Effects of calculation procedure and sampling site on trap method estimates of sediment resuspension in a shallow lake

Resuspension estimates given by two different trap methods in a shallow lake were compared. The sensitivity of the methods to errors in estimates of gross sedimentation and organic fraction of trapped material was explored. The methods were label method, in which resuspension is estimated by determining the organic fraction of surface sediment, suspended seston and trapped material, and SPIM/SPM method, where the relationship between settling particulate inorganic matter (SPIM) and total settling particulate matter (SPM) is used. During the whole 111 day study period, according to the label method, at a sheltered station 1949 g m⁻² dry weight of sediment was resuspended, whereas SPIM/SPM gave an estimate of 1815 g m⁻². The difference in the estimates was probably due to mineralization loss of organic material in the traps during the two week exposure periods. Sensitivity analysis showed that of the two methods, the label method was more sensitive to variations in the organic content of trapped material. At a wind-exposed station, the total amounts of resuspended matter given by the label method and by the SPIM/SPM method were 4966 g m⁻² and 4971 g m⁻², respectively. Due to wind effects, escape of trapped material took place, which caused underestimation of gross sedimentation and compensated the effects of mineralization loss to diminish the difference between the methods. Of the two methods, the SPIM/SPM method seems thus more suitable for lakes, where bacterial activity is high. If cyanobacterial blooms take place, the label method is probably more reliable, providing that the exposure time of sediment traps is kept adequately short.     

Numerical modeling of toxic nonaqueous phase liquid removal from contaminated groundwater systems: mesh effect and discretization error estimation

Numerical modeling has now become an indispensable tool for investigating the fundamental mechanisms of toxic nonaqueous phase liquid (NAPL) removal from contaminated groundwater systems. Because the domain of a contaminated groundwater system may involve irregular shapes in geometry, it is necessary to use general quadrilateral elements, in which two neighbor sides are no longer perpendicular to each other. This can cause numerical errors on the computational simulation results due to mesh discretization effect. After the dimensionless governing equations of NAPL dissolution problems are briefly described, the propagation theory of the mesh discretization error associated with a NAPL dissolution system is first presented for a rectangular domain and then extended to a trapezoidal domain. This leads to the establishment of the finger‐amplitude growing theory that is associated with both the corner effect that takes place just at the entrance of the flow in a trapezoidal domain and the mesh discretization effect that occurs in the whole NAPL dissolution system of the trapezoidal domain. This theory can be used to make the approximate error estimation of the corresponding computational simulation results. The related theoretical analysis and numerical results have demonstrated the following: (1) both the corner effect and the mesh discretization effect can be quantitatively viewed as a kind of small perturbation, which can grow in unstable NAPL dissolution systems, so that they can have some considerable effects on the computational results of such systems; (2) the proposed finger‐amplitude growing theory associated with the corner effect at the entrance of a trapezoidal domain is useful for correctly explaining why the finger at either the top or bottom boundary grows much faster than that within the interior of the trapezoidal domain; (3) the proposed finger‐amplitude growing theory associated with the mesh discretization error in the NAPL dissolution system of a trapezoidal domain can be used for quantitatively assessing the correctness of computational simulations of NAPL dissolution front instability problems in trapezoidal domains, so that we can ensure that the computational simulation results are controlled by the physics of the NAPL dissolution system, rather than by the numerical artifacts. Copyright © 2014 John Wiley & Sons, Ltd.     

Diagnosing snow accumulation errors in a rain‐snow transitional environment with snow board observations

Diagnosing the source of errors in snow models requires intensive observations, a flexible model framework to test competing hypotheses, and a methodology to systematically test the dominant snow processes. We present a novel process‐based approach to diagnose model errors through an example that focuses on snow accumulation processes (precipitation partitioning, new snow density, and snow compaction). Twelve years of meteorological and snow board measurements were used to identify the main source of model error on each snow accumulation day. Results show that modeled values of new snow density were outside observational uncertainties in 52% of days available for evaluation, while precipitation partitioning and compaction were in error 45% and 16% of the time, respectively. Precipitation partitioning errors mattered more for total winter accumulation during the anomalously warm winter of 2014–2015, when a higher fraction of precipitation fell within the temperature range where partition methods had the largest error. These results demonstrate how isolating individual model processes can identify the primary source(s) of model error, which helps prioritize future research.     

地面三维激光扫描仪测量误差检定

在利用三维激光扫描仪进行测量工作前,我们首先应了解其实际测量精度是否符合标称精度,而可靠的评价方式对得到精确的数据结果至关重要。本文利用北京卓立汉光TSA50-C型电动位移台作为评价标准,通过其精确的位移功能,准确地评价了RIGEL VZ-400三维激光扫描仪在测量单点位移时的误差,从而得到了其最佳工作距离。     

GPS精密卫星钟差估计研究

随着精密单点定位技术的发展,对于精确的卫星坐标以及卫星钟差改正精度的要求越来越高,精密卫星星历以及精密卫星钟差的求解成为制约精密单点定位技术发展的瓶颈。本文基于修复周跳的载波相位观测值与相位平滑伪距观测值,采用无电离层延迟星间单差精密卫星钟差估计模型,在先估计出整周模糊度后,进行了精密卫星钟差的估计,并采用与IGS事后精密钟差作二次差的方法进行精度分析,这对于提高精密单点定位精度具有一定的意义。     

基于方差递推法的Kalman滤波在钟差预报中的应用

卫星导航系统中星载原子钟的钟差预报对于导航、定位及授时具有重要的作用。为了提高卫星钟差预报的精度,设计了一种两步确定卫星钟噪声协方差矩阵的Kalman滤波钟差预报模型。该方法首先基于Hadamard总方差确定卫星钟噪声协方差矩阵的初值,然后,使用方差递推法得到滤波过程中卫星钟的噪声协方差矩阵。使用GPS系统的星载铷钟数据进行短期预报,并与常用的二次多项式模型、灰色模型进行对比,结果表明:本文中提出的方法可以实现高精度的卫星钟差预报且预报效果优于两种常用模型,同时,该方法能够在一定程度上弥补预报误差随预报时间增加而不断变大的不足。     

AEKF在星敏感器低频误差补偿中的应用

高分辨率对地观测卫星需要精确的姿态信息来满足后续对地定位等工作,因此姿态确定精度十分重要。星敏感器的低频误差是影响卫星姿态确定精度的重要因素之一,主要是由空间周期性的热环境变化引起的。为进一步提高卫星姿态确定精度,对星敏感器的低频误差产生机理即星敏感器主光轴做周期性扰动进行了分析,设计了星敏感器低频误差补偿方案,建立了考虑星敏感器低频误差在内的组合定姿模型,利用拓维卡尔曼滤波(AEKF)对低频误差进行补偿,并引入RTS平滑滤波进一步提高姿态确定精度。仿真实验表明,设计的星敏感器低频误差补偿方案能有效对其进行补偿,提高卫星姿态确定精度。     

Possible sources of forecast errors generated by the global/regional assimilation and prediction system for landfalling tropical cyclones. Part I: Initial uncertainties

This paper investigates the possible sources of errors associated with tropical cyclone (TC) tracks forecasted using the Global/Regional Assimilation and Prediction System (GRAPES). The GRAPES forecasts were made for 16 landfalling TCs in the western North Pacific basin during the 2008 and 2009 seasons, with a forecast length of 72 hours, and using the default initial conditions (“initials”, hereafter), which are from the NCEP-FNL dataset, as well as ECMWF initials. The forecasts are compared with ECMWF forecasts. The results show that in most TCs, the GRAPES forecasts are improved when using the ECMWF initials compared with the default initials. Compared with the ECMWF initials, the default initials produce lower intensity TCs and a lower intensity subtropical high, but a higher intensity South Asia high and monsoon trough, as well as a higher temperature but lower specific humidity at the TC center. Replacement of the geopotential height and wind fields with the ECMWF initials in and around the TC center at the initial time was found to be the most efficient way to improve the forecasts. In addition, TCs that showed the greatest improvement in forecast accuracy usually had the largest initial uncertainties in TC intensity and were usually in the intensifying phase. The results demonstrate the importance of the initial intensity for TC track forecasts made using GRAPES, and indicate the model is better in describing the intensifying phase than the decaying phase of TCs. Finally, the limit of the improvement indicates that the model error associated with GRAPES forecasts may be the main cause of poor forecasts of landfalling TCs. Thus, further examinations of the model errors are required.     

变分同化框架通过背景误差协方差构建动力平衡约束的研究进展

通过背景误差协方差构建动力平衡约束是变分同化框架设计的重要环节。它不仅帮助实现变量间的协同分析,提高观测使用效率,还能改善变分极小化问题的性状。本文在系统梳理通过背景误差协方差引入动力平衡约束的方式、流程的基础上,对求解目前全球和有限区域变分同化系统普遍采用的准地转平衡和静力平衡约束的共性问题和存在的不足作了归纳总结。分析了求解准地转平衡约束的三类方案:动力平衡方程方案、统计方案和动力-统计相结合方案的优缺点。对照比较了不同垂直离散方案下求解静力平衡约束时遇到的欠定问题的表现以及解决途径。最后,展望了基于背景误差协方差构建动力平衡约束在赤道等特殊地区、高分辨率同化系统、以及集合-变分混合同化系统发展中面临的挑战和机遇。     

多普勒雷达观测在北京7.21暴雨数值模拟中的三维变分同化研究

基于背景误差的特征长度理论,研究调整背景误差水平分辨率对多普勒雷达资料三维变分同化的影响。首先利用NMC方法针对暴雨落区统计不同水平分辨率的背景误差协方差,分析两种不同分辨率的背景误差的结构特征,研究水平分辨率对背景误差特征长度的影响。将其应用于雷达资料同化中,研究背景误差水平分辨率变化对雷达资料同化的影响。结果表明:背景误差水平分辨率由27 km提高到3 km时,在大气低层体现出更细致的动力场信息,其动力场水平特征长度按水平分辨率的二次根递减,而温度场与水汽场水平特征长度变化不明显。在将不同分辨率的背景误差用于三维变分同化时,更高分辨率的背景误差可以在分析场增量中体现更细致的中小尺度信息,能够明显改善雷达径向速度资料同化效果,并在随后的暴雨数值模拟中雨量及其分布形态更接近实况。