FDR土壤水分传感器原状土壤标定方法研究

为获得测站准确的土壤水分传感器标定参数,利用自动土壤水分站点的大型原状土壤为样本,在实验室同时进行人工称重观测和仪器自动对比观测,得到一系列的人工自动测量数据,以人工称重数据为准对自动土壤水分传感器进行订正。由于采用原状土壤,样本土壤的质地、密度、土壤颗粒和结合紧密度基本没有受到破坏,订正后的自动土壤体积含水量值能更加真实反映台站实际土壤墒情,能够修订人工对比观测期间由于样本空间不足导致的不合理的田间标定方程。     

ZQZ TF型风传感器冻结故障自动检测装置设计

近年来我国大部分地区在冬、春两季多遭受冻雨灾害,自动气象站的风向风速传感器容易因冻结而无法正常工作。针对冻结故障的实时检测问题,本文设计了一种基于ZQZ-TF型风传感器的故障自动检测装置。该装置通过检测风传感器的工作电压和工作电流,实现对传感器实时状态的监控。同时,结合具体的故障诊断算法,能够快速判断风传感器是否被冻结。系统的核心硬件电路、软件算法可分别集成在自动气象站风向风速数据采集电路和嵌入式软件中,具有结构紧凑、操作简单的特点。经验证,该装置能够实时检测风传感器冻结故障,且工作稳定,检测精度高。     

利用GNSS干涉信号振荡幅度反演土壤湿度

根据干涉效应和GNSS接收机信噪比估计方法,推导了利用GNSS干涉信号幅度进行土壤湿度反演的模型,建模过程考虑了天线增益、土壤介电常数和噪声的影响。提出了使用AMPD算法从含有噪声的归一化干涉功率曲线中提取干涉峰值与谷值,进而反演了土壤介电常数与土壤湿度的方法,并对其进行了仿真。结果表明,利用提取出来的干涉谷值进行反演性能比峰值好,相对稳定准确的卫星仰角范围为5°~25°,湿度大于0.06cm~3/cm~3时反演结果更为准确,标准差在0.01cm~3/cm~3左右波动。     

运用社交网络分析淹水空间信息之关联性

随着社交网络的普遍发展,大量的讯息透过智能手机发布在个人的微博或其他社交网站。台湾地区的社交网站以脸书(Facebook)的使用量最大,平均每天有近千万笔的讯息量,大多数的讯息多以食衣住行或个人讯息为主,但从本研究所撷取自2010年至2015年的数据中显示,公众在社交网站所分享的信息中具有降雨、淹水或相关灾情的讯息,而这些讯息具有极高比例的正确性。由于社交网站无法提供私人讯息,故本研究将从社交信息中,以地点为单位撷取大量的数据信息再辅以语意关键词萃取出有关可作为淹水预判的讯息数据。为检核资料的可性度,本研究透过历史台风数据FLO-2D仿真重建淹水之空间信息进行检核。从研究比对分析中发现,经萃取后的公众信息其与灾害的关联性及正确性相当显着,故透过社交网站中大量的非结构讯息,透过语意及空间的转换,可萃取转化为防灾信息,对广域的都市治理而言,此一讯息将可作为预判区域淹水或防救灾情报之有效参考。     

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

直线型海洋重力仪负漂移原因分析及处理

分析了直线型KSS31M(SN035)海洋重力仪短期负漂移现象的原因、采取的处理措施和经验总结,认为在减震措施不足的情况下,重力仪长期经受震动,而频繁的搬动会使重力仪弹性系统中的金属弹簧产生较大的弹性疲劳,这种影响在短时间内无法完全消除,由此可能导致月漂移超标;陀螺稳定平台轴因承受震动磨损较严重,轴承间隙变大,导致安装在平台之上的重力传感器经过抛物线测试之后不能完全垂直指向地心,重力在水平方向存在一个微小的分量,最终导致重力读数偏小,即短期负漂移;重力基点环境的变化等对漂移也有一定的影响。建议在搬动重力仪后将仪器保持足够长时间的恒温后再开机,密切监测一段时间,以确保仪器处于良好的工作状态。     

定点式声学多普勒流速仪的应用难点与误差分析

定点式声学多普勒流速仪(简称"HADCP")在国内已较为普及,但对其应用却多停留在表面,鲜有人研究其测验误差控制及参数优化方法,影响HADCP测流精度。为解决HADCP使用中的一些疑难问题,从流速仪测验误差表现的三方面对HADCP的测流误差开展讨论。以测验误差为控制指标,对HADCP在使用中各个环节的误差来源及应用难点进行分析,并以多个实例阐明提高仪器应用精度的优化设置方法。按照所论及方法进行对照检查并合理优化,可减小测流误差,提高HADCP测流方案的整体精度。     

一种底座式ADCP流量自动监测探头支撑装置的研制与应用

在流量自动监测系统中,底座式ADCP设备探头位于河底,维修极为不便。该研制装置采用304不锈钢支架配合滑轮、钢索、绞盘等手摇传动系统,将底座式ADCP设备探头从河底传送到水上岸边检修台,实现对设备探头的维护、检修、更换、安装、调试等操作,再通过该装置将底座式ADCP设备探头传送到河底原位,经十里长街等站实际应用,运行稳定可靠,运用极为方便;该装置防磁、防锈、防腐性能良好,为底座式ADCP探头提供一个很好的工作环境,且结构简单,运输方便,可作为中小河流永久流量自动监测站装置使用。     

新型抗高温二次交联凝胶堵漏材料的研制

针对普通凝胶抗温能力较差难以适用于高温地层堵漏作业的问题,通过设计合成抗高温凝胶主剂GN-1并运用二次交联技术,研发了新型抗高温凝胶堵漏材料。优选配方为：淡水+1.5%GN-1+0.15%地面交联剂+1%井下交联剂+0.2%抗氧化剂。通过热滚老化与高温流变测试相结合的手段对凝胶抗温能力进行评价。结果表明,该凝胶材料具有良好的热稳定性,在180 ℃下老化24 h后,7.34 s-1下剪切粘度＞10000 mPa?s。大幅加重后180 ℃老化24 h仍能保持较好的粘弹性。此外还考察了不同温度和pH值下的成胶性能以及与聚磺钻井液体系的配伍性,为抗高温凝胶堵漏材料在现场的应用奠定基础。     

A Method for Automatically Selecting Aids to Navigation Based on their Spatial Influence Domains

To address the limitations of manually selecting aids to navigation (AtNs) on charts, a method for automatically selecting AtNs based on their spatial influence domains (SIDs) is proposed. First, the associations between the spatial attributes of an AtN are analyzed. Second, an SID of the AtN is defined, and a model of the SID is constructed based on the associations between the spatial attributes. Third, the importance of the location of the AtN is weighted based on the SID model. Fourth, an algorithm to automatically select AtNs based on the maximum coverage of the SIDS of preselected AtNs is developed. Finally, several AtNs are selected automatically using the algorithm. The experimental results demonstrate that (1) the proposed method can automatically select AtNs and the results comply with the requirements; (2) the automatic selection can eliminate the human-induced errors or the inconsistent results of manual selections from different operators; and (3) the efficiency of the proposed method is higher than that of current manual methods.