Dynamic interaction of bridge–train system under non‐uniform seismic ground motion

The probability that an earthquake occurs when a train is running over a bridge in earthquake‐prone regions is much higher than before, for high‐speed railway lines are rapidly developed to connect major cities worldwide. This paper presents a finite element method‐based framework for dynamic analysis of coupled bridge–train systems under non‐uniform seismic ground motion, in which rail–wheel interactions and possible separations between wheels and rails are taken into consideration. The governing equations of motion of the coupled bridge–train system are established in an absolute coordinate system. Without considering the decomposition of seismic responses into pseudo‐static and inertia‐dynamic components, the equations of motion of the coupled system are formed in terms of displacement seismic ground motions. The mode superposition method is applied to the bridge structure to make the problem manageable while the Newmark‐β method with an iterative computation scheme is used to find the best solution for the problem concerned. Eight high‐speed trains running over a multi‐span steel truss‐arch bridge subject to earthquakes are taken as a case study. The results from the case study demonstrate that the spatial variation of seismic ground motion affects dynamic responses of the bridge–train system. The ignorance of pseudo‐static component when using acceleration seismic ground motions as input may underestimate seismic responses of the bridge–train system. The probability of separation between wheels and rails becomes higher with increasing train speed. Copyright © 2011 John Wiley & Sons, Ltd.     

铁路连续梁拱组合桥基于摩擦摆支座的减隔震研究

研究了铁路连续梁拱组合体系桥梁的支座减、隔震设计.针对该桥梁的特点提出了摩擦摆支座减、隔震设计的原则与方法;建立全桥计算模型,采用非线性时程分析方法重点分析了摩擦摆支座的减、隔震效果.结果表明,采用摩擦摆支座可以显著地减小结构顺桥向的最大地震弯矩及拱顶变形,横桥向的减、隔震效果受输入地震动的影响很大.     

扩频微波网桥在新疆测震网络中的应用

以频率为2.4 GHz和5.8 GHz设备为例,对扩频微波网桥在新疆测震网络中的应用范围进行阐述;根据实际工作中无线网桥的安装架设经验,对在不同条件、不同环境下可能出现的问题提出相应解决方案.     

Dynamic performance analysis of a seismically isolated bridge under braking force

In order to study the dynamic performance of seismically isolated bridges under the most unfavorable loads in the longitudinal direction,a dynamic equation for vehicle braking in the longitudinal direction is established.A four or fiveorder Runge-Kutta method is adopted to obtain the time-history response of a wheel set under braking force.The quadratic discretization method is then used to transform this time-history into a braking and bending force time-history of a structural fixed node,and a dynamic response analysis of the seismically isolated bridge under the vehicle’s braking force is carried out using ANSYS,a universal finite element analysis software.According to the results,seismic isolation design results in a more rational distribution of braking force among piers;the influence of the initial braking velocity on the vehicle braking force is negligible;the location where the first wheel set leaves the bridge is the most unfavorable parking location;a seismic isolation bridge bearing constructed according to typical design methods enters into a yield stage under the braking force, while the shearing force at the bottom of the pier declines as the isolation period is extended;the design requirements can be met when the yield displacement of the seismic isolation bearing is less than 5 mm and the yield strength is greater than the braking force.     

Experimental study of a highway bridge with shape memory alloy restrainers focusing on the mitigation of unseating and pounding

This paper presents an experimental study to investigate the performance of shape memory alloy(SMA) restrainers for mitigating the pounding and unseating of highway bridges when subjected to seismic excitations.Mechanical property tests of the SMA wire used in the restrainers are conducted first to understand the pseudo-elastic characteristics of the material.Then,a series of shaking table tests are carried out on a highway bridge model.The structural responses of the highway bridge model equipped with SMA restrainers,installed in the form of deck-deck and deck-pile connections,are analyzed and compared with the uncontrolled structures.The test results of this study indicate that the SMA restrainers are not only effective in preventing unseating but also in suppressing the seismic-induced pounding of the highway bridge model used in this study.     

Towards multiple hazard resilient bridges: a methodology for modeling frequent and infrequent time-varying loads Part I, Comprehensive reliability and partial failure probabilities

The current AASHTO load and resistance factor design (LRFD) guidelines are formulated based on bridge reliability,which interprets traditional design safety factors into more rigorously deduced factors based on the theory of probability.This is a major advancement in bridge design specifications.However,LRFD is only calibrated for dead and live loads.In cases when extreme loads are significant,they need to be individually assessed.Combining regular loads with extreme loads has been a major challenge,mainly because the extreme loads are time variables and cannot be directly combined with time invariant loads to formulate the probability of structural failure.To overcome these difficulties,this paper suggests a methodology of comprehensive reliability,by introducing the concept of partial failure probability to separate the loads so that each individual load combination under a certain condition can be approximated as time invariant.Based on these conditions,the extreme loads (also referred to as multiple hazard or MH loads) can be broken down into single effects.In Part Ⅱ of this paper,a further breakdown of these conditional occurrence probabilities into pure conditions is discussed by using a live truck and earthquake loads on a bridge as an example.There are three major steps in establishing load factors from MH load distributions:(1) formulate the failure probabilities;(2) normalize various load distributions;and (3) establish design limit state equations.This paper describes the formulation of the failure probabilities of single and combined loads.     

中日规范中关于液化和侧向扩流场地桥梁桩基抗震设计考虑之比较

评述了我国液化场地和侧向扩流场地桥梁桩基抗震设计规范。总结了中日两国液化场地和侧向扩流场地桥梁桩基的抗震设计方法与技术细节,阐述了日本规范中液化场地和侧向扩流场地桥梁桩基抗震设计中的液化地基土反力折减系数的确定方法,以及土体液化侧向扩流对桩作用力的计算模式。指出我国规范中在液化和侧向扩流场地桩的抗震分析方法、不同土层分界处桩的抗震措施、桩的竖向承载力及桩的屈曲稳定性分析等方面存在的主要问题,据此给出了亟待改进的初步建议。这对我国桥梁工程的抗震安全性具有重要意义,可供我国工程技术人员参考借鉴。     

汶川大地震简支梁桥落梁震害与设计对策

总结了5.12汶川大地震中简支梁桥落梁震害及主要影响因素,发现除地震山体滑坡等地质灾害外,断层地表破裂、近断层地震动效应、桥台胸墙冲切破坏、防落梁构造措施单一及桥梁体型复杂等因素都是引起简支梁桥落梁震害的重要原因。提出了简支梁桥防落梁设计的基本理念及相关技术方案要点为允许墩梁间发生滑移,以降低桥墩承受的地震惯性力,以及盖梁提供允许的最大滑移长度及支座支承宽度,再辅助挡块或拉索限位器等共同防止落梁发生。最后结合现行规范,以拉索限位器为例给出了简支梁桥防落梁设计方法。     

曲率半径对大温差地区小半径曲线梁桥地震响应影响分析

为研究曲率半径和近断层脉冲效应对大温差地区小半径曲线梁桥在地震作用下的动力响应和碰撞效应的影响规律,以某大温差地区曲线梁桥为研究对象,建立不同曲率半径的全桥非线性有限元模型,考虑温度变化对支座性能和伸缩缝间距的影响,开展桥梁地震响应分析.结果表明:随着主梁曲率半径增大,墩底内力响应逐渐增加,邻梁间碰撞效应逐渐增强;温度...     

相邻梁段周期比对伸缩缝处的碰撞响应分析

针对相邻两联连续梁桥伸缩缝处的碰撞现象,基于其周期不一致而表现出的动力差异性,进行动力时程分析,采用直接积分法研究了地震作用下相邻联的非同向振动和伸缩缝处的碰撞响应。分析结果表明:不同周期比的相邻梁体,在地震动作用下产生的碰撞响应不同,加速度峰值小持续时间长的地震波对伸缩缝处的碰撞响应较小;碰撞对严重不同向振动的相邻两联(T2/T10.5)的地震响应影响很大,随着相邻两联周期比的增大,碰撞对结构地震反应影响逐渐减小。