ASM1中污水水质参数与化学计量系数的估测

简要介绍了活性污泥1号模型中14个污水水质参数与5个化学计量系数的估测方法和典型取值。     

Mean flow and variability in the southwestern East Sea

The Ulleung Basin is one of three deep basins that are contained within the East/Japan Sea. Current meter moorings have been maintained in this basin beginning in 1996. The data from these moorings are used to investigate the mean circulation pattern, variability of deep flows, and volume transports of major water masses in the Ulleung Basin with supporting hydrographic data and help from a high-resolution numerical model. The bottom water within the Ulleung Basin, which must enter through a constricted passage from the north, is found to circulate cyclonically—a pattern that seems prevalent throughout the East Sea. A strong current of about 6 cms⁻¹ on average flows southward over the continental slope off the Korean coast underlying the northward East Korean Warm Current as part of the mean abyssal cyclonic circulation. Volume transports of the northward East Korean Warm Current, and southward flowing East Sea Intermediate Water and East Sea Proper Water are estimated to be 1.4 Sv (1 Sv=10⁻⁶ m³ s⁻¹), 0.8 Sv, and 3.0–4.0 Sv, respectively. Deep flow variability involves a wide range of time scales with no apparent seasonal variations, whereas the deep currents in the northern East Sea are known to be strongly seasonal.     

单中继星单低轨卫星的联合定轨精度分析

针对由单中继星和单低轨卫星组成的联合定轨系统,给出了系统内不同轨道卫星摄动项的选取方案和卫星间的可见性判别模型。在模拟出含有白噪声的四程测距观测数据文件的基础上,研究了测距精度和采样弧段对联合定轨中高、低轨卫星定轨精度的影响。得出如下结论:联合定轨更有利于对低轨卫星的轨道改进;同样的采样时间条件下,测距噪声越小定轨精度越高,并且采样时间越短它的影响越明显;同样的测距噪声条件下,所用资料的采样时间越长精度越高,但当测距精度很高时,TDRS达到最好定轨精度所需的采样时间相应有所缩短。并在定出轨道后进行了轨道预报,分析了轨道预报的趋势及精度。     

一种基于启发式算法的等高线局部内插方法

在基于启发式内插等高线算法的基础上提出了一种局部内插方法。首先利用Douglas-Peucker算法提取等高线的特征点,根据特征点判断等高线之间的相似性程度,找出导致等高线出现异常的特征点;然后将相似性程度很低的两条等高线自动分解为若干简单等高线再进行内插。有效地解决了局部弯曲很大、马鞍型地貌等复杂等高线的内插问题。算法已经在以Microstation为平台的数字制图系统中实现并逐渐实用化。     

利用双向缓冲区算法综合海图岛屿

阐述了岛屿综合的内容和原则。介绍了双向缓冲区算法的概念并给出了双向缓冲区算法的定义,研究并证明了双向缓冲区算法的特性。分析了利用双向缓冲区算法综合海图岛屿的原理,并通过实验验证利用双向缓冲区算法综合海图岛屿具有较好的效果。     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

城市框架数据的更新模式及应用研究

分析了利用竣工测量数据、VRS技术及高分辨率影像更新城市框架数据三种模式的可行性,给出了适合青岛地区框架数据的更新方案.     

GPS在计算导弹脱靶量中的应用研究

将GPS技术应用于导弹靶试脱靶量测量,并对计算过程作了较为详细的分析和探讨。试验证明：利用GPS测定脱靶量,测量精度高,简单易行,可以在靶场逐步试验推广。     

基于圆增长特征的点状要素群选取算法

控制点、独立地物等在地图上呈点群状表达,如何高效、合理地实现此类要素的自动综合是地图多尺度表达的重要问题。文中在前人研究的基础上,提出一种基于圆增长特征的点状要素群结构化选取算法,实现点状要素群的自动选取。其基本原理是：根据一个点与其周围点重要性程度的比较来确定该点删除与否,从而确保其拓扑关系和几何信息的正确性。实验证明：该算法实用、有效。     

多尺度空间线状实体形状相似关系的表达与度量

本文对空间数据多尺度表达中线状实体综合前后的形状相似性进行了描述、分析和研究。通过调查统计,得出了衡量线状实体形状相似程度的两个重要参量SIMⅠ、SIMⅡ,基于这两个参量给出了空间线状实体形状相似性的定义以及在不同尺度下线状实体形状相似性的度量方法,并用实例进行验证。为空间数据多尺度表达时线状实体的形状表达提供了一种分析和评价手段。