航空重力测量数学模型及其测量精度分析

基于数学和分析力学角度分别推导了航空矢量重力测量的数学模型,得到了一致的模型公式;给出了矢量模型的3个分量形式,其中垂直方向的分量就是标量重力测量的数学模型;简要介绍了我国研制成功的航空标量重力测量系统CHAGS的数据处理的过程,分析了标量重力测量中测线交叉点和重复测线的重力异常的精度;根据实测数据计算的结果表明:测线交叉点重力异常不符值的标准差约为5×10-5ms-2左右,重复测线的内符合精度优于5×10-5ms-2,达到了预期的要求。     

数字管网连通分析的淘汰算法与实现

本文从图论的观点出发,分析了数字化市政管网的构成和连通的特点,探索出数字化管网线路连通性分析的规律,提出了逐步淘汰算法进行连通性分析的方法。给出了基于mapbsic的实现这种算法的关键语句和注意问题。     

对我国西南地区河谷深厚覆盖层成因机理的新认识

近年来,在我国水能资源开发过程中,发现各河流现代河床以下普遍堆积厚达数十米甚至上百米的松散堆积物。河谷深厚覆盖层的存在,不仅严重制约了工程坝址的选择,影响相关流域水电资源的开发利用,也给坝工设计带来巨大的困难。由于深厚覆盖层埋藏于现代河床之下,其形成年代一般先于一二级阶地,有悖于河流发育演化的常理,其成因一直令人费解。首次将河谷深切和深厚堆积事件与全球气候变化、海平面升降运动、地壳运动等有机地联系起来,并提出冰期、间冰期全球海平面大幅度升降,是导致河流深切成谷并形成深厚堆积的主要原因的新观点。在此基础上,引入层序地层学原理,从理论上较好地解释了全球气候变化导致海平面和河流侵蚀基准面大幅变化,并产生河谷深切和深厚堆积的原因和过程。最后,进一步将沿河大型古滑坡的孕育和发生与河谷深切事件相联系,提出沿河大型古滑坡是在河谷深切期因前缘临空较好而形成的新观点,从而对沿河古滑坡前缘剪出口高程往往低于现代河床数十米的原因给出了较合理的解释。     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

区域似大地水准面确定的最小二乘支持向量机方法

支持向量机(SVM)是近年来发展起来的机器学习的新方法,它较好地解决小样本、非线性、高维数、局部极小点等实际问题.文中研究支持向量机的拓展算法--最小二乘支持向量机(LSSVM),并将其应用于确定大面积复杂似大地水准面.通过工程实例并与神经网络模型和二次曲面多项式拟合模型相比较,验证确定区域似大地水准面的LSSVM方法的有效性.     

球面线要素的多分辨率实时简化方法

在分析球面3维数据可视化特点的基础上,提出了视点相关的球面矢量数据LOD简化方法,基本原理是：以视点为基础在屏幕空间获取投影误差,反投影到模型空间得到动态简化阈值,并结合Douglas—Peucker算法,对矢量数据进行多分辨率实时简化表达。最后,开发实验系统并对相关方法进行了验证。结果表明：在不影响球面图形可视化效果下,数据量减少了约4-5倍,有效地提高了图形渲染速度和效率。     

Modelling Positional Uncertainty of Line Features by Accounting for Stochastic Deviations from Straight Line Segments

The assessment of positional uncertainty in line and area features is often based on uncertainty in the coordinates of their elementary vertices which are assumed to be connected by straight lines. Such an approach disregards uncertainty caused by sampling and approximation of a curvilinear feature by a sequence of straight line segments. In this article, a method is proposed that also allows for the latter type of uncertainty by modelling random rectangular deviations from the conventional straight line segments. Using the model on a dense network of sub‐vertices, the contribution of uncertainty due to approximation is emphasised; the sampling effect can be assessed by applying it on a small set of randomly inserted sub‐vertices. A case study demonstrates a feasible way of parameterisation based on assumptions of joint normal distributions for positional errors of the vertices and the rectangular deviations and a uniform distribution of missed sub‐vertices along line segments. Depending on the magnitudes of the different sources of uncertainty, not accounting for potential deviations from straight line segments may drastically underestimate the positional uncertainty of line features.     

Time-dependent stress change during failure of rocks

The energy balance of a solid subject to fracture has been explored using heat and mass transfer equations with regard to the volumetric and superficial components. In the suggested model, brittle fracture of a cracked solid considered as a heterogeneous two-phase medium is described by an equation analogous to the Griffith’s criterion for propagation of a single crack. The derived equation is used, together with estimates of relative change in specific interface area, to study the respective change of free strain energy and pressure in rocks associated with failure.     

A spectrophotometric measurement of soil cation exchange capacity based on cobaltihexamine chloride absorbance

Among numerous methods for cation exchange capacity (CEC) determination for soils and sediments, the cobaltihexamine chloride method is frequently used due to its ability to measure CEC at soil pH. After exchange with Co(NH₃)₆³⁺ ions, CEC is estimated via the measurement of the Co remaining in solution. The modified method proposed allows a more rapid determination of CEC based on the measurement of the absorbance at 472 nm of the cobaltihexamine chloride solution before and after exchange. This method has been applied to various soil's horizons from four sites, selected to cover a wide range of CEC and pH values. The model obtained allows one to calculate CEC from absorbance at 472 nm with 95% confidence intervals. As CEC is of relevant meaning in agronomical and environmental purposes, and more recently in ecotoxicological studies, this modified method can be proposed as a rapid test for CEC evaluation.     

Climate changing characteristics of Zhangye City in Heihe River basin during 1968–2005

At present, researches on climate change of the Heihe River basin mainly focus on the relationship between basin climate change and regional water resources, regional desertification and dynamic climatic seasons of sandstorm, but less on climate change of oasis region, where there are more intense and frequent human activities. Based on data of precipitation, temperature, strong wind and dust events frequencies obtained from the six meteorological stations of Zhangye region in Heihe River basin, the features of climate change during 1968–2005 were carefully studied. Results show that the regional temperature rise rate exceeded the average level of China. The annual precipitation changed a little, but the precipitation had a slowly increasing trend in spring and winter. Frequencies of strong wind and sandstorm days show obviously descending trends, which had a close correlation with the regional temperature rise and the precipitation increase in spring and winter. Meanwhile, further human economic activities and exploitations to the oasis in the inland valley of arid regions also affected the climate change of this region, which has a sensitive and fragile eco-environment. __________ Translated from Journal of Desert Research, 2007, 27(6): 1048–1054 [译自: 中国沙漠]