整体平差方法在CCD天体测量中的应用

回顾了基于底片重叠观测的整体平差方法的发展历史和应用概况，分析了该方法应用于底片资料处理没有取得预期效果的原因，介绍了小视场CCD重叠观测的整体平差研究进展．分析与实测资料归算表明，整体平差方法可以在CCD资料处理中充分发挥作用，在保证长焦距、小底片比例尺的同时，通过对CCD重叠观测的整体平差(相当于扩大观测视场)，可覆盖更多的参考星，进而达到改善局部参考架、提高归算结果精度的目的。     

四川甘孜生康剪切混杂岩带物质组成、变形特征及演化历史

甘孜生康剪切混杂岩带,它初始发育在陆棚与大陆基之间,是“再生”小洋盆关闭、俯冲－碰撞乃至斜冲剪切、左行走滑综合作用的产物。带内由不同岩性,不同层位,不同时代的构造岩块与遭受强烈剪切变形的粉砂岩、板岩“基质”组合而成。宏观上,无层无序,块体内有序,是造山带特有的非史密斯地层体。     

基于Zernike矩的多时相遥感影像匹配方法研究

针对参与变化检测影像的特点,归纳多时相影像匹配方法应满足的条件,提出了一种基于Zernike矩的匹配策略。在进行多时相影像匹配时,该方法对灰度的线性变化不敏感,而且可以匹配存在较大旋转角度的影像。试验表明,该匹配策略具有较高的匹配正确率。     

Aseismio fault slip and block deformation in North China

In North China, the tectonic fault-block system enables us to use the Discontinuous Deformation Analysis (DDA) method to simulate the long-term cross-fault survey and other geodetic data related to aseismic tectonic deformation. By the simulation we have found that: (1) Slips on faults with different orientation are generally in agreement with the ENE-WSW tectonic stress field, but the slip pattern of faulting can vary from nearly orthogonal, to pure shear along the strike of the faults, this pattern cannot be explained by simple geometric relation between the strike of the fault and the direction of the tectonic shortening. This phenomenon has been observed at many sites of cross-fault geodetic surveys, and might be caused by the interactions between different blocks and faults. (2) According to the DDA model, if the average aseismic slip rate along major active faults is at the order of several tenths of millimeter per year as observed by the cross-fault geodetic surveys, the typical strain rate inside a block is at the order of 10^–8 year^–1 or less, so that the rate of 10^–6 year^–1, as reported by observations in smaller areas, cannot be the representative deformation rate in this region. (3) Between the slips caused by regional compression and block rotation, there is a possibility that the sense of slip caused by rigid body rotation in two adjacent blocks is opposite to the slip caused by the tectonic compression. But the magnitude of slip resulting from the tectonic compression is much larger than that due to the block rotation. Thus, in general, the slip pattern on faults as a whole agrees with the sense of tectonic compression in this region. That is to say, the slip caused by regional compression dominates the entire slip budget. (4) Based on (3), some observed slips in contradiction to ENE tectonic stress field may be caused by more localized sources, and have no tectonic significance.     

RECORD OF BLOCK ROTATION AND MAGNETIC FIELD REVERSALS IN THE TETHYAN HIMALAYA (HIDDEN VALLEY, CENTRAL NEPAL)

RECORD OF BLOCK ROTATION AND MAGNETIC FIELD REVERSALS IN THE TETHYAN HIMALAYA (HIDDEN VALLEY, CENTRAL NEPAL)     

坐标投影作图法在川藏线宿瓦卡岩质边坡稳定性分析中的应用

边坡稳定性问题是川藏线工程建设面临的重要问题。野外调查发现基岩边坡失稳一般表现为块体塌落或滑动。基于岩体结构控制理论,作者以川藏线西藏境内宿瓦卡附近的人工高边坡为例,进行了块体边坡稳定性分析。对比现有理论方法的优缺点,采用坐标投影作图法及其计算机化程序CPH。坐标投影作图法是一种以正投影为基础,以分析岩体结构面的几何关系及由其切割出来的块体的稳定性为目的的图解方法。根据现场量测取得的数据,采用CPH程序确定了块体边坡的结构面方程,从而求出各结构面产状。在此基础上建立水平切面图,并求得各块体顶点坐标,计算出块体的表面积及体积。根据极限平衡理论,运用CPH程序进行块体稳定性分析,并求出块体的稳定性系数。通过分析可知,坐标投影作图法及其计算机化的CPH程序在块体边坡稳定性分析中有着很好的应用效果。     

沁水盆地原始水动力场类型及其对煤层气排采的影响

水动力场研究在煤层气勘探开发中具有重要作用。本文首先讨论了基于煤层气井排采资料的水动力场研究方法,在分析沁水盆地柿庄区块原始水动力场特点的基础上,结合前人在盆地其他区块水动力场的研究成果,分析了沁水盆地原始水动力场的类型,进而探讨了水动力场类型对煤层气排采的控制作用。研究表明:沁水盆地自边缘向腹部依次存在重力驱动型、滞流型和压实驱动型三种类型的区域原始水动力场;重力驱动型和滞流型水动力场具备煤层气保存条件,含气量高,煤层气排采效果相对较好,而压实驱动型水动力场虽具备一定的保存条件,但因地层压力较高,煤层气井排水降压困难,产气效果较差;无论是在重力驱动型还是滞流型的区域水动力场中,局部的低势汇聚区具备煤层气保存和排采的有利条件,煤层气开发效果一般较好。在未来煤层气勘探开发过程中,应将重力流驱型或滞流型水动力场所在区域中的局部低势汇聚区作为煤层气开发的甜点区。     

Developing an algorithm for reconstruction of blocky systems in discontinuous media: two-dimensional analysis

Block detection is one of the most important steps in all discontinuous methods of analysis like Discontinuous Deformation Analysis (DDA) and Discrete Element Method (DEM). This is in fact a pre-processing step for those methods. In this study, a comprehensive computational algorithm, for tracing rock block created by discontinuities, has been developed. Using square matrices with integer elements and performing edge regularization step, reduce the size of the matrices due to elimination of unnecessary edges and vertices. Therefore speed and accuracy of block tracing operation will be increased. This algorithm is able to trace and identify all kind of blocks including convex and concave blocks formed by limited or unlimited fractures. The algorithm was programmed in C#.Net by over 3400 code lines and some cases were modeled by the code as example.     

羌塘地块东南部上三叠统巴贡组软沉积变形特征及其意义

羌塘地块东南部巴青、索县一带,在上三叠统巴贡组内发育大量未固结状态下发生的软沉积变形。其形态特征主要表现为枕状、球状、链状以及卷曲状,在平面较大范围内均有发现,纵向上密集分布,100余米长的扎德改剖面中发育有7层明显的软沉积变形构造。经过详细地变形特征描述与比对,认为这些软沉积变形主要是与地震振动相关的震积岩,部分变形清晰地显示出受伸展背景的控制。震积岩是软沉积物对古构造活动的记录,研究区内巴贡组震积岩的密集发育表明巴贡组沉积期区域构造活动强烈,对比晚三叠世早期地层中震积岩的发育状况,发现构造活动在诺利中晚期更加强烈,与羌塘地块中晚三叠世火山岩的年代呼应。     

华南陆块东北部构造特征、成矿作用与动力学机制——来自大地电磁测深的认识

通常认为,华南陆块在元古代由扬子克拉通和华夏地块沿江南造山带碰撞拼合而成,之后经历了陆内造山、洋壳俯冲等多期岩浆—构造活动。但因华南陆块所处的特殊地质构造环境,就目前华南陆块各块体之间的接触关系、江南造山带深部构造特征及区域动力学意义等诸多地质问题争议颇多。本文依托地质调查项目和“深部探测技术与实验研究（SinoProbe）”项目完成的8d和12g两条大地电磁测深剖面,经过精细的数据处理,使用非线性共轭梯度（NLCG）算法对TE+TM模式数据联合反演得到华南陆块东北部岩石圈尺度的二维电性剖面,并用ModEM三维反演代码对全阻抗张量数据反演获得了三维电性模型。对研究区内扬子地块东部、江南造山带以及华夏地块进行电性结构研究,发现研究区内的江南造山带西南段存在扬子地块和华夏地块碰撞镶嵌的构造表现,扬子地块已越过江南造山带,在江绍断裂位置与华夏地块挤压,形成江绍断裂等逆冲型深大断裂,从电性结构推测其现今仍然为活动断裂,但东北段块体之间的接触关系被上侵的地幔物质破坏,江绍、赣东北等断裂的深部结构已被剧烈改造,推测这种深部成矿热物质上涌是形成赣东北以金银矿种为主的岩浆热液型矿床的深部动力原因;研究区东部华夏地块电性特征为高阻的上地壳以及被岩浆底侵而破坏的中下地壳,发育其中的屯溪—鹰潭—安远和上虞—大浦—政和断裂切割深度超过了50 km,为深大断裂构造。结合前人地表侵入岩填图结果,认为由于中生代以来古太平洋板块向欧亚大陆的俯冲,华南陆块东部上地壳被严重破坏,从电性特征推断可能发生过大面积的板片重融,华夏地块东北部地壳相较于西南部厚度明显更小、后期改造严重,受到的太平洋板块俯冲导致的热扰动更剧烈。