A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings

An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429. Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at each floor level. These ‘modal’ demands due to the first few terms of the modal expansion are then combined by the CQC rule to obtain an estimate of the total seismic demand for inelastic systems. When applied to elastic systems, the MPA procedure is equivalent to standard response spectrum analysis (RSA). The MPA estimates of seismic demand for torsionally‐stiff and torsionally‐flexible unsymmetric systems are shown to be similarly accurate as they are for the symmetric building; however, the results deteriorate for a torsionally‐similarly‐stiff unsymmetric‐plan system and the ground motion considered because (a) elastic modes are strongly coupled, and (b) roof displacement is underestimated by the CQC modal combination rule (which would also limit accuracy of RSA for linearly elastic systems). Copyright © 2004 John Wiley & Sons, Ltd.     

A Model-Based Approach to Semi-Automated Reconstruction of Buildings from Aerial Images

Automated reconstruction of building objects from aerial images is a complex problem due to the diversity of buildings as well as noise and low contrast of images, which are the results of distant photography, atmospheric effects and poor illumination. In this paper, a semi-automated approach to the reconstruction of parametric building models from aerial images is presented, which works with line segments extracted from the image. The model is selected interactively from a library of parametric models. A perceptual grouping technique is used to select the most significant image lines in terms of relations such as proximity and parallelism. Model lines are searched for the same relations as in the grouped image lines, and the corresponding lines undergo a matching procedure, which determines whether or not a match can be found between the given model and image lines. An experiment with aerial images of flat-roof and gable-roof buildings is shown and its results indicate the robustness and efficiency of the proposed approach.     

2003年12月1日新疆昭苏6.1级地震烈度与房屋震害

介绍了2003年12月1日新疆昭苏6.1级地震的现场考察结果.该地震宏观震中位于受灾最重的兵团农四师76团11连西侧,极震区烈度为Ⅷ度;圈定出Ⅷ度、Ⅶ度和Ⅵ度3条等震线.此次考察还着重考察了震区各类典型建筑的受损特征,对受损原因作了初步分析,所取得的经验可供类似地区抗震设防和民房改造工作参考.     

Identification of structural parameters of multistorey shear buildings from modal data

A procedure has been presented in this paper to identify the structural parameters, viz. mass and stiffness matrices, from modal test data for multistorey shear buildings. The first two orders of modal data have been used by other researchers to estimate the global matrices where they depend only on measurable points which are less than the total number of structural degrees of freedom. The above method has been refined here by using Holzer criteria along with other numerical methods to estimate the global mass and stiffness matrices of the structure. This shows the methodology to be more efficient and accurate. The reliability of the procedure has been shown by examples of multistorey buildings. Copyright © 2004 John Wiley & Sons, Ltd.     

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.     

Tensionless–frictionless interaction of flexible annular foundation with a transversely isotropic multi‐layered half‐space

A transversely isotropic multi‐layered half‐space, with axis of material symmetry perpendicular to the free surface, supports a flexible either annular or solid circle foundation. The contact area of the foundation and the half‐space is considered to be both frictionless and tensionless. The foundation is assumed to be affected by a vertical static axisymmetric load. Detailed analysis of the interaction of these two systems with different thickness of layers is the target of this paper. With the use of ring load Green's functions for both the foundation and the continuum half‐space, an integral equation accompanied with some inequalities is introduced to model the complex BVP. With the incorporation of ring‐shape FEM, we are capable of capturing both regular and singular solution smoothly. The validity of the combination of the analytical and numerical method is proved with comparing the results of this paper with a number of benchmark cases of both linear and nonlinear interaction of circular and annular foundation with half‐space. Some new illustrations are presented to portray the aspect of the anisotropy and layering of the half‐space. Copyright © 2014 John Wiley & Sons, Ltd.     

Frequency analysis of nonstationary annual maximum flood series using the time‐varying two‐component mixture distributions

The most popular practice for analysing nonstationarity of flood series is to use a fixed single‐type probability distribution incorporated with the time‐varying moments. However, the type of probability distribution could be both complex because of distinct flood populations and time‐varying under changing environments. To allow the investigation of this complex nature, the time‐varying two‐component mixture distributions (TTMD) method is proposed in this study by considering the time variations of not only the moments of its component distributions but also the weighting coefficients. Having identified the existence of mixed flood populations based on circular statistics, the proposed TTMD was applied to model the annual maximum flood series of two stations in the Weihe River basin, with the model parameters calibrated by the meta‐heuristic maximum likelihood method. The performance of TTMD was evaluated by different diagnostic plots and indexes and compared with stationary single‐type distributions, stationary mixture distributions and time‐varying single‐type distributions. The results highlighted the advantages of TTMD with physically‐based covariates for both stations. Besides, the optimal TTMD models were considered to be capable of settling the issue of nonstationarity and capturing the mixed flood populations satisfactorily. Copyright © 2016 John Wiley & Sons, Ltd.     

Slope stability analysis using evolutionary optimization techniques

Slope stability optimization, in the presence of a band of a weak layer between two strong layers, is accounted for in complicated geotechnical problems. Classical optimization algorithms are not suitable for solving such problems as they need a proper preliminary solution to converge to a valid result. Therefore, it is necessary to find a proper algorithm which is capable of finding the best global solution. Recently a lot of metaheuristic algorithms have been proposed which are able to evade local minima effectively. In this study four evolutionary algorithms, including well‐known and recent ones, such as genetic algorithm, differential evolution, evolutionary strategy and biogeography‐based optimization (BBO), are applied in slope stability analysis and their efficiencies are explored by three benchmark case studies. Result show BBO is the most efficient among these evolutionary algorithms and other proposed algorithms applied to this problem. Copyright © 2016 John Wiley & Sons, Ltd.     

超高层建筑GPS实时动态监测技术研究

在特高等级精密工程的测量范畴内,实现对超高层建筑的施工监测是一个非常重要的工作内容,GPS实时动态监测技术在监测中发挥着不可忽视的作用。本文首先对GPS监测技术做简要阐述,并分析了超高层建筑的特点;然后指出了GPS监测技术在施工监测中所发挥的作用;最后结合案例,具体分析了GPS监测技术在超高层建筑中的应用,以期为超高层建筑GPS实时动态监测技术的相关研究提供部分参考意见。