一种基于梯度和与一致性组合策略的无缝纹理映射方法研究

针对三维纹理映射中存在接缝、颜色差异大等问题,采用基于梯度值之和的选片算法,结合一致性检查、全局颜色校正和局部颜色校正等策略,消除影像的模糊、重影与色差,实现无缝纹理映射,同时避免影像失焦和障碍物的影响,试验结果表明,该方法纹理映射效果较好。     

等角投影理论和方法综述

等角投影比其它性质投影之研究更为深刻，应用也最为广泛。本文对等角投影的历史发展作了简单回顾，重点对等角投影的数学基础、等角投影的一般公式、等角投影变形量度［８］、具有极值特性的等角投影和探求等角投影的方法等进行了综述。最后提出需要继续研究的若干问题作为等角投影研究展望。     

矿岩界线的自动推连

着重讨论了如何利用人工智能技术进行矿岩界线的自动推断和连接，包括对所研制的基于知识的矿岩界线自动推连系统（ＡＩＳＭＢ）的措述，关于数据与知识的表示和组织、推理过程、策略以及系统实现等内容。     

论自动化和智能化空间对地观测数据处理系统的建立

未来１０年遥感对地观测技术的发展使得遥感影像的获取将走向多种传感器、多分辨率、多谱段和多时相。各国计划发射的对地观测卫星将使我们能够同时获取大量的、不同分辨率的、多谱段的可见光、红外、微波辐射和侧视雷达的数据。从而构成用于全球变化研究、环境监测、资源调查、灾害防治的多层次遥感影像金字塔。为了能够及时地、充分地利用这些对地观测数据来回答地学研究和人类社会发展所面临时的问题，更好地发挥遥感为国民经济建设服务的巨大潜力，必须从技术上建立一个自动化和智能化的空间对地观测数据处理系统。鉴于目前应用滞后于发射，软件落后于硬件的现实情况，本文简要叙述建立自动化和智能化空间对地观测数据处理系统的必要性和可能性，分析建立该系统的主要目标和需解决的关键技术并希望国家集中各有关方面的人力和财力来共同攻关，以建立和完善我国的地球科学信息系统，提高综合研究与深入分析的现代化水平。     

后遥感应用技术研究与地质实践——以东胜—神木地区铀资源勘查为例

介绍了后遥感应用技术提出的背景及技术构成,阐述了该技术的研究内容及取得的地质成果。实践表明,在地质勘查领域,后遥感应用技术比单一遥感技术具有更大的实用价值和更好的应用效果。     

向斜构造煤层开采地表移动规律研究

现行的地表移动预计方法，都是建立在开采工作面主断面为线性分布的基础上，因此，对于非线性分布煤层的预计将会产生较大的误差。本文以随机介质理论为基础，利用曲线积分的方法建立了地表移动与变形预计公式，并且利用数值积分法和叠加原理解算地表移动与变形值，扩大了地表移动预计理论的应用范围，同时也大大提高了预计值的精度     

Geospatial technologies for Chang’e-3 and Chang’e-4 lunar rover missions

ABSTRACT

This paper presents a brief overview of the geospatial technologies developed and applied in Chang’e-3 and Chang’e-4 lunar rover missions. Photogrammetric mapping techniques were used to produce topographic products of the landing site with meter level resolution using orbital images before landing, and to produce centimeter-resolution topographic products in near real-time after landing. Visual positioning techniques were used to determine the locations of the two landers using descent images and orbital basemaps immediately after landing. During surface operations, visual-positioning-based rover localization was performed routinely at each waypoint using Navcam images. The topographic analysis and rover localization results directly supported waypoint-to-waypoint path planning, science target selection and scientific investigations. A GIS-based digital cartography system was also developed to support rover teleoperation.     

Influence of forest fire episodes on the distribution of gaseous air pollutants over Uttarakhand,India

ABSTRACT

Widespread forest fire events occurred in the foothills of North Western Himalaya during 24 April to 2 May 2016 (Event-1) and 20–30 May 2018 (Event-2). Their impacts were investigated on the distribution of pollutant gases ozone (O₃), carbon monoxide (CO), and oxides of nitrogen (NOx) over Uttarakhand using simulations of Weather Research and Forecasting model coupled with chemistry (WRF-Chem) and in-situ observations of these gases over Dehradun, the capital of Uttarakhand. During Event-1, the observed CO mixing ratio over Dehradun increased from 25 April 2016 onwards, attained maximum (705.8 ± 258 ppbv) on 2 May 2016 and subsequently decreased. The rate of increase of daily baseline CO was 29 ppbv/day during HFAP (High Fire Activity Period). During Event-2, daily average concentrations of CO, O₃, and NOx showed systematic increase over Dehradun during HFAP period. The rate of increase of CO was 9 ppbv/day, while it was very small for NOx and O₃. To quantitatively estimate the influence of forest fire emissions, two WRF-Chem simulations were made: one with biomass burning (BB) emissions and other without BB emissions. These simulations showed 52% (34%) enhancement in CO, 52% (32%) enhancement in NOx, and 11% (9%) enhancement in O₃ during HFAP for Event-1 (Event-2). A clear positive correlation (r = 0.89 for Event-1, r = 0.69 for Event-2) was found between ?O₃ (O_{3with BB} minus O_{3without BB}) and ?CO (CO_{with BB} minus CO_{without BB}), indicating rapid production of ozone in the fire plumes. For both the events, the vertical distribution of ?O₃, ?CO, and ?NOx showed that forest fire emissions influenced the air quality upto 6.5 km altitude. Peaks in ?O₃, ?CO, and ?NOx during different days suggested the role of varying dispersion and horizontal mixing of fire plumes.     

免像控无人机在地形图测量中的应用

通过eBeePlus免像控无人机航空摄影测量系统应用于1∶500地形图测绘工程实例,探究其在实践中的制图精度及适用性。使用emotion3、Pix4dMapper等软件进行外业航飞、内业影像处理,对比分析RTK和PPK两种解算方式下的制图精度,两者均满足规范要求,PPK解算方式更适宜在实践中使用;结合Eps软件制作数字线划地图,对于影像中无法提取的房屋边线、植被覆盖区域地物,采取全野外调绘、实测进行补充,阐述了无人机航测与传统数字化测图相结合的作业方式。     

基于遥感技术的近30年中亚地区主要湖泊变化

在全球气候变暖的背景下,研究中亚干旱半干旱地区主要湖泊的变化不仅对内陆水资源管理和可持续发展有着重要意义,也为进一步研究湖泊变化对气候变化和人类活动的响应提供基础。获取1978年MSS、1989年TM、1998年TM及2010年ETM的同季相4期遥感图像数据,通过人工解译提取中亚地区7个湖泊信息,获得近30 a的湖泊面积变化;利用T/P和Envisat雷达高度计提取1992—2012年的湖泊水位信息;基于湖泊面积和水位的时空变化特征分析了湖泊变化的影响因素。结果表明:近30 a来,由于湖泊类型的不同,除萨雷卡梅什湖外的其他6个湖泊均出现不同程度的面积缩减;其中,平原尾闾湖面积变化最显著,高山封闭湖相对平稳,吞吐湖泊的面积变化相对复杂;湖泊的水位变化模式因流域和湖泊类型而异;高山封闭湖泊受气候的影响较大,而吞吐湖泊受人为因素影响显著。