。     

煤的变质程度对焦炭结构构造的影响

从宏观和微观两方面对不同变质程度煤所形成焦炭的结构、构造进行了深入研究。从气煤到肥煤阶段（Ｒｏ，ｍ：０．７７％～１．１６％），焦炭气孔壁厚度逐渐增大；进入焦煤阶段（Ｒｏ，ｍ＞１．１６％），焦炭气孔壁厚度降低。气煤、１３焦煤形成的焦炭结构以各向同性体为主，焦煤、肥煤炼出的焦炭以粒状镶嵌结构为主。由气煤和高变质程度的焦煤形成的焦炭，其气孔以微孔和大孔为主，气孔分布标准差Ｄｓ最大；肥煤炼出的焦炭，其气孔分布大小较均一；１３焦煤和低变质程度的焦煤成焦后，气孔分布状况介于上述二者之间     

Valency Study of Vanadium in Stone Coal Ash of Jiangxi Province

Vanadium-bearing stone coal is a new vanadium resource;recovery ofV_2O_5 from the coal has been investigated.It has been found that a satisfactoryextraction of V_2O_5 depends on both the oxidation of V and its reaction with so-dium salt.V in the coal ash of Yushan mainly exists in two oxidation states:98％V(Ⅲ)and2％V(Ⅳ).The distribution of valency of V shows that organicmatter determines V valency at low temperatures,at about470℃,V(Ⅲ)iscompletely oxidized to V(Ⅳ);above500℃,the temperature is the most impor-tant factor for the oxidation of V .At higher temperatures no more V is oxidizedto V(Ⅴ);an equilibrium is established after92％of V is oxidized to V(Ⅴ).The roles of NaCl in the recovery of V_2O_5 from the coal ash were discussed.The best conditions for roasting are temperature750-800℃for1 h.underthe oxidation-chlorination atmosphere.When the ore:NaCl=100:10 by weight,η_roast reaches85.5％.According to the results,a flowsheet for V_2O_5 extrac-tion from coal ash has been proposed.     

断层参数对承压水体上采煤的影响分析

根据流固耦合理论,采用有限元数值模拟的方法,针对承压水体上采煤过程中断层参数(断距、倾角)对煤层、围岩的应力、变形和水压力变化的影响进行了模拟分析,探讨了存在断层时突水的机理和可能的突水点位置,并定量分析了防水煤柱的预留距离。得出以下结论:(1)当存在正断层时,多发生断层破坏型突水,而底板破坏型突水发生的几率较小;(2)突水性质和突水发生位置受断层断距和倾角的影响不大,煤层和采煤工作面附近的底板围岩都可能成为突水涌出点;(3)随着断层断距和倾角的增加,防水煤柱的合理留设距离应随之增大。以上结果可为实际矿井采煤防突水设计提供参考。 更多还原     

K-Ar Ages of Granitic Magmatism and Related Pegmatite Formation at the Umanotani-Shiroyama Mine, Shimane Prefecture, SW Japan and Their Bearings on Cooling History

Abstract. The Umanotani-Shiroyama pegmatite deposits, the largest producer of K-feldspar and quartz in Japan, are of typical granitic pegmatite. Ilmenite-series biotite granite and granite porphyry, hosting the ore deposits, and biotites separated from these rocks yielded K-Ar ages ranging from 89.0 to 81.4 Ma and 95.2 to 93.7 Ma, respectively. Muscovite and K-feldspar separated from the ore zone yielded K-Ar ages with the range of 96.2 to 93.1 Ma and 87.3 to 80.7 Ma, respectively. Muscovites from quartz-muscovite veins in the ore zone and in the granite porphyry yielded K-Ar ages of 90.4 and 76.3 Ma, respectively. K-feldspar is much younger in age than coexisting muscovite. It is noted that the K-Ar ages of biotite separates and the whole-rock ages are identical to those of muscovite and K-feldspar in the ore zone, respectively. These time relations, as well as field occurrence, indicate that the formation of the pegmatite deposits at the Umanotani-Shiroyama mine is closely related in space and time to a series of granitic magmatism of ilmenite-series nature. Using closure temperatures of the K-Ar system for biotite and K-feldspar (microcline), cooling rate of the pegmatite deposits is estimated to be about 82C/m.y. at the beginning, but slowed down to about 15C/m.y. in the later period.