Study of a semi‐active stiffness damper under various earthquake inputs

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

Approximate analysis methods for asymmetric plan base‐isolated buildings

An approximate method for linear analysis of asymmetric‐plan, multistorey buildings is specialized for a single‐storey, base‐isolated structure. To find the mode shapes of the torsionally coupled system, the Rayleigh–Ritz procedure is applied using the torsionally uncoupled modes as Ritz vectors. This approach reduces to analysis of two single‐storey systems, each with vibration properties and eccentricities (labelled ‘effective eccentricities’) similar to corresponding properties of the isolation system or the fixed‐base structure. With certain assumptions, the vibration properties of the coupled system can be expressed explicitly in terms of these single‐storey system properties. Three different methods are developed: the first is a direct application of the Rayleigh–Ritz procedure; the second and third use simplifications for the effective eccentricities, assuming a relatively stiff superstructure. The accuracy of these proposed methods and the rigid structure method in determining responses are assessed for a range of system parameters including eccentricity and structure flexibility. For a subset of systems with equal isolation and structural eccentricities, two of the methods are exact and the third is sufficiently accurate; all three are preferred to the rigid structure method. For systems with zero isolation eccentricity, however, all approximate methods considered are inconsistent and should be applied with caution, only to systems with small structural eccentricities or stiff structures. Copyright © 2001 John Wiley & Sons, Ltd.     

渤海湾盆地北部奥陶纪岩相古地理

渤海湾盆地北部主要包括黄骅坳陷、沧县隆起、冀中坳陷和下辽河坳陷,区内奥陶系厚 6 0 0～ 80 0m,主要由石灰岩和白云岩组成。下奥陶统分为冶里组和亮甲山组,中奥陶统分为下马家沟组、上马家沟组和峰峰组,上统缺失。其中下马家沟组、上马家沟组和峰峰组又进一步划分为下段和上段。早奥陶世冶里期和亮甲山期,本区以局限海环境为主,其内散布着一些潮坪和滩。中奥陶世,本区岩相古地理面貌变化旋回极为明显,下马家沟期早期潮坪广布,晚期以局限海为主;上马家沟期早期又是潮坪广布,晚期以开阔海为主;峰峰期早期潮坪广布,晚期又以开阔海为主。在奥陶纪,本区经历了 4个大的海侵-海退旋回,其中上马家沟期晚期是本区乃至整个华北地台的最大海侵期。     

长江三峡工程蓄水对链子崖危岩体T8-T12缝段稳定性影响研究

三峡水库蓄水后,已治理的链子崖危岩体,特别是T8-T12缝段岩体将受到江水的长期作用和影响,直接关系到防治工程的成败.通过大量实地调查和岩体测试,着重论述水库蓄水对T8-T12裂缝及其充填物的作用和影响;并以此为基础,用改进的Sarma法对该段危岩体的稳定性进行重新计算和评价,得出一系列新的结论:总体上,长江水位抬升后,水对裂缝的溶蚀作用和劈裂作用,使裂缝整体加宽,不利于危岩体的稳定;考虑岩体和承重阻滑键取长期强度和江水位骤然升降,以及地震影响,链子崖危岩体整体稳定性将恶化,但NE20°方向稳定程度好于NW350°.     

鄂尔多斯盆地上古生界高分辨率层序地层分析

按基准面旋回原理，将鄂尔多斯盆地上古生界本溪组（C2b)、太原组（P1t）、山西组(P1s)和下石盒子组（P1xs)划分为3个超长期、8个长期、19个中期和62个短期旋回层序：较为详细地介绍了各级别层序的结构类型、叠加样式和沉积演化序列；建立以长期旋回层序为年代地层框架，中期旋回层序为等时地层对比单元的层序的地层格架；并讨论高分辨率层序地层与天然气藏的关系。     

Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

To afforest the desert with the technology of peat composed of rotten mosses and the sustainable development of the oases

Only by providing the good conditions for the growth of plants can a favorable ecologicalenvironment on which human beings rely for existence be created. The upside-down-T dou-ble-layer water-conserving afforestation way is developed according to the situation of the short-age of water resources, low soil fertility and vast land in the arid areas. The characteristics of theafforestation way are to change the microenvironment in the root area of the plants, provide thefavorable conditions for the growth of plants, and reduce the necessary conditions for the growth ofplants in large areas in the arid regions. Meanwhile, the size of its water-conserving layer can bechanged according to the size of the planted trees. The different ways of the bottom wa-ter-conserving layer can be used according to the requirements. The afforestation way is suitablefor planting trees on a small scale and also for afforesting on a large scale under the adverse cir-cumstances in the arid areas, and has been effectively used in the afforestation in the hinterland ofTaklamakan Desert and the southern marginal zone of Gurbantonggut Desert. The prospects ofthe afforestation way are broad in afforestation and desertification control in the desert regions.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

结构振动控制的半主动磁流变质量驱动器(MR-AMD)

本文首先提出了一种新型的半主动磁流变质量驱动器（MR－AMD），该装置用磁流变驱动器替代AMD的液压驱动系统；其次采用所提出的半主动控制算法仿真分析了MR－AMD用于结构振动控制的有效性；第三，比较了半主动质量驱动器（MR－AMD）、调谐质量阻尼器（TMD）及主动质量驱动器（AMD）对同一模型结构的控制效果。分析结果表明，MR－AMD作为一种半主动质量驱动器有效地降低了结构的反应，其控制效果虽然不如具有相同质量块参数的AMD但却优于TMD，且同AMD一样具有较宽的有效频带范围。