地震前兆仪器实时数据动态与异常报警

利用后台多线程与事件触发技术,实现对地震前兆仪器实时数据的动态展示;通过对实时数据进行长短窗比值与4倍均方差、时均值、日均值等计算,实现实时数据的异常报警功能,并将该功能模块封装成独立控件供用户使用。该控件可实现对全国所有支持实时采集的前兆仪器进行实时数据采集与动态曲线绘制,可实现对各仪器测项实时曲线的浏览观测,具有自动连接、断网重连、网络状态显示、数据异常报警等功能,同时起到仪器监控的目的。     

多接口地图符号库的设计与实现

本文简要介绍了信息时代地图产品的主要表现形式,并针对地图出版软件系统存在的不足,论述了多接口地图符号库设计和应用的必要性。在分析相关技术的基础上,提出了一种地图符号库多接口的架构方式,实现了针对地图不同输出目标,使用同一套地图符号库,输出GDI、EPS、PDF和SVG等不同文档格式的方法。     

Historical aspects of soil erosion in the Mejerda catchment,Tunisia

Abstract

Agricultural use and related water erosion may lead to significant changes in the sedimentological and hydrological characteristics of watersheds, and therefore negative consequences for rural development. This research aimed to put present-day soil erosion of the important Mejerda catchment into a historical context. The catchment of Wadi Mejerda in northern Tunisia has experienced soil erosion due to weather and human impacts for thousands of years. We used historical texts and results from archaeological research that go back to 1000 BC, as well as data collected during the last century. Soil erosion from different types of agricultural landscape management was analysed together with information on the soils' production potential, the hydrographic network and flood frequency. The results showed that water erosion has increased the hydrographic network by 65 km and increased the deltaic plain by as much as 15 km²/century. However, soil productivity has decreased significantly. Moreover, due to in channel sedimentation and river choking, the number of flooding occurrences has multiplied over the last century. Finally, it is shown that water erosion follows a specific cycle of degradation throughout the watershed. These findings should be considered for better water and soil management in the context of semi-arid areas.

Editor Z.W. Kundzewicz

Citation Jebari, S., Berndtsson, R., Lebdi, F., and Bahri, A., 2012. Historical aspects of soil erosion in the Mejerda catchment. Hydrological Sciences Journal, 57 (5), 901–912.     

岷县漳县6.6级地震前区域地壳运动变形背景与断层形变异常特征

利用甘肃岷县漳县6.6级地震区所在的青藏块体东北缘地区的区域水准、GPS、流动重力和跨断层短测线等地形变监测资料,结合地质构造、动力环境和已往的研究结果,分析了不同类型资料反映的震前区域性地壳变形背景、断层形变异常特征和可能的机理.结果认为：（1）岷县漳县6.6级地震前西秦岭、六盘山等构造区不同程度地存在着GPS水平挤压闭锁高应变积累、垂直隆升异常高梯度带和重力升、降差异剧烈变化等中长期背景;（2）震前到震时发震断裂附近及其外围相关构造区域断层形变异常在空间和时间上的起伏波动变化显著,尤其是汶川地震以来的波动变化在一定程度上反映了与本区构造比邻的龙门山断裂带剧烈右旋错动对本区的影响,与本次岷县6.6级地震过程有关;（3）本区有地形变监测资料积累以来缺乏6级以上震例,虽然存在不同程度的中长期形变背景异常,但何时进入短期-短临阶段确实很难把握,需要不断积累总结和探索提高.     

AVO analysis with partial stacking to detect gas anomalies in the GÜEPAJÉ-3D project

We applied analysis AVO with partial stacking to an onshore gas field in order to detect gas at the top of the Ciénaga de Oro formation (FCO), by using seismic gathers of the Güepajé-3D project. The technique was supported by petrophysical analysis of the Ayombe-1 well.The sensitivity of seismic response to changes in the saturating fluid was evaluated by fluid substitution technique in an interval of the Ayombe-1 well. As a result, a class I AVO anomaly at the top of the FCO was observed, even though the gas and water responses were similar. After applying AVO with partial stack technique at the top of FCO, AVO class I anomalies were observed in the Ayombe-1 and Güepajé-1 gas wells and none in the dry Güepajé-3 well. In spite of being reported with gas, the results in the Güepajé-2 well indicated any to an incipient class I anomaly related to a weak seismic response associated to gas.When the technique was applied to the seismic volume of the Güepajé-3D Project, a map of the direct gas indicator was obtained. The map shows a high correlation with the structural surface at top of FCO. Lithic factors such as compaction, cementation and carbonate overlaying the FCO and variable thickness of partial and full saturated layers, may cause anomalies in zones unlikely to contain gas.     

基于GIS的矿产资源专题图制作

结合编制矿产资源专题图,探讨了基于GIS的矿产专题地图的设计流程以及制作方法 ;针对ArcGIS自带符号库不能满足专业需要的现状,重点研究了矿产资源类型符号库的设计与实现方法,并通过绘制徐州市矿产资源分布图进行了验证。     

沉降监测数据的非等间距GM(1,1)模型插补应用

科学、准确、及时地分析和预报建筑物的沉降状况,对其施工和运营极为重要,沉降监测的研究成果也是检验设计和施工的重要手段。由于自然环境的多变性、施工现场的复杂性等各种主、客观因素影响,监测数据有时会出现间断,为了分析沉降规律,需要对缺失数据进行插补。考虑到沉降监测非等时间间隔的特点,建立非等间距GM(1,1)模型及优化背景值的GM(1,1)模型,应用于沉降监测缺失资料的插补工作中,取得了较满意的监测间断数据插补值。     

Spectral material mapping using hyperspectral imagery: a review of spectral matching and library search methods

Imaging spectroscopy is an emerging and versatile technique that finds applications in diverse fields concerned with remote identification, discrimination and mapping of materials. The large amount of spectral data produced by hyperspectral imaging necessitates the development of automated techniques that convert imagery directly into thematic maps. Spectral library search method, a method of choice for organic compound identification by the mass spectroscopy, has caught the attention of researchers as one of the appropriate methods for an efficient exploitation of high quality spectral data available from the hyperspectral imaging systems. Given the apparent increase in the number of papers appearing on the subject as well as the variety of methods proposed, it is reasonable to say that the field of automated interpretation of reflectance spectral data has passed its infancy now gaining important space in the scientific community. We present an overall view of the literature relevant to the development of library search method, the various search algorithms and systems available in the purview for developing an automated hyperspectral data analysis system for material identification.     

Spectral identification of materials by reflectance spectral library search

Spectral library search is emerging as a viable approach for material identification and mapping by reusing spectral knowledge gained from hyperspectral remote sensing across space and time. The potential of retrieving meaningful spectral material identifications in the presence of reflectance of spectra of various material types and with various similarity metrics has been assessed in this study. Test reflectance spectra of various vegetation, minerals, soils and urban material types are identified by searching through the composite reflectance spectral library obtained by combining various institutional reflectance spectral libraries. The accuracy of material identifications under various conditions: (i) in the presence of identical, similar and dissimilar spectra; (ii) in the presence of only identical and dissimilar spectra; and (iii) in the presence of only dissimilar spectra has been assessed with several similarity metrics. Results indicate the possibility of obtaining 100% accurate material identifications by library search if the spectral library contains identical spectra. However, the presence of a large number of similar spectra, despite the presence of identical spectra, is found to increase false positives, thereby reducing the accuracy of retrievals to 82% at best. Further, the accuracy of material identifications in the presence of similar spectra is similarity metric-dependent and varied from about 52% (obtained from Binary Encoding) to 82% (obtained from Normalized Spectral Similarity Score). Overall, results support the possibility of using independent reflectance spectral libraries for material identification while calling for robust spectral similarity metrics.