用混合和扩散云室对大气冰核浓度的观测分析

继1963年用混合云室对春季冰核浓度观测之后，1994～1996年，在同季节、同地点用混合和静力扩散云室又做了同步观测。对取得的资料进行整理分析，得出了凝华核浓度在不同天气背景下占总冰核浓度的百分比，两种云室测值的对应关系；分析了扩散云室的容积效应及冰核浓度随气压、能见度等气象因子的变化。     

青海对流云数值模拟分析

利用中国气象科学研究院三维对流云模式和2002年青海省河南县秋季外场试验取得的资料，进行了数值模拟试验。该地区秋季对流云降水主要为冷云降水，暖雨过程不易启动。降雨主要是由于霰落入暖层融化，雨水的蒸发是雨水减少的主要机制。霰在降水的产生中发挥了重要作用。霰的生成又与冰晶密切相关。冰晶是霰的主要来源，而且也是霰生长的主要因素。初始的霰粒主要由冰霰自动转化生成，而较少由雨滴冻结生成。霰胚通过收集过冷云水和冰晶与霰的碰并又促进了霰的进一步生长。冰晶的生成主要是由于自然冰核的核化，因此，自然冰核的数浓度对整个降水过程都有影响。霰是云中过冷水消耗的主要因素。     

北京市春夏季大气气溶胶的单颗粒分析表征

采集了北京市2000年春夏季大气气溶胶样品5个，采用扫描电镜X射线能谱技术分析大气气溶胶单颗粒约2500个。研究结果表明，沙尘期间，矿物尘是最主要的颗粒物种类，非沙尘期间，北京市大气气溶胶中主要检出矿物尘和含硫颗粒物。夏季随着颗粒物污染的加重，含硫颗粒物的数目百分数增加。是北京市大气颗粒物污染的重要特征。重点讨论了Ca-S颗粒、K-S颗粒和Ca-K-S颗粒三类典型含硫颗粒物的化学组成和粒径分布特征。数目可观的Ca-K-S颗粒以及其他硫酸盐颗粒的生成与相对湿度和云量等气象条件相关，这些颗粒物可能是云中过程的产物。减少SO2排放，减少含硫颗粒物，对于控制北京市的大气颗粒物浓度水平具有重要意义。     

青藏高原的水塔功能

青藏高原是维持我国乃至东亚地区生态系统的重要水塔。高原平均海拔在4000m以上,与周边地区形成了巨大的地势差。高原东南部不仅具有丰富的降水,而且在3500m以上以冰川雪被形态储存了巨大的水资源,因此,高原具有重要的水塔功能。基于高原潜在输出总水量和不同海拔区域水体所具有的势能两个方面,建立了高原水塔功能的模型,从而利用GIS方法,通过对我国1∶400万系列图和相关资料的统计分析,计算出高原不同高度带贮存的大气降水、冰川储水量、湖泊水量以及工农业用水量。计算结果表明,青藏高原冰川湖泊的淡水储量达39921×108m3,其中冰川储水量为39228×108m3,可利用湖泊储水量为693×108m3,平均每年由降水获得的水资源量为8495×108m3,高原工农业用水量为129×108m3。因此,高原的输出水量即出境河川径流量为6870×108m3。高原储水主要分布在海拔3000～5000m间,与高原周围相比,平均势差在2000～4000m间,最大的势差达5500m。水体具有巨大的势能,在势能的作用下,自然向周边区域输送汇集,维持着周边地区的生态过程和社会经济活动,因此,青藏高原的水塔功能对于周边地区的生态系统和社会经济系统是极其重要的。     

SAN技术在基础地理信息数据库系统建设中的应用

分析了基础地理信息数据库建设中对存储备份系统的需求和当前存储系统的组成及特点 ,提出了存储局域网在基础地理信息数据库系统建设中的应用方案 ,并介绍了其在陕西省基础地理信息数据库系统建设中的实现情况     

基于OpenGIS规范的地理信息系统组件的内核及功能设计

提出了符合OpenGIS规范的二维地理信息系统组件软件MapManager的设计思想 ,介绍了MapManager的设计过程 ,并对其不足和进一步研究方向进行了讨论。     

面向数字化测绘生产工作流的Web存储系统

讨论了一个面向工作流的项目管理系统中 ,各类计划、实施、监督管理、汇总报表等结构化文档及非结构化文档的存储访问系统的构造方法 ,并设计与实现了一个数字化测绘生产管理系统实例     

闽东北地区夏季对流云特征的初步分析

利用新一代天气雷达资料分析闽东北地区夏季对流云的回波特征。分析表明:多单体合并对流云在生命史、回波高度、强度、尺度等方面都超过了单体对流云,其液态水总量也更大,自然降水条件和人工影响潜力都优于单体对流云,是夏季降水和人工催化的重要云系。分析得到对流云发展的不同阶段、不同高度层辐合辐散特点,为进一步研究夏季对流云结构和降水原理提供科学依据。通过对两个个例的天气形势分析,指出冷空气对对流发展有一定的激发作用。     

Wood storage in a wide mountain river: case study of the Czarny Dunajec,Polish Carpathians

Storage of large woody debris in the wide, mountain, Czarny Dunajec River, southern Poland, was investigated following two floods of June and July 2001 with a seven‐year frequency. Within a reach, to which wood was delivered only by bank erosion and transport from upstream, wood quantities were estimated for eighty‐nine, 100 m long, channel segments grouped into nine sections of similar morphology. Results from regression analysis indicated the quantity of stored wood to be directly related to the length of eroded, wooded banks and river width, and inversely related to unit stream power at the flood peak. The largest quantities of wood (up to 33 t ha^?1) were stored in wide, multi‐thread river sections. Here, the relatively low transporting ability of the river facilitated deposition of transported wood while a considerable length of eroded channel and island banks resulted in a large number of trees delivered from the local riparian forest. In these sections, a few morphological and ecological situations led to the accumulation of especially large quantities of wood within a small river area. Very low amounts of wood were stored in narrow, single‐thread sections of regulated or bedrock channel. High stream power facilitated transport of wood through these sections while the high strength of the banks and low channel sinuosity prevented bank retreat and delivery of trees to the channel. Considerable differences in the character of deposited wood existed between wide, multi‐thread channel sections located at different distances below a narrow, 7 km long, channellized reach of the river. Wood deposited close to the downstream end of the channellized reach was highly disintegrated and structured into jams, whereas further downstream well preserved shrubs and trees prevailed. This apparently reflects differences in the distance of wood transport and shows that in a mountain river wider than the height of trees growing on its banks, wood can be transported long distances along relatively narrow, single‐thread reaches but is preferentially deposited in wide, multi‐thread reaches. Copyright © 2005 John Wiley & Sons, Ltd.     

Under stress permeability determination of the Meuse/Haute-Marne mudstone

In the underground waste isolation projects such as the ANDRA'one in the site of Bure, the transport properties of the surrounding rock mass is of fundamental importance. To measure very low permeability, we use the modified version of the pulse test proposed by Hsieh et al. [Hsieh, P.A., Tracy, J.V., Neuzil, C.E., Bredehoeft, J.D., Silliman, S.E., 1981. A transient laboratory method for determining the hydraulic properties of ‘tight’ rocks — I. Theory. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. Vol. 18, pp. 245-252] which enables the intrinsic permeability, k, and the specific storage coefficient, S_s, of rocks such as mudstone to be characterized. In this paper, the special effort performed on the laboratory apparatus design, to ensure a good sensitivity of the rock response with respect to both parameters, k and S_s, is presented. In addition, two parameters identification procedures are proposed: the graphical method given by Hsieh et al. [Hsieh, P.A., Tracy, J.V., Neuzil, C.E., Bredehoeft, J.D., Silliman, S.E., 1981. A transient laboratory method for determining the hydraulic properties of ‘tight’ rocks — I. Theory. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. Vol. 18, pp. 245-252] and a parameter identification based on the solution of an inverse problem. The efficiency of the apparatus design and the parameters identification procedures is then demonstrated though some pulse tests performed on the Meuse/Haute-Marne mudstone.