Estimating the orientation error of the Dahan Downhole Accelerometer using the maximum cross-correlation coefficient between the observed and synthetic waves

A new algorithm to correct the orientation error of the accelerometerat the Dahan Downhole Array, Hualien, Taiwan is developed. This algorithmconsists of three stages: (1) rotating two horizontal ground motions on thefree surface to the SH-SVdirection and SH axis offers a reference direction.(2) computing the synthetic downhole SH waves at a downhole station and (3)searching a rotation angle for downhole observation that yields a best waveformmatch between the synthetic and observed downhole seismograms. At this point, the rotated angle corresponding to the best waveform match can be considered as the orientation error. We selected five earthquakes with good data qualityfor analysis. Results show that this algorithm gives a more stable estimationthan a conventional method because it allows the selection of data from a wider time window for analyses. The estimated orientation error of the accelerometers at the Dahan Downhole Array after the 1999 reinstallation are40°, 114° and 285° at depths of 50, 100 and 200 m, respectively.     

Predictive instantaneous optimal control of elastic structures during earthquakes

A predictive instantaneous optimal control (PIOC) algorithm is proposed for controlling the seismic responses of elastic structures. This algorithm compensates for the time delay that happens in practical control applications by predicting the structural response over a period that equals the time delay, and by substituting the predicted response in the instantaneous optimal control (IOC) algorithm. The unique feature of this proposed PIOC algorithm is that it is simple and at the same time compensates for the time delay very effectively. Numerical examples of single degree of freedom structures are presented to compare the performance of PIOC and IOC systems for various time delay magnitudes. Results show that a time delay always causes degradation of control efficiency, but PIOC can greatly reduce this degradation compared to IOC. The effects of the structure's natural periods and the choice of control gains on the degradation induced by the time delay are also analyzed. Results show that shorter natural periods and larger control gains are both more sensitive and more serious to the degradation of control efficiency. Finally, a practical application of PIOC is performed on a six‐story moment‐resisting steel frame. It is demonstrated that PIOC contributes significantly to maintain stability in multiple degree of freedom structures, and at the same time PIOC has a satisfactory control performance. Copyright © 2003 John Wiley & Sons, Ltd.     

Predictive instantaneous optimal control of inelastic structures during earthquakes

A new inelastic structural control algorithm is proposed by incorporating the force analogy method (FAM) with the predictive instantaneous optimal control (PIOC) algorithm. While PIOC is very effective in compensating for the time delay for elastic structures, the FAM is highly efficient in performing the inelastic analysis. Unlike conventional inelastic analysis methods of changing stiffness, the FAM analyzes structures by varying the structural displacement field, and therefore the state transition matrix needs to be computed only once. This greatly simplifies the computation and makes inelastic analysis readily applicable to the PIOC algorithm. The proposed algorithm compensates for the time delay that happens in practical control systems by predicting the inelastic structural response over a period that equals the magnitude of the time delay. A one‐story frame with both strain‐hardening and strain‐softening inelastic characteristics is analyzed using this algorithm. Results show that the proposed control algorithm is feasibile for any inelastic structures. While the control efficiency deteriorates with the increase in magnitude of the time delay, the PIOC maintains acceptable performance within a wide range of time delay magnitudes. Finally, a computer model of a six‐story moment‐resisting steel frame is analyzed to show that PIOC has good control results for real inelastic structures. Copyright © 2003 John Wiley & Sons, Ltd.     

大同市区二十年地下水动态研究

本文首先分析了大同市地下水开采与地下水降深之间的对应关系，同时分析了影响地下水动态的其它因素，然后将地下水开采和大气降水量这两个影响地下水动态的主要因素与地下水动态进行复相关计算，求出相关方程，并进行不同开采量的地下水降深预测，最后根据这些地下水动态研究结果提出了解决大同市水问题几项对策建议。本文的研究结果同时表明，地下水动态研究非常必要且现实意义明显。通过动态变化可以了解地下水的补排及储水介质的变化情况，利用动态变化规律可以预测水文地质条件的变化趋势，根据地下水动态变化特点可采取有针对性的、灵活的取水方案。可以说，地下水动态研究成果在水资源的开发、利用、保护中具有极大的可利用价值。     

机载激光测深中的波浪改正技术

基于我国新研制的机载激光测深系统基本配置，提出了3种可供选择的波浪改正计算方案(也称为深度值归算方案)，具体分析了3种方案的适用条件和应用范围，并从理论上对3种改正模型的计算精度进行了估算。     

一种新的多通道GPS共视资料的处理算法

提出了一种按仰角加权的多通道GPS共视资料处理算法，充分利用了所有观测数据，同时抑制了多径等因素影响，从而可提高共视比对精度。对日本邮政省通讯研究所(CRL)和国家授时中心(NTSC)2002年5月～2003年3月的多通道共视比对的处理结果表明，新的处理算法结果更接近真实钟差。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

应用区域地基全球定位系统观测分析北京地区大气总水汽量

利用2000年6月1日～8月11日北京地区地基全球定位系统(Globe Positioning System)网遥感大气总水汽量试验的观测资料,分析了北京地区夏季大气总水汽量的时空变化,研究了大气总水汽量与日平均温度、地面水汽压和降水的关系.研究结果表明:大气总水汽量存在明显的时空变化,对于地理位置基本相近的台站,海拔高度的影响比较明显,一般情况下高山站的水汽总量低于平原站;在晴天,地面水汽压与大气总水汽量有较好的相关性,而在云雨日,由于高低层大气湿度的变化常常不同步,用地面水汽压估算的大气总水汽量具有较大的偏差;大气总水汽量短时间内的快速增加往往对应有降水过程出现,但总水汽量的大小与降水量之间并没有明显的相关,在降水预报中应综合考虑总水汽量的前期平均水平、短时的增幅和峰值大小等条件的影响.     

A bilinear approximation of the surface relief in terrain correction computations

A new method is presented for the computation of the gravitational attraction of topographic masses when their height information is given on a regular grid. It is shown that the representation of the terrain relief by means of a bilinear surface not only offers a serious alternative to the polyhedra modeling, but also approaches even more smoothly the continuous reality. Inserting a bilinear approximation into the known scheme of deriving closed analytical expressions for the potential and its first-order derivatives for an arbitrarily shaped polyhedron leads to a one-dimensional integration with – apparently – no analytical solution. However, due to the high degree of smoothness of the integrand function, the numerical computation of this integral is very efficient. Numerical tests using synthetic data and a densely sampled digital terrain model in the Bavarian Alps prove that the new method is comparable to or even faster than a terrain modeling using polyhedra.     

GPS与INSAR数据融合研究展望

分析了GPS与INSAR数据融合的必要性与可行性 ,讨论了GPS与INSAR数据融合存在的主要问题 ,进一步探讨了利用GPS数据改善INSAR相位解缠算法 ,利用GPS与INSAR数据融合建立水汽模型和大气层延迟误差改正模型 ,以及GPS高时间分辨率和高平面位置精度与INSAR高空间分辨率和高高程变形精度有效统一的问题。