逐点内插法建立DEM的研究

本文讨论了移动拟合法和加权平均法两种逐点内插法建立DEM的原理及算法实现,并对其中的关键技术——动态确定阈值R和权函数的确定与实现进行了详细讨论。文章在分析常规权函数的基础上提出了一种新的定权方法。最后通过大量试验数据对两种内插方法的精度以及不同权函数的精度分别进行了评定。     

地壳垂直形变模型的研究

本文重点研究了建立整个形变区域的形变速率曲面和形变加速率曲面,同时也研究了求这两种曲面的方法(基于多元逐步回归分析的间接法和直接法),从而使我们对整个形变区域有一个形变的整体概念,也使我们能方便地得出形变区任何一个已知其平面位置的点在任一观测期内的形变量。     

基于地面采样点的MODIS等效反射率计算与分析

本文介绍了等效反射率、平均等效反射率的概念及计算方法,以2006年10月在崇明东滩湿地采集的地面光谱反射率数据和MOD IS地面反射率产品为基础数据,计算了试验区等效反射率和平均等效反射率,开展了平均等效反射率与MOD IS反演反射率的比较分析,对MOD IS地面反射率产品精度作了分析和评价。     

遥感解译在南京市生活垃圾填埋场识别中的应用

运用遥感技术对南京市航空影像进行了解译工作,提取了面积大于10 000 m2的垃圾场位置并进行了实地查证和分析比对,绘制出南京市垃圾填埋场分布图,为南京市垃圾场的适宜性评价工作奠定了基础。     

利用中心差分法进行GPS定速时最佳点数的选取

分析了利用中心差分法进行GPS定速时的主要误差来源,证明了当数据采样率一定时,增加中心差分法的点数可减少微分过程中的截断误差,但同时会放大导出相位率的观测误差,得出中心差分法的最佳点数应使这两种误差之和最小的结论。实验结果表明,当数据采样间隔为1s、载体平均速度和加速度为20m.s-1和0.2m.s-2时,9个点的中心差分法定速精度最高。     

机载激光测深中的波浪改正技术

基于我国新研制的机载激光测深系统基本配置,提出了3种可供选择的波浪改正计算方案(也称为深度值归算方案),具体分析了3种方案的适用条件和应用范围,并从理论上对3种改正模型的计算精度进行了估算。     

利用MATLAB实现图像处理与分析

本文通过对图像的均衡操作、二值图像的处理、小波去噪等实例，介绍了MATLAB进行图像处理和分析的实用方法与技巧，它对各种软钉包、进行图像处理和分析等，提供了高效便捷的方法。     

Development of a 3-D urbanization index using digital terrain models for surface urban heat island effects

This study assesses surface urban heat island (SUHI) effects during heat waves in subtropical areas. Two cities in northern Taiwan, Taipei metropolis and its adjacent medium-sized city, Yilan, were selected for this empirical study. Daytime and night time surface temperature and SUHI intensity of both cities in five heat wave cases were obtained from MODIS Land-Surface Temperature (LST) and compared. In order to assess SUHI in finer spatial scale, an innovated three-dimensional Urbanization Index (3DUI) with a 5-m spatial resolution was developed to quantify urbanization from a 3-D perspective using Digital Terrain Models (DTMs). The correlation between 3DUI and surface temperatures were also assessed. The results obtained showed that the highest SUHI intensity in daytime was 10.2 °C in Taipei and 7.5 °C in Yilan. The SUHI intensity was also higher than that in non-heat-wave days (about 5 °C) in Taipei. The difference in SUHI intensity of both cities could be as small as only 1.0 °C, suggesting that SUHI intensity was enhanced in both large and medium-sized cities during heat waves. Moreover, the surface temperatures of rural areas in Taipei and Yilan were elevated in the intense heat wave cases, suggesting that the SUHI may reach a plateau when the heat waves get stronger and last longer. In addition, the correlation coefficient between 3DUI and surface temperature was greater than 0.6. The innovative 3DUI can be employed to assess the spatial variation of temperatures and SUHI intensity in much finer spatial resolutions than measurements obtained from remote sensing and weather stations. In summary, the empirical results demonstrated intensified SUHI in large and medium-sized cities in subtropical areas during heat waves which could result in heat stress risks of residents. The innovative 3DUI can be employed to identify vulnerable areas in fine spatial resolutions for formulation of heat wave adaptation strategies.     

引潮位的Doodson规格化展开及其精度评定

基于引潮位Doodson规格化展开的基本原理以及ELP/MPP02月球历表、Newcomb太阳历表的结构,设计了一个用以代表三角函数的数据结构;并由此自定义了三角函数的乘法与加法算法,将月球、太阳引潮位分别展开至5阶、3阶,振幅绝对值截断阈值为10-7,在展开过程中对"伪波"进行"滤波"处理后,最终得到包含4 686项展开式的引潮位展开表(其中振幅绝对值超过10-6的展开式有2 441项)。以德国BFO(Black Forest Observatory)测站为例,基于DE431历表,通过天球参考系变换计算得到1950—2050年间时间间隔为1 h的法向引潮力基准序列BFDE431;并根据各个引潮位展开表计算得到相应的法向引潮力序列;通过与BFDE431基准序列求差,得到各个差值序列的统计值。计算结果表明,文中给出的展开表对应的差值序列数值在±58×10~(-11)m·s~(-2)(nGal)以内,均方差为12.5×10~(-11)m·s~(-2),与XI89展开表的精度相当。但由于没有考虑行星及地球扁率的影响,仍未达到HW95和RATGP95展开表的精度水平。     

新型FMCW地基合成孔径雷达在大桥变形监测中的应用

地基合成孔径雷达（GB-SAR）是一种新型的建筑变形监测技术,相较于传统的监测手段,该方法拥有高精度,覆盖面大等优点。基于FMCW技术的Fast-GBSAR系统采用调频连续波技术,相较于国内已有的基于步进连续波技术的类似系统,该系统处理速度提高30倍,并拥有更高的可靠性。Fast-GBSAR在国内已对多座大桥进行了公开测试,监测结果表明Fast-GBSAR测量精度能达到0.01 mm,在变形监测领域极具潜力。